Silicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230 KTY 16-6 KTY 10-x KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 Features • • • • • • • • Temperature dependent resistor with positive temperature coefficient Temperature range – 50 °C to + 150 °C (– 60 F to 300 F) Available in SMD or leaded or customized packages Linear output Excellent longterm stability Polarity independent due to symmetrical construction Fast response time Resistance tolerances (R25) of ± 3% or ± 1% SOT-23 Modified TO-92 TO-92 Mini KTY 16-6 KTY 19-6 Data Sheet SOT-23 1:1 1 2000-07-01 KT- and KTY-Series Temperature Sensors Standard Packages Type Marking Ordering Code R25 min R25 max Package (in Ω with Iop = 1 mA) KT 100 KT 110 KT 130 KT 210 KT 230 KT 100 T1 T1 N1 N1 Q62705-K331 Q62705-K332 Q62705-K333 Q62705-K334 Q62705-K335 1940 1940 1940 970 970 2060 2060 2060 1030 1030 TO-92 TO-92 Mini SOT-23 1) TO-92 Mini SOT-23 1) KTY 10-5 KTY 10-6 KTY 10-62 KTY 10-7 KTY 10-5 KTY 10-6 KTY 10-62 KTY 10-7 Q62705-K110 Q62705-K132 Q62705-K71 Q62705-K111 1950 1980 1990 2010 1990 2020 2010 2050 TO-92 TO-92 TO-92 TO-92 KTY 11-5 KTY 11-6 KTY 11-7 T5 T6 T7 Q62705-K245 Q62705-K246 Q62705-K247 1950 1980 2010 1990 2020 2050 TO-92 Mini TO-92 Mini TO-92 Mini KTY 13-5 KTY 13-6 KTY 13-7 T5 T6 T7 Q62705-K249 Q62705-K250 Q62705-K251 1950 1980 2010 1990 2020 2050 SOT-23 1) SOT-23 1) SOT-23 1) KTY 21-5 KTY 21-6 KTY 21-7 N5 N6 N7 Q62705-K258 Q62705-K259 Q62705-K260 975 990 1005 995 1010 1025 TO-92 Mini TO-92 Mini TO-92 Mini KTY 23-5 KTY 23-6 KTY 23-7 N5 N6 N7 Q62705-K262 Q62705-K263 Q62705-K264 975 990 1005 995 1010 1025 SOT-23 1) SOT-23 1) SOT-23 1) Ordering Code R25 min R25 max Screw Thread Custom Packages Type Marking (in Ω with Iop = 1 mA) KTY 16-6 KTY 19-6M KTY 19-6Z none KTY 19M KTY 19Z Connector set for KTY 19 1) Q62705-K128 Q62705-K271 Q62705-K272 1980 1980 1980 2020 2020 2020 – ISO M10x1 NPTF 1/8x27 Q62901-B80 Electrical contact between Pin1 and Pin2 (refer to package outlines drawing). Data Sheet 2 2000-07-01 KT- and KTY-Series Temperature Sensors Absolute Maximum Ratings Parameter Symbol Maximum operating voltage 1) TA ≤ 25 °C, t ≤ 10 ms Vopmax Maximum operating current Iopmax Iopp Peak operating current TA ≤ 25 °C, t ≤ 10 ms 25 Storage temperature range V 5 7 mA 7 10 mA Top Tstg Operating temperature range 1) KT 1x0 KT 2x0 Unit KTY 1x-x KTY 2x-x − 50 … + 150 °C − 50 … + 150 °C When the temperature sensor is operated with long supply leads, it should be protected through the parallel connection of a > 10 nF capacitor to prevent damage to the sensor through induced voltage peaks. Electrical Characteristics Iop = 1 mA Thermal Time Constant (τ); (63% of ∆T) τair (typ.) τoil (typ.) Unit KT 100, KTY 10-x 40 4 s KT 110, KT 210, KTY 11-x, KTY 21-x 11 1.5 KT 130, KT 230, KTY 13-x, KTY 23-x 7 1 KTY 16-6 40 4 KTY 19-6M/Z 40 4 Data Sheet 3 2000-07-01 KT- and KTY-Series Temperature Sensors General Technical Data: KT- and KTY-Series Temperature Sensors These temperature sensors are designed for the measurement, control and regulation of air, gases and liquids within the temperature range of − 50 °C to + 150 °C. The temperature sensing element is an n-conducting silicon crystal in planar technology. The gentle curvature of the characteristic, RT = f (TA), is described as a regression parabola in the following expressions. The resistance of the sensor can be calculated for various temperatures from the following second order equation, valid over the temperature range − 30 °C to + 130 °C. R T = R 25 × ( 1 + α × ∆ T A + β × ∆ T A2 ) = f ( T A ) with: α = 7.88 10− 3 K− 1; β = 1.937 10− 5 K− 2 The temperature factor kT can be derived from this: R k T = -------T- = 1 + α × ∆ T A + β × ∆ T A2 = f ( T A ) R 25 The temperature at the sensor can be calculated from the change in the sensors resistance from the following equation, which approximates the characteristic curve. α2 – 4 × β + 4 × β × k T – α - °C T = 25 + ------------------------------------------------------------------- 2×β Data Sheet 4 2000-07-01 KT- and KTY-Series Temperature Sensors Table 1 Spread of the Temperature Factor kT TA kT °C − 50 − 40 min. 0.506 0.559 typ. 0.518 0.570 max. 0.530 0.581 − 30 − 20 − 10 0 10 0.615 0.676 0.741 0.810 0.883 0.625 0.685 0.748 0.815 0.886 0.635 0.694 0.755 0.821 0.890 20 25 0.960 0.961 0.962 30 40 1.039 1.119 1.040 1.123 1.041 1.126 50 60 1.204 1.291 1.209 1.300 1.215 1.308 70 80 90 100 110 1.383 1.478 1.577 1.680 1.786 1.394 1.492 1.594 1.700 1.810 1.405 1.506 1.611 1.720 1.833 120 130 140 150 1.896 2.010 2.093 2.196 1.923 2.041 2.128 2.235 1.951 2.072 2.163 2.274 1.0 1) 1) Normalising point Data Sheet 5 2000-07-01 KT- and KTY-Series Temperature Sensors Sensor Resistance RT = kT × R25 = f (TA) Sensor Resistance RT = kT × R25 = f (TA) IB = 1 mA; Example: R25 = 2000 Ω IB = 1 mA; Example: R25 = 1000 Ω Typical Dependence of Sensor Resistance on Supply Current Typical Dependence of Sensor Resistance on Supply Current Example: KTY 10-6 in oil at TA = 25 °C Example: KTY 21-6 in oil at TA = 25 °C Data Sheet 6 2000-07-01 KT- and KTY-Series Temperature Sensors Typical Deviation of Sensor Resistance from the Basic Resistance R25 (IB = 1mA) Versus Supply Current Typical Deviation of Sensor Resistance from the Basic Resistance R25 (IB = 1mA) Versus Supply Current Example: KTY 10-6 in oil at TA = 25 °C Example: KTY 21-6 in oil at TA = 25 °C Typical Relationship of the Temperature Factor Typical Relationship of the Temperature Factor R k T = -----T- = f ( T A ) R 25 Data Sheet 1 dR TCT = ---- × --------T = f ( T A ) R T dT A 7 2000-07-01 KT- and KTY-Series Temperature Sensors Definition of the Thermal Time Constant τ Thermal Time constant τ=5s ∆TA = TA2 − TA1; τ = t1 − t0 Peak Current in Air Peak Current in Air R25 = 2000 Ω; I = f (TA) R25 = 1000 Ω; I = f (TA) ^ Data Sheet ^ 8 2000-07-01 KT- and KTY-Series Temperature Sensors Package Outlines Modified TO-92 2 1.6 -0.1 1 KT 100 KTY 10-x 4.2 -0.2 5.2 0.6 +0.02 0.4 +0.05 14.5 -1 1.5 +0.2 0.5 ±0.2 5.2 -0.2 0.4+0.05 2.54 GPD05636 Weight approx. 0.25 g TO-92 Mini KT 110, KT 210 KTY 11-x, KTY 2x-x 2.1-0.2 (1.9) 10˚ 1.7-0.2 2 0.928 1.9-0.2 1 14.1 0.5 ±0.1 0.4 ±0.1 0.2 +0.07 -0.03 0.9 ±0.1 Weight approx. 0.02 g Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book “Package Information”. Data Sheet 9 Dimensions in mm 2000-07-01 KT- and KTY-Series Temperature Sensors SOT-23 (Small Outline Transistor) 1.1 max 0.1 max 2.9 ±0.1 B 3 2.6 max 10˚max +0.2 acc. to DIN 6784 2 0.4 +0.1 -0.05 10˚max 1.3 ±0.1 A 1 KT 130, KT 230 KTY 13-x, KTY 23-x 0.08...0.15 C 0.95 2˚... 30˚ 1.9 0.25 Weight approx. 0.01 g M B C 0.20 M A Pins 1 - 2: R25 Ni-plated Brass Tube Housing with Tefzel Isolated Leadwires KTY 16-6 12 ±0.5 ø3 ±0.15 2 100 ±5 1 3 ±1 abisoliert/ stripped ø1.1 ø0.4 (Draht / wire AWG 26) GPD05638 Weight approx. 0.07 g Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book “Package Information”. SMD = Surface Mounted Device Data Sheet 10 Dimensions in mm 2000-07-01 KT- and KTY-Series Temperature Sensors Stainless Steel Housing, BSS303 (equiv. DIN 1.4305) KTY 19-6M/Z 46 ±0.2 9 ±0.1 6 ±0.1 SW17 12 ±0.1 12 5 17 b 45˚ a Plug-in socket 13.5 3 M10x1 or NPTF 1/8x27 Ø3.8 SW17 Spade terminals A2.8x0.8 DIN 46244 without hole GMX05639 30 ±0.2 Weight approx. 20 g Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book “Package Information”. Data Sheet 11 Dimensions in mm 2000-07-01