Surge Protection For Business-Critical ContinuityTM Edco SPA-100T Protection for 120VAC, 60A Outdoor Cabinets The Edco SPA-100T is a medium duty AC Service Arrester which is solid state in design. It is intended for equipment which is located in outdoor cabinets exposed to lightning transients. Application examples are railroad equipment, motor control cabinets, flasher cabinets, and traffic controllers. General Technical Specifications Part Number Edco SPA-100T Maximum Operating Voltage 120 VAC Clamping Voltage 395 VAC Total Peak Surge Current Features 13 kA/Mode/Phase/Total Operating Frequency Fast Response Time 47-63 Hz SPD Technology Solid-state design MOVs Connection Type 10-32 Stainless Steel Stud Operating Temperature Epoxy encapsulated -40˚C to +85˚C Dimensions (Inches) Compact size 0.5H x 1.5W x 2.0L Weight 2 oz. 5 year warranty Mounting Installation Caution 1. Install SPA-100T on load side of breaker as shown. 1" 1.5" 2. Installation and service should be performed by qualified personnel only. 3. Remove all electrical power from circuits before installing SPA-100T. Emerson Network Power. The global leader in enabling Business-Critical ContinuityTM. 1.5" 2" AC Power Embedded Computing Outside Plant Racks and Integrated Cabinets Connectivity Embedded Power Power Switching & Control Services DC Power Monitoring Precision Cooling Surge Protection Emerson Network Power Contact information www.emersonnetworkpower.com/surge Headquarters Surge Protection 100 Emerson Parkway Binghamton, NY 13905 T: (607) 721-8840 T: (800) 288-6169 F: (607) 722-8713 E: [email protected] IO-50165 4/11 Rev. 0 Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2011Emerson Electric Co.