Details

Surface Mount Oscillator, TCXO, TCVCXO
Metal Package, 9 mm x 11 mm
Frequency
Output Level
Level
Duty Cycle
Rise / Fall Time
Output Load
Frequency Stability
Frequency Stability at +25° C
Aging
Supply Voltage
Current
Control Voltage (I723 / I724)
Slope
Temperature
Operating
Storage
Environmental
Package Information
I523 / I524 / I723 / I724 Series*
I524 / I724
I523 / I723
1.000 MHz to 40.000 MHz
10.000 MHz to 40.000 MHz
HC-MOS / TTL
Clipped Sine
‘0’ = 0.1 Vcc Max., ‘1’ = 0.9 Vcc Min.
1.0 V p-p Min.
50% ± 10%
10 nS Max.
15 pF, Fo < 50 MHz = 10 TTL, Fo > 50 MHz = 5 LSTTL
20K Ohms / 10 pF
See Frequency Stability Table
± 1 ppm (I523 and I524)
± 1 ppm / Year Max.
See Supply Voltage Table, tolerance ±5 %
40 mA Max. ***
3 mA Max.
1.65 VDC ± 1.5 VDC, ±5 ppm Min. for Vcc = 3.3 VDC, 2.5 VDC ± 2.0 VDC, ±5 ppm Min. for Vcc = 5.0 VDC
Positive
See Operating Temperature Table
-40° C to +85° C
See Appendix B for information
MSL = 2a, Termination = e1 or e4
* I524 = HC-MOS TCXO, I523 = Clipped Sine TCXO, I724 = HC-MOS TCVCXO, I723 = Clipped Sine TCVCXO
6
5
4
Part Number Guide
Package and Output
I523 I524 I723 I724 -
Sample Part Number:
3
2
1
I523 - 1Q3 - 20.000
Operating Temperature
Frequency Stability vs. Temperature
7 = 0° C to +50° C
**O = ±1.5 ppm
Supply Voltage
5 = 5.0 VDC
3 = 3.3 VDC
1 = 0° C to +70° C
**P = ±2.0 ppm
3 = -20° C to +70 C
Q = ±2.5 ppm
2 = -40° C to +85° C
R = ±3.0 ppm
J = ±5.0 ppm
NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and Gnd (pin 2) to minimize power supply noise.
** Not available for all temperature ranges. *** Frequency, supply, and load related parameters.
12/06
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com
Specifications subject to change without notice
F2
Frequency
- 20.000 MHz
Similar pages