download 440VR67082622.pdf

SPECIFICATION
>Rating:
50mA, 12VDC
>Contact Resistance:
Initial:
100mOHM max.
After Life Test:
2mOHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength:
500VAC for 1 minute
>Stroke:
0.3 ± 0.1 mm
>Bounce:
10ms max.
5,08
O 1,0
O 1,2
TECHNICAL CHARACTERISTICS
5,08
10,16
MATERIAL
>Diffuser plate:
>Actuator:
>Frame:
>Contact:
>Terminal:
>LED Terminal
>Rubber:
12,0
LED cathode colour
(BRIGHT GREEN)
8,2
3,3 4,05
0,8
5,08
0,9
P.C.B. MOUNTING PLAN
10,16
LED cathode colour
(RED)
Switch
11,0
SOLDERING INFORMATION
>Terminal in THT version
>Wave soldering 260°C 10 sec. max.
>Hand soldering under 350°C for 3 sec. max
0,8
B
A
2,54
5,08
PC UL HB
PA66 UL HB
PA66 UL HB, color Black
Stainless Steel with Ag
Brass with Ag
Brass with Tin
Silicone
CIRCUIT DIAGRAM
ENVIRONMENTAL
>Storage condition:
>Operation condition:
>MSL Level:
>Compliance:
HANDLING ADVISE
>ESD prevention methods need to be applicated for manual
handling
and processing by machinery
>Resistors for protection are obligator
12,0
LED SCHEMATIC
(RED)
LED SCHEMATIC
(BRIGHT GREEN)
PACKAGING INFORMATION
>ESD Tray
PN
Force
Scale - 2:1
440 VR670 82622
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. where
higher safety and reliability are especially required or if there is possibility
of direct damage or injury to human body, Wurth Elektronik must be
asked for a written approval.
Projection
GENERAL TOLERANCE
.x = +/- 0,2
.xx = +/- 0,15
Basic material
Date
13-10-09
Checked 13-10-09
DESCRIPTION
Drawn
-40°C ~ +85°C, 60% RH max.
-40°C ~ +85°C
3
ROHS, Reach
Name
Fandrey
Hsu
c LED Terminal: Brass with Tin 15-03-02 DaF
WE
Würth Elektronik
In addition, even electronic component in general electronic equipments,
b revised MatchCode 14-07-28 AL
eiCan
when used in electrical circuits that require high safety, reliability
CAD eiCan
a Bounce 10ms max. 14-04-14 DaF
functions or performance, the sufficient reliability evaluation-check for the
REV
DATE
BY EDV NO 440VR67082622.dft
FILE
safety must be performed before by the user before usage.
220g ± 50gf
Color of LED
Life cycle
Red/Bright Green
100.000
WS-TATL 12x12mm Tact Switch with integrated LED,THT version
Scale
2:1
Position
Drawing.- No. 440VR67082622
SIZE
A4
System :Solid Edge V20
item
1
2
3
4
5
6
7
8
9
10
11
Emitting color
Order code
unit
Peak wavelength typ.
nm
Dominant Wave length
@IF=20mA
typ.nm
spectral Line Half-width
@IF=20mA
typ.nm
Capacitance
VF=0V;f=1MHZ
typ.pF
Forward voltage
typ. V
@IF=20mA
max.V
Reverse current
@VR=5V
uA
ESD
V
Viewing Angle
@20mA 2θ 50% typ
º
Luminous intensity
min. mcd
@IF=20mA
typ. mcd
Material
lens type
Yellow
YS
Red
RS
bright green
VS
green
GS
Blue
BS
590
650
574
520
468
590
630
567
525
470
20
28
20
35
21
20
2
2,5
35
1,95
2,5
15
2,1
2,5
100
3,2
4
100
3,2
4
10
2000
10
2000
10
2000
10
1000
10
1000
145
145
145
145
80
180
AIGaInP
water clear
120
220
AIGaInP
water clear
AIGaInP
water clear
HANDLING ADVISE
1) The solder profile has to be complied with according to the
technical reflow /or wave soldering specification, otherwise no
warranty will be sustained
2) All products are supposed to be used before the end of the period
of 12 months based on the product date-code, if not 100%
solderability can't be warranted
3) Violation of the technical product specifications such as exceeding
the absolute maximum ratings will be result in the loss of warranty
4) It's also recommended to return the products into the original
packaging
5) ESD prevention methods need to be applicated for manual
handling and processing by machinery
145
20
80
20
50
150
50
InGaN
InGaN
water clear
water clear
6) Resistors for protection are obligatory
7) The standard deliveries include values in the range and limitation
as defined in the Electrical & Optical Properties specified in the
datasheet.On each reel, only one bin is sorted and taped. The bin is
defined on intensity, chromaticity coordinate or wavelength and
forward voltage.In order to ensure highest availability, the reel binning
of standard deliveries can vary. A single bin cannot be ordered.Please
contact us in advance, if you need a particular bin sorting before
placing your order to clarify the lead time, MOQ and pricing.
Absolute Maximun Ratings (Ambient Temperature 25C )
Properties
Power Dissipation
Peak Forward current
continuous Forward current
Reverse voltage
ESD Threshold / HBM
Blue & green
Red
120
100
30
5
1000
yellow
75
185
30
5
2000
bright green
75
175
30
5
2000
75
150
30
5
2000
Unit
mW
mA
mA
V
V
GENERAL TOLERANCE
.x = +/- 0,2
.xx = +/- 0,15
Projection
This electronic component is designed and developed with the intention for use
in general electronics equipments.
Before incorporating the components into any equipments in the field such as
aerospace, aviation, nuclear control, submarine, transportation, (automotive
control, train control, ship control), transportation signal, disaster prevention,
medical, public information network etc. where higher safety and reliability are
especially required or if there is possibility of direct damage or injury to human
body, Wurth Elektronik must be asked for a written approval.
In addition, even electronic component in general electronic equipments, when
used in electrical circuits that require high safety, reliability functions or
performance, the sufficient reliability evaluation-check for the safety must be
performed before by the user before usage.
Drawn
Date
13-10-09
Name
Fandrey
CAD
REV
FILE
DATE
BY
DESCRIPTION
SwTLT
WS-TLT 12x12mm Tact Switch with integrated LED, THT
version
Checked
WE
eiCan
Basic material
2:1
Position
Würth Elektronik
Scale
eiCan
Drawing.- No. 440VR67082622
EDV NO 440VR67082622.dft
SIZE
A4
System :Solid Edge V20
Similar pages