SM120FL ~ SM1100FL VOLTAGE 20 ~ 100 V 1.0 A Schottky Barrier Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES SOD-123FL Low forward surge current Ideal for surface mounted applications Low leakage current A F B MECHANICAL DATA Case: JEDEC SOD-123FL, molded plastic over passivated chip Terminals: Solder Plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.0008 ounces, 0.022 gram Mounting position: Any G C E MARKING Product REF. Marking Code Product Marking Code SM120FL S2 SM160FL S6 SM130FL S3 SM180FL S8 SM140FL S4 SM1100FL SA Millimeter Min. Max. D REF. Millimeter Min. Max. A 2.70 2.90 E 0.10 B 1.80 2.00 F 0.80 0.30 1.20 C 1.55 1.25 G 0.35 0.85 D 3.50 3.90 PACKAGE INFORMATION Package MPQ LeaderSize SOD-123FL 2.5K 7’ inch MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25°C ambient temperature unless otherwise specified.Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PART NUMBERS PARAMETERS SYMBOL SM 120FL SM 130FL SM 140FL SM 160FL SM 180FL SM 1100FL UNITS Recurrent Reverse Voltage (Max.) VRRM 20 30 40 60 80 100 V RMS Voltage (Max.) VRMS 14 21 28 42 56 70 V DC Blocking Voltage (Max.) VDC 20 30 40 60 80 100 V VF 0.50 Instantaneous Forward Voltage (Max.) Average Forward Rectified Current (Max.) I(AV) Peak Forward Surge Current IFSM http://www.SeCoSGmbH.com/ 15-Dec-2010 Rev. B 0.55 0.72 1.0 20 0.85 TESTING CONDITIONS V IFM = 1.0A A TJ = 90°C A 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Any changes of specification will not be informed individually. Page 1 of 3 SM120FL ~ SM1100FL VOLTAGE 20 ~ 100 V 1.0 A Schottky Barrier Rectifiers Elektronische Bauelemente Typical thermal resistance junction to 1 ambient Typical thermal resistance junction to 2 lead DC Reverse Current at Rated DC Blocking Voltage (Max.) Typical Junction Capacitance 3 Operating Temperature Range Storage Temperature Range RθJA 200 RθJL 25 IR 0.3 mA CJ 30 pF TJ -55 ~ 125 °C TSTG -55 ~ 150 °C °C / W Notes： 1. Mounted on epoxy substrate with 3 x 3 mm CU pads (≧ 40 m thick). 2. Mounted with minimum recommended pad size, PC Board FR4. 3. Measured at f=1.0MHz, VR=4.0V http://www.SeCoSGmbH.com/ 15-Dec-2010 Rev. B Any changes of specification will not be informed individually. Page 2 of 3 SM120FL ~ SM1100FL Elektronische Bauelemente VOLTAGE 20 ~ 100 V 1.0 A Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES (SM120FL~SM1100FL) http://www.SeCoSGmbH.com/ 15-Dec-2010 Rev. B Any changes of specification will not be informed individually. Page 3 of 3