LBS205-QH THRU LBS210-QH 2.0A Single-Phase Surface Mount Bridge Rectifiers-50V-1000V PRIMARY CHARACTERISTICS QFNB VRRM 50V,100V,200V, 400V,600V,800V,1000V IO 2.0A VF 1.1V I2t 10.4 A2sec TJ,Max 150℃ PACKAGE Marking code : LBS205~LBS210 Ex :LBS205-QH LBS 205 FEATURES MECHANICAL DATA Low Profile Package : 1.00 mm (typ.) Case：Molded plastic,QFNB Glass passivated chip junciton. Polarity：Marked on body Flat Lead Plastic Package. Terminals :Plated terminals, Ideally Suited forAutomaticAssembly. solderable per Ultra Thin Profile Package for Space MIL-STD-750,Method 2026 Constrained Utilization. Low Forward Voltage Drop. Lead-free parts meet RoHS requirments. Moisture Sensitivity Level 1 Maximum ratings (AT Epoxy : UL94-V0 rated flame retardant o T A=25 C unless otherwise noted) PARAMETER SYMBOLS LBS205-QH LBS21-QH MaUNLQJ LBS22-QH LBS24-QH LBS26-QH LBS28-QH LBS210-QH LBS205 LBS21 LBS22 LBS24 LBS26 LBS28 LBS210 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current IO 2.0 A Peak forward surge current 8.3ms single half sine-wave(JEDEC method) IFSM 0 A Maximum Rating for fusing ( t < 8 . 3 ms ) I 2t 1. As Operating junction temperature range TJ -55 to +150 °C Storage temperature range TSTG -55 to +175 °C Electrical Characteristics (AT PARAMETER 2 o T A=25 C unless otherwise noted) SYMBOLS LBS205-QH LBS21-QH LBS22-QH LBS24-QH LBS26-QH LBS28-QH LBS210-QH UNIT Maximum forward voltage at I F =2.0A VF 1.10 V Maximum DC reverse current at rated DC blocking voltage IR 5.0 500 uA uA at T J =25 ° C at T J =125 ° C Thermal Characteristics PARAMETER Typical thermal resistance j unction to ambient (1) Typical thermal resistance j unction to case (1) SYMBOLS LBS205-QH LBS21-QH RθJA RθJC LBS22-QH LBS24-QH 45 25 LBS26-QH LBS28-QH LBS210-QH UNIT °C/W °C/W per leg Note 1: Mounted on Aluminum substrate 15 x 15 x 1.7mm. 2015.06 www.willas.com.tw Rev.F02 P1 LBS205-QH THRU LBS210-QH 2.0A Single-Phase Surface Mount Bridge Rectifiers-50V-1000V 5DWLQJDQGFKDUDFWHULVWLFFXUYHV/%64+a/%64+ 2.5 2.0 1.5 1.0 Mounted on Aluminum substrate 15 x 15 x 1.7mm. 0.5 0 0 20 40 60 80 100 120 140 160 PEAK FORWARD SURGE CURRENT, AMPERES 80 Pulse Width 8.3ms Single Half-Sire-Wave 60 40 20 CASE TEMPERATURE, ℃ 0 1 10 100 NUMBER OF CYCLES AT 60Hz 10 Tj=25 ° C 1 0.1 0.6 2015.06 0.7 www.willas.com.tw 0.8 0.9 1.0 1.1 1.2 1.3 1.4 Rev.F02 P2 LBS205-QH THRU LBS210-QH 2.0A Single-Phase Surface Mount Bridge Rectifiers-50V-1000V QFNB Outline Drawing .221(5.6) .213(5.4) .249(6.3) .241(6.1) .010(0.25) .006(0.15) .256(6.5) .249(6.3) .044(1.10) .036(0.90) .0256(0.65) .0217(0.55) .0335(0.85) .0296(0.75) .006(0.15) .002(0.05) .1595(4.05) .1556(3.95) Dimensions in inches and (millimeters) 2015.06 www.willas.com.tw Rev.A Rev.F02 P3 2.0A Single-Phase Surface Mount Bridge Rectifiers-50V-1000V Suggested Soldering Pad Layout LBS205-QH THRU LBS210-QH QFNB .0 3 2 ( 0 . 8 0 )MIN .0 3 2 ( 0 . 8 0 )MIN . 1 8 2 ( 4 . 6 0 )REF . 1 5 8 ( 4 . 0 0 )REF Dimensions in inches and (millimeters) RevA 2015.06 www.willas.com.tw Rev.F02 P4 LBS205-QH THRU LBS210-QH 2.0A Single-Phase Surface Mount Bridge Rectifiers-50V-1000V Packing information C D D1 D2 W1 unit:mm Item Symbol Tolerance Carrier width Carrier length Carrier depth Sprocket hole 13" Reel outside diameter 13" Reel inner diameter 7" Reel outside diameter 7" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width Reel width A B C d D D1 D D1 D2 E F P P0 P1 t W W1 0.1 0.1 0.1 0.1 2.0 min 2.0 min 0.5 0.1 0.05 0.1 0.1 0.05 0.1 0.3 1.0 QFNB 5.75 6.65 1.25 1.50 330.00 50.00 13.00 1.75 5.50 8.00 4.00 2.00 0.30 12.00 12~14.4 Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. 2015.06 www.willas.com.tw Rev.F02 P5 2.0A Single-Phase Surface Mount Bridge Rectifiers-50V-1000V LBS205-QH THRU LBS210-QH Ordering Information: Device PN Part Number ‐T(1)H(2)‐WS Note: (1) Packing code, Tape & Reel Packing Packing Tape&Reel: 5 Kpcs/Reel (2) Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.06 www.willas.com.tw Rev.F02 P6