ϴϬϱϬ,Y>dϭ ϴϬϱϬ,Z>dϭ EWE'ĞŶĞƌĂůWƵƌƉŽƐĞdƌĂŶƐŝƐƚŽƌƐ PRIMARY CHARACTERISTICS PD 225mW VCEO 25V IC 1500mA hFE 150~400 TJ,Max 150℃ SOT-23 PACKAGE Marking Code : +(+& ([+4/7 COLLECTOR 3 +( 1 BASE 2 EMITTER FEATURES MECHANICAL DATA High current capacity in compact Case：Molded plastic,SOT-23 package. Polarity：Shown above IC =1.5A Terminals :Plated terminals, Epitaxial planar type. solderable per MIL-STD-750,Method Moisture Sensitivity Level 1 2026 Epoxy : UL94-V0 rated flame retardant MAXIMUM RATINGS Rating Symbol Max Collector-Emitter Voltage Collector-Base Voltage VCEO VCBO 25 V 40 V Emitter-Base Voltage VEBO 5 1500 V mAdc Collector Current IC Unit THERMAL CHARACTERISTICS Characteristic Symbol Max Unit TA=25°C 225 mW Derate above 25°C 1.8 mW/°C 556 °C/W Alumina Substrate,(2) TA=25°C 300 mW Derate above 25°C 2.4 mW/°C R θJ A 417 °C/W T j,T St g -55 to +150 °C Total Device Dissipation FR-5 Board,(1) PD R θJ A Thermal Resistance,Junction to Ambient Total Device Dissipation PD Thermal Resistance,Junction to Ambient Junction and Storage Temperature 1. FR–5 = 1.0 x 0.75 x 0.062 in. 2. Alumina = 0.4 x 0.3 x 0.024 in. 99.5% alumina. 2015.0ϵ www.willas.com.tw Rev.>0Ϯ ϴϬϱϬ,Y>dϭ ϴϬϱϬ,Z>dϭ EWE'ĞŶĞƌĂůWƵƌƉŽƐĞdƌĂŶƐŝƐƚŽƌƐ ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit V(BR)CEO 25 – – V V(BR)EBO 5 – – V V(BR)CBO 40 – – V Collector Cutoff Current (VCB=35V) ICBO – – 150 nA Emitter Cutoff Current (VEB=4V) IEBO – – 150 nA Typ Max Unit OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage (IC=1.0mA) Emitter-Base Breakdown Voltage (IE=100µΑ) Collector-Base Breakdown Voltage (IC=100µΑ) ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) Characteristic Symbol Min hFE 100 - 600 - - 0.5 ON CHARACTERISTICS DC Current Gain IC=100mA,VCE=1V Collector-Emitter Saturation Voltage (IC=800mA IB=80mA) VCE(S) V Classification of hFE Rank 0DUNLQJ Range 2015.0ϵ Q R 1+& +( 10~0 0~0 www.willas.com.tw Rev.>0Ϯ ϴϬϱϬ,Y>dϭ ϴϬϱϬ,Z>dϭ EWE'ĞŶĞƌĂůWƵƌƉŽƐĞdƌĂŶƐŝƐƚŽƌƐ Outline Drawing .102(2.64) .063(1.60) .047(1.20) .122(3.10) .106(2.70) .083(2.10) .006(0.15)MIN. SOT-23 .008(0.20) .003(0.08) .95 TYP .080(2.04) .070(1.78) .020(0.50) .012(0.30) .049(1.25) .035(0.89) .004(0.10)MAX. Dimensions in inches and (millimeters) 2015.0ϵ www.willas.com.tw Rev.E Rev.>0Ϯ ϴϬϱϬ,Y>dϭ ϴϬϱϬ,Z>dϭ EWE'ĞŶĞƌĂůWƵƌƉŽƐĞdƌĂŶƐŝƐƚŽƌƐ SOT-23 Suggested Soldering Pad Layout 0.0355 (0.90) 0.0435 0.0315 (0.80) (1.10) 0.0435 (1.10) Dimensions in inches and (millimeters) 2015.0ϵ www.willas.com.tw Rev.A Rev.>0Ϯ ϴϬϱϬ,Y>dϭ ϴϬϱϬ,Z>dϭ EWE'ĞŶĞƌĂůWƵƌƉŽƐĞdƌĂŶƐŝƐƚŽƌƐ Reel Taping Sepecification - Surface Mount Device/SOT-23 Reel Packing PACKAGE SOT-23 PER REEL REEL DIA BOX SIZE PER BOX CARTION PER CARTION GROSS WEIGHT EA (m/m) (m/m) EA (m/m) EA (Kg) 3,000 178 192*195*136 30,000 440*410*410 360,000 15.0 Direction tape is pulled PO P1 d P E F w B A C D W1 D2 ITEM Carrier width Carrier length Carrier depth Sprocket hole Reel outside diameter Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Tape width Reel width D1 SYMBOL SPECIFICATIONS (mm) SPECIFICATIONS (inch) A B C d D D1 D2 E F P P0 P1 W W1 3.1 ±0.1 2.85 ±0.1 1.40 ±0.1 1.5 + 0.1/-0 180 + 0/-3 60 + 1/-0 13 ±0.2 1.75 ±0.1 3.5 ±0.05 4.0 ±0.1 4.0 ±0.1 2.0 ±0.05 8.0 ±0.2 9.0 ±0.3 0.122 ±0.004 0.112 ±0.004 0.055 ±0.004 0.059 + 0.004/-0 7.083 + 0/-0.118 2.361 + 0.039/-0 0.512 ±0.008 0.069 ±0.004 0.138 ±0.002 0.157 ±0.004 0.157 ±0.004 0.079 ±0.002 0.315 ±0.008 0.354 ±0.012 NOTE: 1.Devices are packed in accordance with EIAJ stand ETX-7001 and specifications listed above. 2.Available on 7 inch ( 3,000 c.t. ) or 13 inch ( 10,000 c.t. ) diameter reels. 2015.0ϵ www.willas.com.tw Rev.>0Ϯ ϴϬϱϬ,Y>dϭ ϴϬϱϬ,Z>dϭ EWE'ĞŶĞƌĂůWƵƌƉŽƐĞdƌĂŶƐŝƐƚŽƌƐ Ordering Information: Device PN 8050Hx (1)LT1 G(2) ‐WS Packing Tape&Reel: 3 Kpcs/Reel Note: (ϭ)y͗ůĂƐƐŝĨŝĐĂƚŝŽŶŽĨŚ& (Ϯ) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.0ϵ www.willas.com.tw Rev.>0Ϯ