DZϭϬϭϬϬh>W^ ϭϬ͘Ϭ^,Kdd<zZZ/ZZd/&/Z^ϭϬϬs PRIMARY CHARACTERISTICS PD 6.8W VRRM 100V IO 10A VF 0.53V TJ,Max 1℃ TO-277B PACKAGE ● Body Marking Example Marking :10100U VYM 10100U V:Product Lines PIN 3 Y:A.D. late code, EX : 4-2014,5-2015 M:Month, EX : 1-1,2-2,---10-O,11-N,12-D FEATURES PIN 2 PIN 1 MECHANICAL DATA Bypass Diodes for Solar Panels Case：Molded plastic,TO-277B Maximum Junction Temerture 125℃ Polarity：Indicated by cathode band High Thermal Reliability Terminals :Plated terminals, Patented Super Barrier Rectifier solderable per MIL-STD-750,Method Technology 2026 High Forward Surge Capability Ultra Fow Power Loss,High Efficiency Excellent High Temperature Stability Moisture Sensitivity Level 1 Epoxy : UL94-V0 rated flame retardant Maximum Ratings and Electrical Characteristics @TA=25℃ unless otherwise specified Single Phase,half wave,60Hz,resistive or inductive load.For capacitive load,derate current by 20%. Parameter Symbol Peak Repetitive Reverse Voltage VRRM Working Peak Reverse Voltage VRWM MBR10100ULPS Unit 100 V VR(RMS) 70 V IO 10 A IFSM 150 A VR DC blocking voltage RMS Rectified Voltage Average Rectified Output Current(Note1) Non-Repetitive Peak Forward Surge8.3ms Single Half Sine-Wave Superimposed on rated load(JEDEC Method) @IF=5A, Tj=25℃ @IF=10A,Tj=25℃ @IF=5A, Tj=125℃ @IF=10A,Tj=125℃ Peak Reverse Curent @VR=100V,Tj=25℃ At Rated DC Blocking Voltage @VF=100V,Tj=125℃ Forward Voltage Drop VF IR 0.58 0.68 0.53 0.64 70 15 V uA mA Typical Thermal Resistance (Note2) RθjA 73 Junctionto Ambient (Note3) RθjL 31 Tj -55 to + 150 ℃ Tstg -55 to + 150 ℃ Operating junction temperature range storage temperature range ℃/W Note:1.Valid Provided that are kept at ambient temperature at a distance of 9.5mm from the case. 2.Fr-4pcb.2oz.Copper,minimum recommend pad layout .18.8mm×14.4.Anode pad dimensions 5.6mm×14.4mm. 2015.10 www.willas.com.tw Rev.D02 DZϭϬϭϬϬh>W^ ϭϬ͘Ϭ^,Kdd<zZZ/ZZd/&/Z^ϭϬϬs FIG2:Surge Forward Current Capadility IFSM(A) Io(A) FIG1: IF（AV）--TL Derating 20 18 200 180 16 14 140 12 100 10 8 80 6 40 4 2 0 0 50 0 100 If, Instantaneous Forward Current (A) Ir, Reverse Current (uA) FIG3:Typical Reverse Characteristics 100000 Tj=125 ℃ 10000 1000 1 150 TL(℃) Tj=100 ℃ 100 10 10 2 20 100 Number of Cycles FIG4:Instantaneous Foward Voltage 10 1 0 Tj=125 ℃ Tj=25 ℃ 0 20 40 60 VR, Reverse Voltage (Volts) 2015.10 80 100 1 Tj=25 ℃ 100 150 200 250 300 350 400 450 500 550 600 650 700 Vf, Instantaneous Forward Voltage (mV) www.willas.com.tw Rev.D02 DZϭϬϭϬϬh>W^ ϭϬ͘Ϭ^,Kdd<zZZ/ZZd/&/Z^ϭϬϬs Outline Drawing TO-277B .030(0.75) .041(1.05) .077(1.95) .065(1.65) .065(1.65) .077(1.95) .250(6.35) .264(6.70) .006(0.15) .017(0.43) .207(5.25) .228(5.80) .028(0.70) .051(1.30) .039(1.00) .047(1.20) .120(3.05) .142(3.60) .110(2.80) .126(3.20) .148(3.75) .169(4.30) .031(0.80) .056(1.42) Dimensions in inches and (millimeters) 2015.10 www.willas.com.tw Rev.A Rev.D02 DZϭϬϭϬϬh>W^ ϭϬ͘Ϭ^,Kdd<zZZ/ZZd/&/Z^ϭϬϬs TO-277B 039(1.00 ) Suggested Soldering Pad Layout .264(6.70) .148(3.75) . .039(1.00) Dimensions in inches and (millimeters) 2015.10 www.willas.com.tw .059(1.50) .192(4.90) .071(1.80) .150(3.80) RevA Rev.D02 DZϭϬϭϬϬh>W^ ϭϬ͘Ϭ^,Kdd<zZZ/ZZd/&/Z^ϭϬϬs Ordering Information: Device PN MBR10100ULPS ‐T(1) G(2) ‐WS Note: (1) Packing code, Tape & Reel Packing Packing Tape&Reel: 5 Kpcs/Reel (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.10 www.willas.com.tw Rev.D02