KBP4005G THRU KBP410G 4.0 AMP GLASS PASSIVATED BRIDGE RECTIFIER - 50V-1000V PRIMARY CHARACTERISTICS KBP VRRM 50V,100V,200V,400V 600V,800V,1000V IO 4.0A VF 1.1V PACKAGE ● Body Marking Example Marking :KBP4005G~KBP410G Ex :KBP406G Logo Date Code KBP406G Marking Code I2t A2sec ~ ~ 150℃ TJ,Max V:Product Lines Y:1-digit BC year code, 4-2014,5-2015…etc M:Month, EX : 1-1,2-2,---10-O,11-N,12-D FEATURES MECHANICAL DATA Ideal for printed circuit board Case：Molded plastic,KBP Surge overload rating: 130 Amperes peak Polarity：Shown above Moisture Sensitivity Level 1 Terminals :Plated terminals, solderable per MIL-STD-750,Method 2026 Epoxy : UL94-V0 rated flame retardant MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS SYMBOL Marking Code KBP4005G KBP401G KBP402G KBP404G KBP406G KBP408G KBP410G KBP4005G KBP401G KBP402G KBP404G KBP406G KBP408G KBP410G UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Rating for fusing (t<8.3 ms) Volts IO 4.0 Amps IFSM 130 Amps 2 It A2sec Typical Thermal Resistance (Note 2)40/ 2 RΘJA/RΘJL Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range CHARACTERISTICS Maximum Average Reverse Current at Rated DC Blocking Voltage PF TJ,TSTG -55 to +150 ℃ SYMBOL Maximum Forward Voltage at 4.0A DC KBP4005G KBP401G KBP402G @TC=100℃ KBP404G KBP406G KBP408G KBP410G UNIT 1.1 VF @TC=25℃ ℃/W CJ 5.0 IR 500 Volts μAmps NOTES :1. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 2. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B with 0.47 x 0.47"(12 x 12mm)copper pads. 2015.07 www.willas.com.tw Rev.Dh01 P1 KBP4005G THRU KBP410G 4.0 AMP GLASS PASSIVATED BRIDGE RECTIFIER - 50V-1000V Fig. 1 Forward Current Derating Curve Fig. 2 Typical Fwd Characteristics 5 IF, INSTANTANEOUS FWD CURRENT (A) AVERAGE FORWARD CURRENT, (A) 4.5 4 3.5 3 2.5 2 1.5 1 0.5 RESISTIVE OR INDUCTIVE LOAD 0 0 25 50 75 100 TA= 25°C 1.0 0.1 Pulse Width = 300 µs 0 150 125 10 0 T, TEMPERATURE (°C) 0.4 0.6 0.8 1.0 1.4 Fig. 4 Typical Junction Capacitance 130 100 Cj, JUNCTION CAPACITANCE (pF) Single Half Sine-Wave Pulse Width =8.3ms (JEDEC Method) 120 110 100 90 10 NUMBER OF CYCLES AT 60 Hz 100 TJ = 25°C f = 1MHz 10 0 0 0 1.2 VF, INSTANTANEOUS FWD VOLTAGE (V) Fig. 3 Max Non-Repetitive Peak Fwd Surge Current IFSM , PEAK FWD SURGE CURRENT (A) 0.2 0 10 100 VR, REVERSE VOLTAGE (V) IR, INSTANTANEOUS REVERSE CURRENT (µA) Fig. 5 T ypical Reverse Characteristics (per element) 100 TJ = 125°C 10 1.0 TJ = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 2015.07 www.willas.com.tw Rev.Dh01 P2 KBP4005G THRU KBP410G 4.0 AMP GLASS PASSIVATED BRIDGE RECTIFIER - 50V-1000V Outline Drawing C.110(2.8) .581(14.75) .560(14.22) .057(1.54) .045(1.15) ~ .047(1.20) .027(0.70) .161(4.10) .131(3.35) .441(11.2) .397(10.1) .110(2.8) .071(1.8) ~ KBP .557(14.00)MIN. .034(0.86) .026(0.66) .026(0.65) .011(0.30) .161(4.10) .140(3.56) Dimensions in inches and (millimeters) Rev.G 2015.07 www.willas.com.tw Rev.Dh01 P3 KBP4005G THRU KBP410G 4.0 AMP GLASS PASSIVATED BRIDGE RECTIFIER - 50V-1000V Packing Specification PACKAGE KBP BOX CARTON EA EA 1250 5000 INNER BOX SIZE (mm/mm) 235x235x33 CARTON SIZE (mm/mm) 500*260*295 1250 EA / 1NNER BOX 4 INNER BOX / CARTON 5000 EA / CARTON 2015.07 www.willas.com.tw Rev.Dh01 P4 4.0 AMP GLASS PASSIVATED BRIDGE RECTIFIER - 50V-1000V KBP4005G THRU KBP410G Ordering Information: Device PN Part Number - (1)G(2)-WS Packing Tube Packing:ϱ0pcs/Tube; 1Ϯϱ0pcs/Box Note: 1. Packing code: Empty is Tube Packing 2. RoHS product for packing code suffix ”G”, Halogen free product for packing code suffix "H" . ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.07 www.willas.com.tw Rev.Dh01 P5