Product Catalog(March 2016) PDF(4.4MB)

Electronic Components
http://www.sharp-world.com/products/device/
March 2016
2016-03
CONTENTS
TFT
LCD
2
LCD Modules............................................................................... 2
Imaging
CMOS IMAGE SENSORS / CCDs
7
CMOS Camera Modules.............................................................. 7
CMOS Image Sensors for Digital Cameras /
Digital Camcorders...................................................................... 8
Progressive CCDs....................................................................... 9
1/3-type CCDs........................................................................... 11
1/4-type CCDs........................................................................... 11
DSPs for CCDs.......................................................................... 12
CCD Peripheral ICs/LSIs........................................................... 13
LSI
SYSTEM LSIs
14
Touch Panel System................................................................. 14
Touch Panel System / System LSIs........................................... 15
Touch Panel System / Touch Panel Controller Module............. 15
REG Analog RF
POWER DEVICES /
ANALOG ICs
16
Low Power-Loss Voltage Regulators.........................................
Surface Mount Type Low Power-Loss Voltage Regulators.......
Surface Mount Type Chopper Regulators
(DC-DC Converters)..................................................................
Chopper Regulators (DC-DC Converters).................................
LED Drivers...............................................................................
AC-DC Conversion Type ICs for LED Lighting..........................
Power Amplifiers for Wireless LAN............................................
Front-End Modules for Wireless LAN........................................
LSI Imaging REG
PACKAGES
16
16
18
19
20
21
21
22
23
CSP (Chip Size Package)........................................................... 23
SiP (System in Package)............................................................ 24
Package Lineup.......................................................................... 26
OPTO
OPTOELECTRONICS / IR DEVICES
Photocoupler Lineup..................................................................
Photocouplers............................................................................
Phototransistor Output Type...................................................
OPIC Output...........................................................................
Phototriac Coupler Lineup.........................................................
Phototriac Couplers...................................................................
Solid State Relay Lineup...........................................................
Solid State Relays.....................................................................
DIP type..................................................................................
Photointerrupter Lineup.............................................................
Photointerrupters <Transmissive type>.....................................
Single Phototransistor Output.................................................
OPIC Type..............................................................................
Photointerrupters <Reflective type>..........................................
Single Phototransistor Output.................................................
OPIC Output...........................................................................
Photointerrupters for Specific Applications................................
Transmissive Type..................................................................
Proximity Sensor........................................................................
Proximity Sensor with Integrated Ambient Light Sensor............
Proximity/Gesture Sensor with
Integrated Ambient Light Sensor...............................................
UV Light Sensors.......................................................................
OPIC Light Detectors.................................................................
Phototransistor Lineup...............................................................
Phototransistors.........................................................................
PIN Photodiodes........................................................................
Infrared Emitting Diode Lineup..................................................
Infrared Emitting Diodes............................................................
Optical-Electric Sensor Lineup..................................................
Distance Measuring Sensors.....................................................
Dust Sensor Unit........................................................................
IR Detecting Unit for Remote Control Lineup
(Classified by Form)...................................................................
IR Detecting Units for Remote Control......................................
33
33
34
34
38
40
41
43
44
44
45
46
46
48
49
49
50
51
51
52
52
53
53
54
55
55
56
57
57
58
59
61
62
63
LED
LEDs
64
68
Laser Diodes.............................................................................. 68
RF COMPONENTS / SENSOR
72
Europe: LNBs for Satellite Broadcast........................................ 72
Digital DBS Front-End Units...................................................... 73
Front-End Units for ISDB-T/S.................................................... 74
Front-End Units for DVB-T2/DTMB........................................... 74
Front-End Units for Digital Terrestrial and
Analog Terrestrial Broadcasting................................................. 75
Tuner Module for Multimedia Broadcast Reception................... 76
One-Seg Tuner Module.............................................................. 77
Digital Terrestrial Front-End Unit with EWBS............................ 77
Non-Contact Vital & Motion Sensor Module...............................78
Ionizing Radiation Sensor Module............................................. 78
PM2.5 Sensor Module............................................................... 79
Temperature and Humidity Sensor............................................ 79
Barometer Sensor...................................................................... 80
INDEX........................................................................................ 81
ICs
RF Sensor
Optoelectronics
IR Devices
LASER DIODES
RF Components / SENSOR
LEDs / Laser Diodes
LASER
LCDs
ZENIGATA LEDs for Lighting............................................... 64
LEDs for LCD Backlights........................................................... 67
TFT
LCD MODULES
☆New
■ LCD
product
Modules
<For industrial appliances>
Display
size
(cm)
[ ′′ ]
Model No.
Dot format
H×V
(dot)
Pixel
pitch
H×V
(mm)
Active
area
H×V
(mm)
Display
colors
Power
Outline
LumiWeight
condimensions*1
nance
Interface
(g)
sumption
W×H×D
(cd/m2)
(MAX.)
(W)
(TYP.)
(mm) (TYP.)
(TYP.)
Remarks
8.8
[3.5]
LQ035Q3DG03
320 × RGB 0.2205 ×
× 240
0.2205
70.56 ×
52.92
16.19 M
450
CMOS
0.8
76.9 × 63.9
× 4.7
TYP.
42
8.9
[3.5]
LQ035Q3DY01
240 × RGB
× 320
0.2235 ×
0.2235
53.64 ×
71.52
260 k
600
CMOS
0.5
65.0 × 85.0
× 3.4
40
Advanced Super V,
Low reflection technology
480 × RGB
× 640
0.117 ×
0.117
56.16 ×
74.88
65.0 × 89.2
× 4.4
50
Advanced Super V,
Transflective LCD,
With resistive touch panel
65.0 × 89.2
× 3.6
38
Advanced Super V,
Transflective LCD
109.5 × 69.0
× 9.6
85
Advanced Super V,
Long-life LED backlight,
Built-in LED backlight driver
circuit
105.5 × 67.2
× 4.2
60
With resistive touch panel
105.5 × 67.2
× 3.1
45
62.46 × 105.9
× 2.1
30
Advanced Super V,
Low reflection technology
9.4
[3.7]
LS037V7DW05
250
16.77 M
LS037V7DW06
11
[4.2]
CMOS
0.4
300
Long-life LED backlight
480 × 272
× RGB
0.1935 ×
0.1935
92.88 ×
52.632
480 × 272
× RGB
0.198 ×
0.198
95.04 ×
53.856
260 k
LQ043Y1DY01
480 × RGB
× 800
0.117 ×
0.117
56.16 ×
93.6
16.77 M
315
14
[5.7]
LQ057Q3DC03
320 × 240
× RGB
0.36 ×
0.36
115.2 ×
86.4
260 k
500
CMOS
2.5
144.0 × 104.6
× 12.3
210
Long-life LED backlight, Builtin LED backlight driver circuit
16
[6.4]
LQ064V3DG06
640 × 480
× RGB
0.204 ×
0.204
130.56 ×
97.92
260 k
350
CMOS
3.0
161.3 × 117.0
× 12.0
TYP.
200
Long-life LED backlight, Builtin LED backlight driver circuit
800 × 480
× RGB
0.1905 ×
0.1905
152.4 ×
91.44
16.19 M
380
2.7
170.0 × 110.0
× 9.0
TYP.
175
Advanced Super V,
Long-life LED backlight
1.8
164.9 × 104.0
× 3.9
140
LQ084V1DG43
640 × RGB
× 480
0.267 ×
0.267
LQ084S3LG03
800 × RGB
× 600
22
[8.5]
LQ085Y3DG18
23
[9.1]
LQ091B1LW01
LQ042T1DW01
LQ043T1DG28
11
[4.3]
18
[7.0]
21
[8.4]
LQ043T1DG29
LQ070Y3LW01
LQ070Y3LG01
LQ101K1LY05
26
[10.1]
400
CMOS
2.5
300
360
CMOS
0.6
LVDS
260 k
350
170.88 ×
128.16
260 k
370
CMOS
4.7
221.0 × 152.4
× 9.3
340
Long-life LED backlight, Builtin LED backlight driver circuit
0.213 ×
0.213
170.4 ×
127.8
16.19 M
330
LVDS
4.1
199.5 × 154.0
× 11.6
320
Long-life LED backlight, Builtin LED backlight driver circuit
800 × 480
× RGB
0.231 ×
0.231
184.8 ×
110.88
260 k
250
CMOS
4.1
222.7 × 133.6
× 10.0
TYP.
256
Built-in LED backlight driver
circuit
822 × RGB
× 260
0.267 × 219.474 ×
0.267
69.42
16.77 M
380
LVDS
6.8
240.0 × 86.0
× 10.0
230
Advanced Super V,
Long-life LED backlight,
Built-in LED backlight driver
circuit
1 280 × RGB 0.1695 × 216.96 ×
× 800
0.1695
135.6
16.77 M
400
4.2
230.7 × 152.5
× 8.7
270
5.1
235.3 × 143.0
× 7.9
350
LVDS
☆LQ101W3LG01
LQ104V1DG81/LG81
26
[10.4]
16.19 M
LQ104S1DG2C
LQ104S1LG81
1 024 × RGB 0.2175 × 222.72 ×
× 600
0.2088
125.28
640 × RGB
× 480
0.33 ×
0.33
800 × RGB
× 600
0.264 ×
0.264
211.2 ×
158.4
260 K
260 k
350
Advanced Super V, Low
reflection technology, Longlife LED backlight, Built-in
LED backlight driver circuit
Long-life LED backlight,
Built-in LED backlight driver
circuit
450
CMOS/
LVDS
5.6
246.5 × 179.3
× 12.5
TYP.
500
Long-life LED backlight, Builtin LED backlight driver circuit
350
CMOS
4.5
246.5 × 179.3
× 11.0
550
Long-life LED backlight, Builtin LED backlight driver circuit
420
LVDS
6.1
246.5 × 179.3
× 12.5
500
Long-life LED backlight, Builtin LED backlight driver circuit
All products listed on this page are LED backlight models.
*1 Protrusions such as positioning bosses are not included.
(Note) Please note that the specifications are subject to change without prior notice for product improvement.
2
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
TFT
LCD MODULES
☆New
■ LCD
product
Modules
<For industrial appliances> (cont’d)
Model No.
Dot format
H×V
(dot)
Pixel
pitch
H×V
(mm)
Active
area
H×V
(mm)
Display
colors
LQ121S1DG81
Power
Outline
LumiWeight
condimensions*1
nance
Interface
(g)
sumption
W×H×D
(cd/m2)
(MAX.)
(W)
(TYP.)
(mm) (TYP.)
(TYP.)
6.2
276.0 × 209.0
× 11.0
650
Long-life LED backlight, Builtin LED backlight driver circuit
850
7.4
265.0 × 205.0
× 9.5
550
Long-life LED backlight
450
5.1
276.0 × 209.0
× 9.1
600
450
260 k
LQ121S1DC71
LQ121S1LG84
800 × RGB
× 600
0.3075 ×
0.3075
246.0 ×
184.5
CMOS
260 k
31
[12.1]
LQ121S1LG86
1 500
LQ121K1LG52
1 280 × RGB
× 800
0.204 ×
0.204
LQ121K1LG54
0.204 ×
0.204
LQ121X3LG02
1 024 × RGB 0.240 ×
× 768
0.240
245.8 ×
184.3
12.9
LQ150X1LG11
LQ150X1LG96
Long-life LED backlight,
Built-in LED backlight driver
circuit
320
6.0
278.0 × 184.0
× 8.6
1 200
9.7
259.0 × 205.0
× 7.5
Long-life LED backlight
600
8.2
331.6 × 254.7
× 9.3
Long-life LED backlight, Builtin LED backlight driver circuit
350
6.8
Long-life LED backlight, Builtin LED backlight driver circuit
1 050
14.8
Built-in LED backlight driver
circuit
16.19 M
LQ150X1LG91
16.19 M
LQ150X1LX92
550
326.5 × 253.5
× 9.6
16.19 M
38
[15.0]
LQ150X1LX96
1 024 × RGB 0.297 ×
× 768
0.297
304.1 ×
228.1
500
LVDS
950
Advanced Super V, Long-life
LED backlight, Built-in LED
backlight driver circuit, Haze
value 3%
LQ150X1LW12
10 M
350
10.2
331.6 × 254.7
× 9.3
Advanced Super V, Long-life
LED backlight, Built-in LED
backlight driver circuit
LQ150X1LW94
16.19 M
330
9.8
326.5 × 253.5
× 9.6
Advanced Super V,
Long-life LED backlight,
Built-in LED backlight driver
circuit
LQ150X1LW95
LQ150X1LW96
☆LQ156T3LW03
Advanced Super V, Long-life
LED backlight, Built-in LED
backlight driver circuit
400
16.19 M
39.6
[15.6]
Advanced Super V, Long-life
LED backlight, Built-in LED
backlight driver circuit, Haze
value 3%
10.0
400
Long-life LED backlight, Builtin LED backlight driver circuit,
Wide viewing angle film
Advanced Super V, Long-life
LED backlight, Built-in LED
backlight driver circuit, Haze
value 3%
270
LQ150X1LX95
Long-life LED backlight, Builtin LED backlight driver circuit
278.0 × 184.0
× 8.6
LVDS
16.19 M
260 k
Long-life LED backlight, Builtin LED backlight driver circuit
6.0
430
261.1 ×
163.2
Remarks
10.0
326.5 × 253.5
× 9.6
16.9
363.8 × 215.9
× 10.8
Advanced Super V, Long-life
LED backlight, Built-in LED
backlight driver circuit
500
1 366 × RGB 0.252 × 344.232 ×
16.77 M
× 768
0.252
193.536
400
LVDS
LCD
Display
size
(cm)
[ ′′ ]
950
Advanced Super V,
Long-life LED backlight,
Built-in LED backlight driver
circuit
All products listed on this page are LED backlight models.
*1 Protrusions such as positioning bosses are not included.
(Note) Please note that the specifications are subject to change without prior notice for product improvement.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
3
TFT
LCD MODULES
★ Under
■ LCD
development
Modules
<For industrial appliances> (cont’d)
Display
size
(cm)
[ ′′ ]
Model No.
Dot format
H×V
(dot)
Pixel
pitch
H×V
(mm)
Active
area
H×V
(mm)
LQ156M1LG21
39.6
[15.6]
16.19 M
1 920 × RGB 0.17925 × 344.16 ×
× 1 080
0.17925 193.59
LQ156M3LW01
46.9
[18.5]
Display
colors
★LQ185M3LW01
1 920 × RGB 0.213 × 408.96 ×
× 1 080
0.21300 230.04
48
[19.0]
400
16.77 M
400
376.32 ×
301.056
LQ190E1LX75/T
1 680 × RGB 0.24375 × 409.5 ×
× 1 050
0.24375 255.9375
LQ201U1LW31
1 600 × XYZ
× 1 200
0.255 ×
0.255
LQ201U1LW32
1 600 × RGB
× 1 200
LQ231U1LW32
1 600 × RGB 0.294 ×
× 1 200
0.294
408.0 ×
306.0
470.4 ×
352.8
2ch
LVDS
950
17.9
363.8 × 215.9
× 10.8
(22.6)
430.4 ×
254.6 × 10.8
Long-life LED backlight,
Built-in LED backlight driver
circuit, With brightness
control switch
Advanced Super V,
Long-life LED backlight,
Built-in LED backlight driver
circuit
Advanced Super V,
Long-life LED backlight,
(T.B.D)
Built-in LED backlight driver
circuit
21.7
404.2 × 330.0
Advanced Super V, Long-life
1 850
× 15.0
LED backlight
350
19.6
Advanced Super V, Long-life
LED backlight, Built-in LED
backlight driver circuit
350
LQ190N1LW01
2ch
LVDS
13.6
370.0 × 217.0
(600cd/
× 9.3
m2)
Remarks
450
16.77 M
51.1
[20.1]
59
[23.1]
1 280 × RGB 0.294 ×
× 1 024
0.294
300/
350/
400/
600
16.77 M
LQ190E1LW52
LQ190E1LW72
Power
Outline
LumiWeight
condimensions*1
nance
Interface
(g)
sumption
W×H×D
(cd/m2)
(MAX.)
(W)
(TYP.)
(mm) (TYP.)
(TYP.)
2ch
LVDS
19.6
1 300 Advanced Super V, Long-life
LED backlight, Built-in LED
backlight driver circuit, Haze
value 3%
20.2
Advanced Super V, Long-life
444.0 × 283.3
1 600 LED backlight, Built-in LED
× 15.5
backlight driver circuit
2ch
LVDS
25.7
Advanced Super V, Long-life
LED backlight, Built-in LED
backlight driver circuit,
436.0 × 335.0
2 400 Monochrome
× 20.4
Advanced Super V, Long-life
LED backlight, Built-in LED
backlight driver circuit
2ch
LVDS
65.5
530.0 × 431.5
× 23.9
300
256
1 000
gray scale
16.77 M
330
16.77 M
500
396.0 × 323.6
× 11.5
Advanced Super V, Long-life
4 500 LED backlight, Built-in LED
backlight driver circuit
All products listed on this page are LED backlight models.
*1 Protrusions such as positioning bosses are not included.
(Note) Please note that the specifications are subject to change without prior notice for product improvement.
4
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
TFT
LCD MODULES
☆New product
★ Under development
<For monitors>
80.0
[31.5]
Model No.
☆LQ315D1JG93
Number
of
pixels*1
8 294 400
Dot format
H×V
(dot)
3 840 × RGB
× 2 160
Active
area
H×V
(mm)
Display
colors
697.92 ×
392.58
1.07B
10-bit
Luminance
(cd/m2)
(TYP.)
350
Interface
V-by-One
Outline
dimensions*2
Backlight
W×H×D
(mm) (TYP.)
734.8 ×
430.0 ×
12.0
(26.5*3)
Remarks
Super-high resolution and High
color purity (AdobeRGB100%)
Edge-lit
by using IGZO*4 LCD,
LED
Wide viewing angle:
(without
L/R 178°/ U/D 178°,
driver)
Response time [G to G]:
8 ms (Typ.)
LCD
Display
size
(cm)
[ ′′ ]
*1 Pixel means a set of each RGB dot.
*2 Excluding FPC for connection and other protruding parts.
*3 The thickness of the control board section.
*4 IGZO: an oxide semiconductor consisting of In (Indium), Ga (Gallium), and Zn (Zinc).
(Note) Please note that the specifications are subject to change without prior notice for product improvement.
<For digital signage displays>
Display
size
(cm)
[ ′′ ]
Model No.
Dot format
H×V
(dot)
Pixel
pitch
H×V
(mm)
Active
area
H×V
(mm)
☆LQ695D3LG03
☆LQ695D3LG06
176.56
[69.5]
☆LQ695D1VG04
1 920 ×
RGB ×
1 080
1.07B
0.802 × 1 538.88 × 8-bit +
0.802
865.62
2-bit
FRC
LK800D3LA38
3 840 ×
RGB ×
2 160
1.07B
0.401 × 1 538.88 × 8-bit +
0.401
865.62
2-bit
FRC
1 920 ×
RGB ×
1 080
1.07B
0.9225 × 1 771.20 × 8-bit +
0.9225
996.30
2-bit
FRC
LQ900D3LA01
★LQ900D3LA03
500
LVDS
1 559.4 ×
893.0 ×
27.5
26.5±1.5
Backlight type: edge-lit LED (built-in
driver)
SFR (60 Hz input–60 Hz output)
Viewing angle (L/R / U/D): 176° / 176°
V-by-One
1 559.4 ×
893.0 ×
27.5
27.5±1.5
Backlight type: edge-lit LED (built-in
driver)
SFR (60 Hz input–60 Hz output)
Viewing angle (L/R / U/D): 176° / 176°
LVDS
1 820.2 ×
1 045.3 ×
34.4
34.0±1.0
Backlight type: edge-lit LED (built-in
driver)
DFR (60 Hz input–120 Hz output)
Viewing angle (L/R / U/D): 176° / 176°
LVDS
2 032.0 ×
1 168.0 × 80.0
46.5±1.0
Backlight type: direct-lit LED (built-in
driver)
DFR (120 Hz input–120 Hz output)
Viewing angle (L/R / U/D): 176° / 176°
350
500
350
LK800D3LA48
226.66
[90]
Remarks
700
LK800D3LA28
203.21
[80]
Weight
(kg)
350
☆LQ695D3LG07
☆LQ695D1VG03
Interface
Outline
dimensions*1
W×H×D
(mm) (TYP.)
LumiDisplay nance
Interface
colors (cd/m2)
(TYP.)
500
700
1 920 ×
RGB ×
1 080
1.07B
1.038 × 1 992.96 × 8-bit +
1.038
1 121.04
2-bit
FRC
350
500
*1 Excluding FPC for connection and other protruding parts.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
5
TFT
LCD MODULES
★ Under
development
<For wearable & mobile terminal device (low power consumption LCD)>
Display
size
(cm)
[ ′′ ]
Model No.
Dot format
H×V
(dot)
Pixel
pitch
H×V
(mm)
Active
area
H×V
(mm)
Display
colors
Power
Lumiconsumpnance
Interface
tion*1
(cd/m2)
(µW)
(TYP.)
(TYP.)
Outline
dimensions*2
W×H×D
(mm) (TYP.)
Weight
(g)
(MAX.)
2.4
[0.96]
★LS010B7DH05
192 × 192
0.127 ×
0.127
ø24.384
B/W
No B/L
Serial
40
29.7 × 30.5 × 1.645
(Octagonal)
3.0
2.5
[0.99]
LS010B7DH01
128 × 128
0.1955 ×
0.1955
ø25.024
B/W
No B/L
Serial
45
33.0 × 33.4 × 1.64
(Octagonal)
4.0
3
[1.17]
LS012B4DG01
184 × 38
0.158 ×
0.158
29.072 ×
6.004
B/W
No B/L
Serial
45
35.1 × 11.0 × 0.676
0.7
3.05
[1.2]
LS012B7DH02
240 × 240
0.127 ×
0.127
ø30.48
B/W
No B/L
Serial
50
35.78 × 36.53 × 1.605
(Octagonal)
4.4
3.2
[1.26]
LS013B7DH05
144 × 168
0.145 ×
0.145
20.88 ×
24.36
B/W
No B/L
Serial
35
24.68 × 30.00 × 0.745
1.1
3.3
[1.28]
LS013B7DH03
128 × 128
0.180 ×
0.180
23.04 ×
23.04
B/W
No B/L
Serial
50
26.6 × 30.3 × 0.741
1.3
3.4
[1.33]
LS013B7DH06
128 × RGB
× 128
0.186 ×
0.186
23.808 ×
23.808
8 colors
No B/L
Serial
60
26.82 × 31.3 × 0.745
1.5
6.9
[2.7]
LS027B7DH01
400 × 240
0.1470 ×
0.1470
58.8 ×
35.28
B/W
No B/L
Serial
175
62.8 × 42.82 × 1.64
10.6
11.2
[4.4]
LS044Q7DH01
320 × 240
0.280 ×
0.280
89.6 ×
67.2
B/W
No B/L
Serial
600
94.8 × 75.2 × 1.64
29.3
Remarks
*1 Data update mode (Display pattern: Vertical stripe display)
*2 Protrusion such as positioning bosses are not included.
(Note) Please note that the specifications are subject to change without prior notice for product improvement.
6
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Imaging
■ CMOS
CMOS CAMERA MODULES
Camera Modules
Module configuration: CMOS image sensor, CDS/AGC/10-bit ADC, timing generator, DSP, lens
Color filter: R, G, B primary color mosaic filters
Operating temperature: –20 to 60°C
Lens
1/2.4
type
Optical function
Model No.
OIS function,
auto focus function
RJ63GC600
21M
Auto focus function
RJ63GCE00
Video
performance
21M 24 fps
4K2K 30 fps
1 080p 60 fps
(Normal/HDR)
5 344
x
4 016
Horizontal
ConfiguF No.
viewing
ration
angle
(°)
F2.0
Outline
Supply
dimensions*2
Package*1
voltage
(D x W x H)
(V) TYP.
TYP. (mm)
64
RAW
3.0/2.5/
(Mipi, 4 lanes) 1.8/1.1
6 pcs.
F2.2
Output
signal
74.5
12.0 x 12.0
x 6.52
FPC type
10.6 x 10.8
x 5.125
*1 Contact a SHARP sales office regarding FPC type package.
*2 Height (H) includes the protruding lens section.
RJ63GC600
RJ63GCE00
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
CMOS Image Sensors/
CCDs
Optical Image
format format
Output
pixels
(H x V)
MAX.
7
Imaging
■ CMOS
Optical
format
1 type
2/3 type
8
CMOS IMAGE SENSORS FOR DIGITAL CAMERAS/
DIGITAL CAMCORDERS
Image Sensors for Digital Cameras/Digital Camcorders
Total
pixels
13 110 k
2 320 k
Color filter
Model No.
R, G, B primary
color mosaic
filters
RJ5DY1BA0LT
B/W
RJ5DY2BA0LT
R, G, B primary
color mosaic
filters
RJ52N1BA0LT
B/W
RJ52N2BA0LT
Video
performance
Resolution
Image pixels (H × V)
Pixel size
H × V (µm)
4K2K 60 fps
4 144 × 3 096
3.1 × 3.1
Sensitivity
(mV/Lux-sec) TYP.
Package
1 420
N-LCC120-R898
2 390
3 240
1 080p 120 fps
1 984 × 1 116
5.0 × 5.0
N-LCC120-R898A
6 080
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Imaging
PROGRESSIVE CCDs
High-Sensitivity Image Sensors for Security Usage
Optical
format
Total
pixels
CCDs
Model No.
RJ33B3AA0DT *2
350 k
RJ33B4AA0DT *2
RJ33B3AD0DT *2
RJ33B4AD0DT *2
B/W
Primary
color
VGA 200 fps
(2 ch output)
NTSC 650 TV lines
610 k
RJ3341AA0PB
PAL 650 TV lines
RJ33J3BA0DT
2 170 k
RJ33J4BA0DT
RJ33J3CA0DT *2
2 130 k
660 x 494
7.4 x 7.4
Primary
color
4 500
3 000
976 x 494
5.0 x 7.4
976 x 582
5.0 x 6.3
1 500
1 320 x 976
3.75 x 3.75
1 190
950
470
RJ33N4AA0LT *2
RJ33N3AD0LT *2
RJ31N4EA0DT *2
RJ31N3ED0DT *2
RJ31N3AA0DT
RJ31N4AA0DT
RJ31N3AD0DT
RJ31N4AD0DT
RJ31P4AA0DT *2
RJ31P3AD0DT *2
RJ31P4AD0DT *2
1 080p 50 fps
(2 ch output)
1 080p 25 fps
(1 ch output)
1 080p 50 fps
(2 ch output)
2M 25 fps
(1 ch output)
2M 50 fps
(2 ch output)
2.8M 17 fps
(1 ch output)
2.8M 30 fps
(2 ch output)
B/W
Primary
color
1 928 x 1 088
2.8 x 2.8
650
470
B/W
650
Primary
color
750
B/W
Primary
color
1 928 x 1 088
3.65 x 3.65
1 150
750
B/W
1 150
Primary
color
1 100
B/W
Primary
color
1 644 x 1 236
4.4 x 4.4
1 650
1 100
B/W
1 650
Primary
color
750
B/W
Primary
color
B/W
–125
P-DIP024-0400
–120
P-DIP016-0450
–120
P-DIP024-0400
–110
N-LCC040-R350B
790
RJ33N3AA0LT *2
1 080p 25 fps
(1 ch output)
Package
4 500
1 430
RJ31P3AA0DT *2
2 960 k
B/W
1.3M 30 fps
720p 30 fps
(1 ch output)
Smear ratio
(dB) TYP.
3 000
B/W
RJ31N4ED0DT *2
1/1.8
type
Complementary color
Complementary color
Primary
color
Sensitivity*1
(mV) TYP.
Primary
color
RJ31N3EA0DT *2
2 100 k
Pixel size
H x V (µm)
RJ33J4CA0DT *2
RJ33N4AD0LT *2
2 170 k
Resolution
Image pixels
(H x V)
B/W
RJ3331AA0PB
1 350 k
Color filter
Primary
color
VGA 120 fps
(1 ch output)
520 k
1/3
type
1/2
type
Video performance
1 940 x 1 460
3.69 x 3.69
1 150
750
CMOS Image Sensors/
CCDs
■ Progressive
–115
–120
P-DIP028-0566
–115
1 150
*1 The average G signal output voltage (the average output voltage in the case of the complementary color filter) when a 1,000-lux light source with a 90% reflector is
imaged by a lens of F4 at 1/30 sec (1/25 sec in the case of RJ3341AA0PB) frame accumulation.
*2 This model is the next-generation model. Light efficiency including the near-infrared light region has been drastically improved by our process technology.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
9
Imaging
PROGRESSIVE CCDs
★ Under
■ Progressive
Optical
format
Total
pixels
CCDs (cont'd)
Model No.
RJ32S3AA0DT
RJ32S4AA0DT
2/3
type
5 240 k
RJ32S3AD0DT
RJ32S4AD0DT
RJ32S3AF0DT *2
RJ32S4AF0DT *2
RJ3DT3AA0DT *2
RJ3DT4AA0DT *2
6 090 k
1/1
type
RJ3DT3AD0DT *2
RJ3DT4AD0DT *2
RJ3DT3AF0DT *2
RJ3DT4AF0DT *2
8 290 k
4/3
type
8 340 k
development
RJ3DV3AF0DT *2
RJ3DV4AF0DT *2
★RJ3EV3EF0DT *2
★RJ3EV4EF0DT *2
Video performance
5M 9 fps
(1 ch output)
5M 15 fps
(2 ch output)
5M 30 fps
(4 ch output)
6M 8 fps
(1 ch output)
6M 15 fps
(2 ch output)
6M 30 fps
(4 ch output)
8M 25 fps
(4 ch output)
8M 25 fps
(4 ch output)
Color filter
Resolution
Image pixels
(H x V)
Pixel size
H x V (µm)
Primary
color
B/W
Primary
color
B/W
800
2 456 x 2 058
3.45 x 3.45
530
800
B/W
1 750
2 758 x 2 208
4.54 x 4.54
1 150
1 750
Primary
color
1 150
B/W
1 750
Primary
color
B/W
Primary
color
B/W
–110
P-DIP064-1000
870
1 150
B/W
Package
P-DIP028-0566
580
2 456 x 2 056
Primary
color
Primary
color
Smear ratio
(dB) TYP.
530
B/W
Primary
color
Sensitivity*1
(mV) TYP.
3 320 x 2 496
3.88 x 3.88
3 848 x 2 168
5.14 x 5.14
750
1 100
1 500
2 250
–125
P-DIP064-1000
–120
–125
P-DIP064-1000B
*1 The average G signal output voltage when a 1,000-lux light source with a 90% reflector is imaged by a lens of F4 at 1/30 sec frame accumulation.
*2 This model is the next-generation model. Light efficiency including the near-infrared light region has been drastically improved by our process technology.
10
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Imaging
Total
pixels
CCDs
Standard
270 k
NTSC
320 k
PAL
410 k
NTSC
Color
470 k
PAL
520 k
NTSC
610 k
PAL
Model No.
Resolution
Horizontal
Image pixels
TV lines
(H x V)
RJ2315EA0PB
RJ2315FA0PB *2
RJ2325EA0PB
512 x 492
RJ2355DA0PB
RJ2365DA0PB
RJ2331BA0PB
RJ2341BA0PB
512 x 582
9.6 x 6.34
768 x 494
6.4 x 7.5
480
RJ2365EA0PB *2
RJ2331CA0PB*2
9.6 x 7.5
330
RJ2325FA0PB *2
RJ2355EA0PB *2
Pixel size
H x V (µm)
752 x 582
6.53 x 6.39
976 x 494
5.0 x 7.4
650
976 x 582
RJ2341CA0PB*2
5.0 x 6.3
Sensitivity*1
(mV) TYP.
Smear ratio
(dB) TYP.
Package
4 200
4 500
4 200
–140
4 500
2 700
3 000
2 700
–135
P-DIP016-0450
3 000
2 400
2 600
2 400
–125
2 600
CMOS Image Sensors/
CCDs
■ 1/3-type
1/3-TYPE CCDs / 1/4-TYPE CCDs
*1 The average output voltage measured when imaging a 90% reflector illuminated by a 1,000-lux light source through an optical system set at an f number of F4.0.
*2 This model is the next-generation model. Light efficiency including the near-infrared light region has been drastically improved by our process technology.
■ 1/4-type
Total
pixels
CCDs
Standard
270 k
NTSC
Model No.
Resolution
Horizontal
Image pixels
TV lines
(H x V)
RJ2411FA0PB
Pixel size
H x V (µm)
Sensitivity*1
TYP. (mV)
512 x 492
7.2 x 5.6
1 800
512 x 582
7.2 x 4.73
1 650
768 x 494
4.9 x 5.6
330
320 k
410 k
PAL
RJ2421FA0PB
NTSC
RJ2455DA0PB
Color
Smear ratio
TYP. (dB)
Package
–130
480
1 350
470 k
PAL
RJ2465DA0PB
752 x 582
5.0 x 4.77
520 k
NTSC
RJ2431AA0PB
976 x 494
3.75 x 5.56
610 k
PAL
RJ2441AA0PB
976 x 582
3.75 x 4.47
P-DIP014-0400A
–120
650
1 400
*1 The average output voltage measured when imaging a 90% reflector illuminated by a 1,000-lux light source through an optical system set at an f number of F4.0.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
11
Imaging
■ DSPs
for CCDs
Description
CDS/PGA/ADC
+
DSP
12
DSPs FOR CCDs
Model No.
LR36B16
Features
<CDS/PGA/ADC>
High-speed S/H circuit, high-gain PGA circuit, 12-bit ADC
<DSP>
75-ohm video amplifier, mechanical iris control function,
10-bit DAC, synchronous signal generation circuit,
CCD drive timing generator, AE control function,
AWB control function, LED light control function,
DWDR (gamma transition function),
For 270-k/320-k/410-k/470-k/
lens shading correction function,
520-k/610-kpixel CCDs
auto white blemish compensation function,
mirror image function,
OSD function (5 languages: En., Ch., Fr., Por., Sp.),
privacy mask function, highlight compensation,
motion detection function, 2D noise reduction,
high resolution function, AF detection value output,
NTSC/PAL analog output, Y/C analog output,
UYVY digital output (ITU-R BT656 compatible)
Package
P-HQFN072-1010
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Imaging
CCD PERIPHERAL ICs/LSIs
System Configuration Examples
•<Color
Security Camera System with Three-chip Configuration>
EEP ROM
Analog output for NTSC/PAL
CDS/PGA/12-bit ADC
+
DSP
LR36B16
V driver
Analog output for Y/C
Digital output for UYVY (ITU-R BT656 compatible)
Power
supply
voltage
3.3 V
Four-power-supply CCDs and peripheral ICs/LSIs
CCD
270 kpixels
320 kpixels
410 kpixels
1/3 type
470 kpixels
520 kpixels
610 kpixels
1/4 type
CDS/PGA/ADC + DSP + Video amplifier
CMOS Image Sensors/
CCDs
Four-power-supply
CCD
RJ2315EA0PB
RJ2315FA0PB
RJ2325EA0PB
RJ2325FA0PB
RJ2355DA0PB
RJ2355EA0PB
RJ2365DA0PB
RJ2365EA0PB
RJ2331BA0PB
RJ2331CA0PB
LR36B16
RJ2341BA0PB
RJ2341CA0PB
270 kpixels
RJ2411FA0PB
320 kpixels
RJ2421FA0PB
410 kpixels
RJ2455DA0PB
470 kpixels
RJ2465DA0PB
520 kpixels
RJ2431AA0PB
610 kpixels
RJ2441AA0PB
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
13
LSI
TOUCH PANEL SYSTEM
☆New
■ Touch Panel
Features
•
product
System
1. By adopting Sharp’s proprietary method, approximately eight times more sensitivity (comparison by Sharp)
has been achieved compared with the conventional sequential driving method.*
Capable of sensing a φ2 mm pen touch, multi-touch operation and touch operation using a glove.
2. Contributes to a thinner design of a touch panel display.
A thinner design is achievable because the design is insusceptible to the noise effect, which makes space for the sensor sheets and
the display modules unnecessary.
3. Common user interface from small to large screens allows for a reduction in software development cost.
** When
When comparing
comparing an
an S/N
S/N ratio
ratio of
of 3.58
3.58 determined
determined through
through the
the conventional
conventional sequential
sequential driving
driving method
method using
using pen-touch
pen-touch writing
writing on
on aa 20-inch
20-inch screen
screen with
with an
an S/N
S/N ratio
ratio of
of 30.65
determined
through
Sharp’s
proprietary
parallelparallel
drivingdriving
methodmethod
(measured
by Sharp).
30.65 determined
through
Sharp’s
proprietary
(measured
by Sharp).
•System Configuration
Touch
panel,
7 to 10
inches
Touch
panel,
10 to 15.6
inches
Touch panel,
20 to 32 inches
LR388K5
LR388K4
LR0G964
LR0G967
☆LR0G969
HOST
HOST
HOST
HOST
HOST
Touch
panel,
up to 5
inches
Touch panel,
above 32 inches
Product lines
•Application Examples
Interactive whiteboard
Table computer
Smart TV
PC monitor
Digital signage
Tablet
Notebook PC
Smartphone
eBook
Multiple people can input on the screen
simultaneously, which makes it more
useful on educational sites.
Multi-touch UI on a large screen
for browsing or layout editing.
Pen touch input
is possible.
Operation with a glove
is possible.
14
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
☆New
■ Touch
Model No.
Panel System / System LSIs
Function
LR388K5
Touch panel controller for small-size
screens (up to 5 inches)
LR388K4
Touch panel controller for tablets
(7 to 10 inches)
■ Touch
Model No.
product
Features
• 10-finger multi-touch detection
• Scanning speed: 120 Hz
• Capable of sensing a φ2 mm pen touch
• I2C/SPI interface
• 10-finger multi-touch detection
• Scanning speed: 240 Hz
• Capable of sensing a φ2 mm pen touch
• USB/I2C/SPI interface
• Built-in palm cancellation feature
Supply voltage
(V)
Package
I/O: 1.62 to 3.6
Analog: 2.7 to 3.6
P-VFBGA96P-0606
Core: 1.2±0.12
I/O: 3.3±0.3
Analog: 3.3±0.3
P-VFBGA360P-0613
Supply voltage
(V)
Outline dimensions
(W × D)
(mm)
5
74 × 46
5
60 × 80
5
130 × 100 (Main)
220 × 100 (AFE)
System LSIs
LSI
TOUCH PANEL SYSTEM / SYSTEM LSIs /
TOUCH PANEL SYSTEM / TOUCH PANELCONTROLLER MODULE
Panel System / Touch Panel Controller Module
Function
LR0G964
Touch panel controller module
for midium-size screens
(10 to 15.6 inches)
LR0G967
Touch panel controller module
for midium-size screens
(15 to 32 inches)
☆LR0G969
Touch panel controller module
for large-size screens
(Over 32 inches)
Features
• 10-finger multi-touch detection
• Scanning speed: 240 Hz
• Capable of sensing a φ2 mm pen touch
• Built-in palm cancellation feature
• USB interface
• Built-in power supply circuit
• 10-finger multi-touch detection
• Scanning speed: 240 Hz
• Capable of sensing a φ2 mm pen touch
• Built-in palm cancellation feature
• USB interface
• Built-in power supply circuit
• 50-finger multi-touch detection
• Scanning speed: 240 Hz
• Capable of sensing a φ2 mm pen touch
• Built-in palm cancellation feature
• USB interface
• Built-in power supply circuit
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
15
REG
Power-Loss Voltage Regulators
• TO-220 Type
PQ30RV11J00H
1
1.4
2
3.3, 5,
9, 12
3.3, 5,
9, 12
24
15
20
○
○
○
○
A
±2.5
1.0
○
○
○
○
A
○
○
△*6
○
○
2
3
1.5 to
30
18
35
○
○
△*6
○
○
B
2
○
○
△*6
○
○
B
±2*4
0.5
20
Lead forming
available
Variable output
voltage
Package
Package
shape
type*7
TO-220
B
At self-cooling
With infinite heat sink attached
The xxx in the model No. refer to the output voltage values of the model (e.g. 050 for 5 V, 120 for 12 V, 015 for 1.5 V).
Reference voltage precision
Current ratings are defined individually.
△ : Available by adding circuit
Refer to page 31
Mount Type Low Power-Loss Voltage Regulators
•SOT-89 Type
(Ta = 25°C)
PQ1LAxx5MSPQ▲
Compact, high radiation package,
ceramic capacitor compatible
Ceramic capacitor compatible,
variable output voltage
PQ1LAX95MSPQ▲
0.5
15
0.9
Output
voltage
Vo*2
(V) TYP.
Output Dropout
voltage voltage
precision VI-O*3
(V)
(%)
1.2, 1.5, 1.8,
2.5, 3.3, 5.0
±2.0
1.5 to 9.0
±2.0*4
0.7
○
○
○
○
○
○
○
○
Variable output
voltage
Features
Built-in functions
Low dissipation
current at OFF state
Power
Output Input
dissipacurrent voltage
tion
Io
Vin
Pd*1
(A)
(V)
(W)
Model No.
Electrical characteristics
ON/OFF control
Absolute maximum
ratings
Overcurrent
protection
■ Surface
Overheat
protection
*1
*2
*3
*4
*5
*6
*7
0.5
15
1.5
PQ30RV31J00H
Low dissipation
current at OFF state
1
Variable output voltage
±3
Power
Output Input dissipation Output Output Dropout
(W)
current voltage
voltage voltage voltage
Io
Vin
Vo*3 precision VI-O*5
(V) TYP. (%)
(V)
(A)
(V)
Pd*1 Pd*2
PQxxxRDA1SZH series ASO protection function,
low dissipation current at
PQxxxRDA2SZH series OFF state (Iqs: 5 µA (MAX.))
PQ30RV21J00H
ON/OFF control
Features
Built-in functions
Overcurrent
protection
Model No.
(Ta = 25°C)
Absolute maximum ratings Electrical characteristics
Overheat
protection
■ Low
LOW POWER-LOSS VOLTAGE REGULATORS /
SURFACE MOUNT TYPE LOW POWER-LOSS VOLTAGE REGULATORS
○
Package
SOT-89
*1 When mounted on a board
*2 The xx in the model No. refer to the output voltage values of the model (e.g. 25 for 2.5 V, 50 for 5.0 V).
*3 Current ratings are defined individually.
*4 Reference voltage precision
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
16
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SURFACE MOUNT TYPE
LOW POWER-LOSS VOLTAGE REGULATORS
•SC-63 Type (1) Output Voltage Fixed Type
PQxxxDNA1ZPH series
PQxxxENA1ZPH series▲
PQxxxGN1HZPH series
24
8
○
Minimum operating input voltage:
2.35 V,
PQxxxENB1ZPH series▲
ceramic capacitor compatible,
solder dip compatible lead shape
PQxxxENAHZPH series▲
PQxxxGN01ZPH series
○
Minimum operating input voltage:
1.7 V (Dual power supply type),
ceramic capacitor compatible,
solder dip compatible lead shape
8
○
10
5
○
○
3.3, 5,
9, 12
○
1.0, 1.2
Taped package
Package
shape
type*4
○
○
○
○
–
○
F
○
○
○
○
–
○
F
0.3
○
○
○
○
–
○
0.9
○
○
○
○
–
○
F
○
○
–
○
F
○
○
–
○
F
±2.5
0.5
1.5, 1.8,
2.5, 3.3
1.2, 1.5,
1.8, 2.5, ±2.0
3.3
1.5, 1.8,
2.5, 3.3
8
5.5
Package
±30
mV
–
SC-63
F
Power Devices/
Analog ICs
Ceramic capacitor compatible,
ASO protection function,
low dissipation current at OFF
state (Iqs: 5 µA (MAX.)),
solder dip compatible lead shape
Output Output
Dropout
voltage voltage
voltage
Vo*2 preciVI-O*3
(V)
sion
(V)
TYP.
(%)
Built-in functions
Low dissipation
current at OFF state
Variable output
voltage
Features
Electrical characteristics
ON/OFF control
Model No.
(Ta = 25°C)
Absolute maximum ratings
Output
current
Power
Input
Io
dissivoltage
(A)
pation
Vin
Pd*1
(V)
(W)
0.5 1 1.5
Overheat
protection
Overcurrent
protection
REG
*1 With infinite heat sink attached
*2 The xxx in the model No. refer to the output voltage values of the model (e.g. 033 for 3.3 V, 050 for 5 V, 120 for 12 V).
*3 Current ratings are defined individually.
*4 Refer to page 31
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
•SC-63 Type (2) Output Voltage Variable Type
PQ070XNA1ZPH▲
PQ070XNAHZPH▲
PQ070XNA2ZPH▲
PQ070XNB1ZPH▲
PQ035ZN01ZPH
PQ035ZN1HZPH
PQ200WNA1ZPH
PQ200WN3MZPH
○
Minimum operating input voltage:
2.35 V,
ceramic capacitor compatible,
solder dip compatible lead shape
○
○
10
8
1.5 to 7
±2.0*2
(2 A)
○
Reference voltage (Vref): 0.6 V,
○
minimum operating input voltage:
1.7 V (Dual power supply type),
ceramic capacitor compatible,
○
solder dip compatible lead shape
Minimum operating input voltage:
3.5 V, ASO protection function,
low dissipation current at OFF
○
state (Iqs: 5 µA (MAX.)),
ceramic capacitor compatible,
solder dip compatible lead shape
Minimum operating input voltage:
5.5 V,
○
low dissipation current at OFF
(0.3)
state (Iqs: 5 µA (MAX.)),
ceramic capacitor compatible,
current limit: 800 mA
5
1.2 to 7
0.8 to
3.5
5.5
±30
mV
Taped package
Low dissipation
current at OFF state
Variable output
voltage
ON/OFF control
Features
Built-in functions
Overheat
protection
Overcurrent
protection
Model No.
(Ta = 25°C)
Absolute maximum ratings Electrical characteristics
Output
current
Power Output Output
Input
Dropout
Io
dissi- voltage voltage
voltage
voltage
(A)
pation Vo
preciVin
VI-O*3
Pd*1
(V)
sion
(V)
(V)
(W)
TYP.
(%)
0.5 1 1.5
Package
Package
shape
type*4
0.5
○
○
○
○
○
○
F
0.9
○
○
○
○
○
○
F
0.5
○
○
○
○
○
○
F
0.3
○
○
○
○
○
○
F
–
○
○
○
○
F
–
○
○
○
○
○
○
○
○
○
○
F
○
○
○
○
○
○
F
SC-63
F
8
3.0 to
20
±2.5*2
24
6.8
5.0 to
20
0.5
*1 With infinite heat sink attached
*2 Reference voltage precision
*3 Current ratings are defined individually.
*4 Refer to page 31
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
17
•SOP-8 Type
(Ta = 25°C)
Features
PQ1DX095MZPQ▲
Built-in sink source function
(For DDR II memory)
Built-in functions
Output
current
Io
(A)
Input
voltage
Vin
(V)
Power
dissipation
Pd*1
(W)
Output voltage
Vo
(V) TYP.
Output
voltage
precision*2
(mV)
Taped package
Model No.
Electrical characteristics
Overcurrent
protection
Absolute maximum ratings
Overheat
protection
REG
SURFACE MOUNT TYPE LOW POWER-LOSS VOLTAGE REGULATORS /
SURFACE MOUNT TYPE CHOPPER REGULATORS
Package
±0.8
6
0.6
VDD x 1/2
(VDDQ: 1.5 V (MIN.))
±25
○
○
○
SOP-8
*1 When mounted on a board
*2 Reference voltage precision
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
■ Surface
Mount Type Chopper Regulators (DC-DC Converters)
Model No.
Absolute
maximum ratings
Switch- Power Input
ing
dissipa- voltage
range
current
tion
Vin
Isw
Pd*1
(W)
(V)
(A)
Features
• High switching voltage: 40 V (MAX.)
• For tuner power supply
• Variable oscillation frequency
• Ceramic capacitor compatible
• PWM chopper regulator
(high oscillation frequency)
PQ1CN38M2ZPH
• Output ON/OFF control function
• Overcurrent/overheat protection circuits
• For light load
• PWM chopper regulator
PQ1CN41H2ZPH
(high oscillation frequency)
• Overcurrent/overheat protection circuits
• Bootstrap system for high efficiency
(Efficiency 90% (TYP.))
PQ1CX41H2ZPQ▲
• Low voltage output: 0.8 V (MIN.)
• Ceramic capacitor compatible
• Bootstrap system for high efficiency
(Efficiency 89% (TYP.))
PQ1CX53H2MPQ▲
• Low voltage output: 0.8 V (MIN.)
• Ceramic capacitor compatible
• Bootstrap system for high efficiency
(Efficiency 88% (TYP.))
PQ1CX61H1ZPQ▲
• Low voltage output: 1.0 V (MIN.)
• Ceramic capacitor compatible
PQ6CU12X2APQ▲
0.25
0.35
0.8
8
1.5
1.5
3.5
1.5
8
3.0 to
5.5
Electrical characteristics
Package
Output
voltage*2
Vo
(V)
Output
Oscillation
saturation
Output frequency
voltage
type
fo (Hz)
Vsat (V)
TYP.
TYP.
up to 36
Stepup
StepVREF*3 to 35
down
(step-down
type)/
4.5 to
REF
to
–30
–V
40
(inverting type)
Stepdown
0.8
When 4.75 to
mounted
27
on board
2
When 4.75 to
mounted
27
on board
0.8
When 4.75 to
mounted
28
on board
(Ta = 25°C)
300 k to
800 k
300 k
Outline
shape
type*4
Ron
SOT-23-6W
TYP. 1.7Ω
0.9
F
SC-63
300 k
0.9
0.8 to 20
Stepdown
400 k
RDSon
SOP-8
TYP. 0.45Ω
0.8 to 16
Stepdown
400 k
RDSon
USB-8
TYP. 0.15Ω
1.0 to 18.9
Stepdown
900 k
RDSon
SOP-8
TYP. 0.55Ω
F
*1 With infinite heat sink attached or when mounted on a board listed in the specification sheets.
*2 Output variable range (step-down/inversion).
*3 VREF nearly equal to 1.26 V
*4 Refer to page 31
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
18
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
REG
Regulators (DC-DC Converters)
• TO-220 Type
(Ta = 25°C)
Model No.
PQ1CG21H2FZH
PQ1CG41H2FZH
PQ1CG2032FZH
PQ1CG3032FZH
Absolute
Electrical characteristics
maximum ratings
Switch- Power Input
Oscillation
ing dissipa- voltage Output voltage
Output frequency
range
current tion
Vo*2
type fo (kHz)
(V)
Vin
Isw
Pd*1
TYP.
(W)
(V)
(A)
Features
• PWM chopper regulator
• Built-in overcurrent/overheat protection circuits
• Output ON/OFF control function
• PWM chopper regulator
(high oscillation frequency)
• Built-in overcurrent/overheat protection circuits
• Output ON/OFF control function
• PWM chopper regulator
• Built-in overcurrent/overheat protection circuits
• Output ON/OFF control function
• PWM chopper regulator
(high oscillation frequency)
• Built-in overcurrent/overheat protection circuits
• Output ON/OFF control function
Package
Output
saturation
voltage
Vsat
(V) TYP.
Outline
shape
type*5
100
1.0
E
300
1.0
E
1.5*3
14
40
VREF*4 to 35
(step-down type)/ Step–VREF*4 to –30 down
(inverting type)
TO-220
70
3.5*3
E
1.4
150
E
*1 With infinite heat sink attached
*2 Output voltage variable range
*3 Peak current
*4VREF nearly equal to 1.26 V (TYP.)
*5 Refer to page 31
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Power Devices/
Analog ICs
■ Chopper
CHOPPER REGULATORS
19
Analog
■ LED
LED DRIVERS
Drivers
• Built-in Step-up Circuit
Model No.
IR2E58U
White LED driver
for backlight
IR2E71Y
LED driver for
backlight and call
alert display (auto
brightness
adjustment)
IR2E67M
White LED driver
for backlight
IR2E70N
White LED driver
for backlight
*1
*2
*3
*4
*5
*6
20
Function
Features
Input
No. of
Constant
Switching voltage
Number Booster
output
current
transistor range
of LEDs method
circuits
circuit
(V)
•C
apable of driving a maximum of 96 LEDs
with 12 LEDs (in series) per channel
• Built-in step-up DC-DC converter
•H
igh oscillation frequency (1.5 MHz) makes
8
96
PWM
use of a small coil possible
•C
apable of controlling brightness using
PWM control
• Step-up output control according to LED-Vf
• 2 ch (11 LEDs x 2 ch) LED driver for
backlight
• Auto brightness adjustment backlight LED
• 6 ch RBG LED driver for illumination
• Built-in switching regulator for LCD backlight Backlight Backlight
2
22
• Built-in LCD controller power supply
PWM
RGB
RGB
(+5.8 V / –5.8 V MAX.)
6
6
• LDO 1 ch
• Interface for digital-output proximity sensor
with ambient light sensor
• Built-in general purpose input/output port
(7 ch MAX.)
• Built-in 10 ch. constant-current control
amplifier (external output transistor)
• Enables driving LEDs up to external
transistor voltage limit
*2
*3
• Built-in timing controller for lighting
10
• Wider range of PWM brightness control
possible, from simultaneous total output
control to local dimming
• Step-up output control according to LED-Vf
• Built-in step-up DC-DC controller for 2 ch
individual control
• Capable of 2 ch individual PWM brightness
control
*2
PWM
• LED current value adjustable by external
2
signal (voltage input / PWM signal)
• Brightness control possible at high contrast
ratio 3000:1
• Step-up output control according to LED-Vf
Output*1 Oscillation
current frequency
(mA) (Hz)
MAX. TYP.
Package
500 k
to 24HQFN
1.5 M
○
○
4.5 to
40/ch
28
○
○
Backlight
10 k
3.0 to 25.5/ch
to
4.5
RGB
1M
12.7/ch
35WL-CSP
*4
External
4.5 to
5.5
*5
80LQFP1420
*6
External
4.5 to
5.5
8 to
28
*5
–
100 k
to 24SSOP
500 k
Constant current (MAX.)
Determined by external transistor voltage limit.
Built-in feedback voltage-generating circuit for external power supply.
Built-in constant-current control amplifier (external output transistor)
Determined by external resistor.
Constant current can be controlled by LED anode voltage control.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
AC-DC CONVERSION TYPE ICs FOR LED LIGHTING /
POWER AMPLIFIERS FOR WIRELESS LAN
Analog/RF
■ AC-DC
Model No.
Conversion Type ICs for LED Lighting
Operating
Dissipation Switching
Supply
temperature
current frequency
voltage range
range
(mA)
(kHz)*1
(V)
TYP.
(°C)
TYP.
Features
Overvoltage/overheat/overcurrent circuits,
high-speed activation, stand-by feature,
PWM brightness control
IR3M92N4
−30 to +100
10 to 18
1
160
Gate driver
capacity
Low
High
(Ω)
(mA)
System
Package
MAX. 15 MIN. 40
Flyback
Step-down
SOP-8
*1 When operating a flyback converter
Amplifiers for Wireless LAN
Model No.
IRM068U7
QM2A1UA003
Supply
voltage
Vcc (V)
TYP.
Application
Control
voltage
Vbb (V)
TYP.
For 2.4 GHz single-band wireless LAN
(IEEE802.11b/g/n)
Linear Dissipation
current
output
(mA)
power*1
(dBm)
TYP.
Gain
(dB)
TYP.
Detection
circuit
18
115
27
○
20
150
28
○
18
170
30
○
20
225
31
○
17
100
28
17
140
30
2.8
IRM053U7
QM2A1UA004
IRM067U6
For 5 GHz single-band wireless LAN
(IEEE802.11a/n)
For 2.4/5 GHz dual-band wireless LAN
(IEEE802.11a/b/g/n)
3.3
2.9
○
Matching
circuit
Built-in
(IN)
Built-in
(IN)
Built-in
(IN/OUT)
Built-in
(IN/OUT)
Package
(mm)
HQFN6 pin
(1.5 × 1.5 × 0.4 mm)
HQFN10 pin
(2 × 2 × 0.4 mm)
Power Devices/
Analog ICs
■ Power
Built-in HQFN16 pin
(IN/OUT) (3 × 3 × 0.4 mm)
*1 At time of OFDM 64QAM modulating wave input.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
21
RF
■ Front-End
Model No.
FRONT-END MODULE FOR WIRELESS LAN
Modules for Wireless LAN
Application
Features
• Built-in detection circuit,
Front-end IC for 2.4 GHz
high efficiency / high linearQM2A1UB028/
wireless LAN (802.11b/g/n/ac) output power amplifier
032A
(SP3T SW + PA + LNA)
• .11ac-compliant low EVM
design
• Low-noise amplifier with
Front-end IC for 5 GHz
bypass mode
QM2A1UB029/
wireless LAN (802.11a/n/ac)
• Built-in input/output matching
033A
(SPDT SW + PA + LNA)
circuit
• Compact and thin package
Transmitter section
Receiver section
Supply Control EVM
Dissipation
Gain:
Noise
voltage voltage (%)/
current
Gain
Normal/
figure
(V)
(V)
Output
(mA)/
(dB)
Bypass
TYP.
TYP. power Output power TYP. (dB)
(dB)
TYP.
(dBm)
(dBm)
TYP.
2/19*1
3.6
200/19
27
2
Package
13/-5.5
HQFN16 pin
(2.5 × 2.5 ×
0.4 mm)
3.3
2/18*2
180/18
28
2.5
13/-7
*1 MCS7 HT20 at 64QAM input
*2 MCS7 HT40 at 64QAM input
22
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
LSI
CSP
■ CSP
(Chip Size Package)
•CSP
The FBGA (commonly known as CSP) has an area array terminal structure with solder balls on the
bottom, to give it a near chip-size footprint. This high-density, compact and low-profile package
technology will greatly help in the design of compact mobile equipment, such as mobile phones and
digital cameras.
● Compact
FBGA (CSP)
and lightweight
Ability to create a near-chip size and lighter-weight package in comparison with conventional plastic packages.
● High
reliability
Comparable high reliability with that of conventional plastic packages.
● Mountability
Conventional mounting system is available for CSP. SOP and QFP can be mounted together with CSP.
Terminal pitch
0.8 mm
0.65 mm
0.5 mm
0.4 mm
Maximum terminal counts
352 (16 mm x 16 mm)
352 (16 mm x 16 mm)
372 (16 mm x 16 mm)
264 (10 mm x 10 mm)
Nominal dimensions
5 mm x 5 mm to 10 mm x 10 mm
6 mm x 6 mm to 16 mm x 16 mm
Gold wire
IC
Mold resin
Packages
Features
Package height
0.8 mm to 1.5 mm (MAX.)
Cross
section
example
Substrate
Cu pattern
Solder ball
Terminal pitch : 0.8 mm
0.65 mm
0.5 mm
0.4 mm
Diameter : 0.45 mm
0.4 mm
0.3 mm
0.25 mm
CSP
• Wafer-level
The wafer-level CSP (WL-CSP) is a kind of chip-size package which is manufactured by assembling directly onto the finished wafer.
● Compact
and thinner size
It makes it possible to create an almost IC-size and lighter-weight package.
● Mountability
Features
The conventional CSP mounting system can be also used in that of wafer-level CSP, which facilitates chip
mounting more than bare-chip mounting does. It can be mounted together with other existing packages and
passive components.
Chip size*
4 mm x 4 mm
3.5 mm x 3.5 mm
3 mm x 3 mm
Pad pitch
0.5 mm
0.4 mm
0.5 mm
0.4 mm
0.5 mm
0.4 mm
Maximum terminal counts
49 (7 x 7)
81 (9 x 9)
36 (6 x 6)
49 (7 x 7)
25 (5 x 5)
36 (6 x 6)
* Rectangular chip form is also available.
Cu pattern
IC
Cross
section
example
Package height
0.5 mm to 1 mm (MAX.)
Passivation layer
Solder ball
23
LSI
■ SiP
•
SiP
(System in Package)
System in Package is SHARP’s original high-density mounting technology that achieves high-density memory capacity and multiple
functions by stacking multiple ICs or multiple packages. The System in Package technology means chip-stacked package technology
that can achieve up to 5-chip mounting by stacking ICs in a single package. The System in Package technology contributes to higher
functionality of applications, such as mobile phones and digital cameras, as well as to reduction in size and weight.
Chip Stacked CSP
● Wide
variety of lineup
It is possible to provide a wide lineup of stacked CSPs, including 2-chip, 3-chip, 4-chip and 5-chip stacked
CSPs, to respond to customer needs.
● Compact
and thinner size
Encapsulating multiple ICs into an existing plastic package contributes to decreasing the mounting area. In
addition, SHARP’s wafer thinning technology makes it possible to achieve 1.4 mm (MAX.) package height.
● Multiple
Features
functions
Multiple ICs of different sizes and functions, such as logic LSIs and memories, can be incorporated in a
single package, making possible multiple functions.
● Same-size
IC stacking technology
SHARP's stacking technology enables stacking of multiple same-size ICs, contributing to higher memory
density.
(4-chip stacked CSP)
When using a SHARP four-chip stacked CSP, the mounting area and weight of a package can be
decreased by half in comparison with using two 2-chip stacked CSPs, or a 3-chip stacked CSP and a
conventional CSP.
(5-chip stacked CSP)
Gold wire
IC
Mold resin
Cross
section
example
Package height
1.4 mm (MAX.)*
1.6 mm (MAX.)*
Cu pattern
Substrate
Diameter : 0.45 mm
0.30 mm
24
Solder ball
Terminal pitch : 0.8 mm
0.5 mm
* At 0.8 mm terminal pitch
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
LSI
SiP
•Chip Stacked TSOP/QFP*/VQFN/HQFN
● Decreased
mounting area
By encapsulating two identical or different types of ICs into a single conventional plastic package, the
mounting area of the package can be decreased.
Features
● Multiple
functions
Thanks to the incorporation of different sizes and functions of multiple ICs, such as logic LSIs and
memories, the functionality increases.
● Higher
memory density
When incorporating two identical memory ICs into a single package, memory density doubles on the
same mounting area.
(TSOP, QFP*)
(Hamburger type)
(Turtle stack type)
Cross
section
example
Gold wire
IC
Gold wire
Packages
IC
(HQFN)
(VQFN)
Gold wire
Mold resin
Gold wire
Package height
1.0 mm (MAX.)
Mold resin
Package height
1.0 mm (MAX.)
* Including TQFP and LQFP.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
25
LSI
PACKAGE LINEUP
■ Package
Lineup
•Surface-Mount Type
Package
type
Appearance
(Package material)
Package code
No. of terminals
Package depth & width
Terminal pitch Nominal dimensions
(D x W) x
mm
mm
(seated height [MAX.]) mm
P-LFBGA048-0606
P-TFBGA048-0608
48
P-TFBGA048-0808
P-TFBGA056-0808
56
P-TFBGA060-0811
60 (48)*
P-TFBGA064-0811
64
P-TFBGA072-0811
P-LFBGA072-0811
81
P-LFBGA085-0811
85
P-LFBGA087-0811
87
P-LFBGA088-0912
FBGA
(CSP)
D
W
(Plastic)
6.0 x 6.0 x (1.4)
6x 8
6.0 x 8.0 x (1.2)
8x 8
8.0 x 8.0 x (1.2)
8 x 11
72 (64)*
P-TFBGA081-0808
P-LFBGA088-0811
6x 6
8.0 x 11.0 x (1.2)
8.0 x 11.0 x (1.4) / (1.6)
88
8x 8
8.0 x 8.0 x (1.2)
8 x 11
8.0 x 11.0 x (1.4) / (1.6)
9 x 12
9.0 x 12.0 x (1.4) / (1.6)
8 x 11
8.0 x 11.0 x (1.4) / (1.6)
P-LFBGA090-0811
90
P-TFBGA096-1010
96
P-LFBGA107-0912
107
P-TFBGA111-1010
111
P-TFBGA112-1010
112
P-LFBGA115-0914
115
9 x 14
9.0 x 14.0 x (1.4) / (1.6)
P-LFBGA116-1010
116
10 x 10
10.0 x 10.0 x (1.4) / (1.6)
P-LFBGA130-1013
130
10 x 13
10.0 x 13.0 x (1.4) / (1.6)
P-TFBGA144-1111
144
11 x 11
11.0 x 11.0 x (1.2)
P-TFBGA160-1212
160
12.0 x 12.0 x (1.2)
P-LFBGA168-1212
168
12.0 x 12.0 x (1.4) / (1.6)
P-TFBGA180-1212
180
P-TFBGA184-1212
184
P-TFBGA240-1414
240
P-LFBGA280-1616
280
P-LFBGA352-1616
352
0.8
10 x 10
10.0 x 10.0 x (1.2)
9 x 12
9.0 x 12.0 x (1.4) / (1.6)
10 x 10
10.0 x 10.0 x (1.2)
12 x 12
12.0 x 12.0 x (1.2)
14 x 14
14.0 x 14.0 x (1.2)
16 x 16
16.0 x 16.0 x (1.5)
6.0 x 6.0 x (1.2)
P-TFBGA064-0606
64
6x 6
P-LFBGA140-0909
140
9x 9
9.0 x 9.0 x (1.4)
P-LFBGA160-1010
160
10 x 10
10.0 x 10.0 x (1.4) / (1.6)
P-TFBGA180-1313
180
P-LFBGA192-1010
192
P-LFBGA208-1212
208
P-LFBGA224-1313
224
P-TFBGA260-1313
260
0.65
13 x 13
13.0 x 13.0 x (1.2)
10 x 10
10.0 x 10.0 x (1.4) / (1.6)
12 x 12
12.0 x 12.0 x (1.4) / (1.6)
13 x 13
13.0 x 13.0 x (1.4) / (1.6)
13.0 x 13.0 x (1.2)
* Figures in brackets indicate available terminal counts.
26
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
LSI
PACKAGE LINEUP
•Surface-Mount Type (cont’d)
Appearance
(Package material)
Package code
No. of terminals
P-VFBGA057-0505
57
P-VFBGA075-0505
75
P-TFBGA064-0606
64
P-TFBGA068-0606
68
P-VFBGA081-0606
81
P-TFBGA084-0606
84
Package depth & width
Terminal pitch Nominal dimensions
(D x W) x
mm
mm
(seated height [MAX.]) mm
5x 5
6.0 x 6.0 x (1.1)
6x 6
6.0 x 6.0 x (0.9)
7.0 x 7.0 x (0.9)
100
P-TFBGA100-0707
P-VFBGA108-0707
P-TFBGA108-0707
P-VFBGA120-0707
P-TFBGA120-0707
7.0 x 7.0 x (1.1)
7.0 x 7.0 x (0.9)
108
7x 7
132
P-TFBGA133-0808
133
7.0 x 7.0 x (1.1)
8.0 x 8.0 x (1.1)
8x 8
P-VFBGA144-0808
FBGA
(CSP)
144
D
W
P-VFBGA171-0811
P-LFBGA171-0811
P-VFBGA176-0909
P-TFBGA176-0909
P-TFBGA180-0909
P-TFBGA188-0909
P-VFBGA188-1111
P-VFBGA208-1010
P-TFBGA208-1010
P-TFBGA245-1010
P-LFBGA245-1010
(Plastic)
8.0 x 8.0 x (0.9)
8.0 x 8.0 x (1.3) / (1.5)
0.5
8 x 11
8.0 x 11.0 x (1.3)
152
8x 8
8.0 x 8.0 x (1.1)
171
8 x 11
P-LFBGA144-0811
P-TFBGA152-0808
7.0 x 7.0 x (1.1)
7.0 x 7.0 x (0.9)
120
P-TFBGA132-0707
P-LFBGA144-0808
6.0 x 6.0 x (0.9)
6.0 x 6.0 x (1.1)
P-VFBGA100-0606
P-VFBGA100-0707
5.0 x 5.0 x (0.9)
9x 9
180
188
11 x 11
10 x 10
245
P-WFBGA144-0606
144
P-WFBGA121-0606
121
P-WFBGA145-0606
145
P-TFBGA168-0707
168
P-TFBGA204-0808
204
P-WFBGA205-0808
205
P-WFBGA261-0808
261
9.0 x 9.0 x (1.1)
11.0 x 11.0 x (0.9)
10.0 x 10.0 x (0.9)
208
424
8.0 x 11.0 x (0.9)
8.0 x 11.0 x (1.3) / (1.5)
9.0 x 9.0 x (0.9)
176
P-FBGA424-1414
Packages
Package
type
10.0 x 10.0 x (1.1)
10.0 x 10.0 x (1.3)
14 x 14
14.0 x 14.0 x (1.8)
6.0 x 6.0 x (0.75)
6x 6
0.4
7x 7
6.0 x 6.0 x (0.8)
7.0 x 7.0 x (1.0)
8.0 x 8.0 x (1.0)
8x 8
8.0 x 8.0 x (0.8)
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
27
LSI
PACKAGE LINEUP
•Surface-Mount Type (cont’d)
Package
type
Appearance
(Package material)
No. of terminals
P-TFBGAXXX-0606
to 36
6x 6
6.0 x 6.0 x (1.2)
P-TFBGAXXX-0707
to 49
7x 7
7.0 x 7.0 x (1.2)
P-TFBGAXXX-0808
to 81
8x 8
8.0 x 8.0 x (1.2)
P-TFBGAXXX-0909
to 100
9x 9
9.0 x 9.0 x (1.2)
P-TFBGAXXX-1010
to 121
10 x 10
10.0 x 10.0 x (1.2)
P-TFBGAXXX-1111
to 144
11 x 11
11.0 x 11.0 x (1.2)
P-TFBGAXXX-1212
to 196
12 x 12
12.0 x 12.0 x (1.2)
P-TFBGAXXX-1313
to 216
13 x 13
13.0 x 13.0 x (1.2)
14 x 14
14.0 x 14.0 x (1.2)
15 x 15
15.0 x 15.0 x (1.2)
P-TFBGAXXX-1414
P-TFBGAXXX-1515
FBGA
(CSP)
D
W
(Plastic)
PBGA
(BGA)
D
W
(Plastic)
Package depth & width
Terminal pitch Nominal dimensions
(D x W) x
mm
mm
(seated height [MAX.]) mm
Package code
0.8
to 240
P-TFBGAXXX-1616
to 352
16 x 16
16.0 x 16.0 x (1.2)
P-TFBGAXXX-0606
to 49
6x 6
6.0 x 6.0 x (1.2)
P-TFBGAXXX-0707
to 81
7x 7
7.0 x 7.0 x (1.2)
P-TFBGAXXX-0808
to 121
8x 8
8.0 x 8.0 x (1.2)
P-TFBGAXXX-0909
to 144
9x 9
9.0 x 9.0 x (1.2)
P-TFBGAXXX-1010
to 196
10 x 10
10.0 x 10.0 x (1.2)
P-TFBGAXXX-1111
to 224
11 x 11
11.0 x 11.0 x (1.2)
P-TFBGAXXX-1212
to 256
12 x 12
12.0 x 12.0 x (1.2)
P-TFBGAXXX-1313
to 272
13 x 13
13.0 x 13.0 x (1.2)
P-TFBGAXXX-1414
to 304
14 x 14
14.0 x 14.0 x (1.2)
P-TFBGAXXX-1515
to 320
15 x 15
15.0 x 15.0 x (1.2)
P-TFBGAXXX-1616
to 352
16 x 16
16.0 x 16.0 x (1.2)
P-TFBGAXXX-0606
to 100
6x 6
6.0 x 6.0 x (1.1)
P-TFBGAXXX-0707
to 132
7x 7
7.0 x 7.0 x (1.1)
P-TFBGAXXX-0808
to 164
8x 8
8.0 x 8.0 x (1.1)
P-TFBGAXXX-0909
to 192
9x 9
9.0 x 9.0 x (1.1)
P-TFBGAXXX-1010
to 216
10 x 10
10.0 x 10.0 x (1.1)
P-TFBGAXXX-1111
to 244
11 x 11
11.0 x 11.0 x (1.1)
P-TFBGAXXX-1212
to 268
12 x 12
12.0 x 12.0 x (1.1)
P-TFBGAXXX-1313
to 296
13 x 13
13.0 x 13.0 x (1.1)
P-TFBGAXXX-1414
to 320
14 x 14
14.0 x 14.0 x (1.1)
P-TFBGAXXX-1515
to 348
15 x 15
15.0 x 15.0 x (1.1)
P-TFBGAXXX-1616
to 372
16 x 16
16.0 x 16.0 x (1.1)
P-TFBGAXXX-0505
to 100
5x 5
5.0 x 5.0 x (1.0)
P-TFBGAXXX-0606
to 144
6x 6
6.0 x 6.0 x (1.0)
P-TFBGAXXX-0707
to 168
7x 7
7.0 x 7.0 x (1.0)
P-TFBGAXXX-0808
to 204
8x 8
8.0 x 8.0 x (1.0)
P-TFBGAXXX-0909
to 228
9x 9
9.0 x 9.0 x (1.0)
P-TFBGAXXX-1010
to 264
10 x 10
10.0 x 10.0 x (1.0)
1.0
21 x 21
21.0 x 21.0 x (2.2)
1.27
35 x 35
35.0 x 35.0 x (2.63)
P-BGA0356-2121
356
P-BGA0476-3535
476
P-BGA0528-3535
528
0.65
0.5
0.4
XXX: Terminal counts
BGA is a trademark of Motorola Nippon Ltd.
28
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
LSI
PACKAGE LINEUP
Package
type
Appearance
(Package material)
W
Package code
P-TSOP048-1220
No. of
terminals
48
TSOP
Package depth & width
Lead frame material
(D x W) x
Alloy42
Copper alloy
(seated height [MAX.]) mm
12 x 20
12.0 x 18.4 x (1.2)
14.0 x 18.4 x (1.2)
0.5
(Plastic)
D
QFP
W
LQFP
D
TQFP
(Plastic)
VQFN
Terminal pitch Nominal dimensions
mm (mil)
mm (mil)
W
D
HQFN*
(Plastic)
P-TSOP056-1420
56
14 x 20
P-QFP048-0707
48
7x 7
P-QFP072-1010
72
P-LQFP080-1212
80
P-LQFP100-1414
100
P-TQFP048-0707
48
P-TQFP100-1414
100
P-TQFP128-1414
128
P-VQFN020-0404
20
P-VQFN024-0404
24
P-VQFN028-0505
28
P-VQFN032-0505
32
P-VQFN036-0606
0.5
0.5
0.5
0.4
7.0 x 7.0 x (1.65)
○
○
○
○
○
○
10 x 10
10.0 x 10.0 x (1.8)
○
–
12 x 12
12.0 x 12.0 x (1.7)
○
–
14 x 14
14.0 x 14.0 x (1.7)
○
–
7x 7
7.0 x 7.0 x (1.2)
○
–
○
–
14 x 14
4x 4
14.0 x 14.0 x (1.2)
4.2 x 4.2 x (1.0)
○
–
–
○
–
○
–
○
–
○
5x 5
5.2 x 5.2 x (1.0)
36
6x 6
6.2 x 6.2 x (1.0)
–
○
P-VQFN048-0707
48
7x 7
7.2 x 7.2 x (1.0)
–
○
P-VQFN036-0505
36
5x 5
5.2 x 5.2 x (1.0)
–
○
P-VQFN052-0707
52
7x 7
7.2 x 7.2 x (1.0)
–
○
P-HQFN020-0404
20
4.0 x 4.0 x (1.0)
–
○
4.0 x 4.0 x (0.85)
–
○
4.2 x 4.2 x (1.0)
–
○
5x 5
5.0 x 5.0 x (1.0)
–
○
7x 7
7.2 x 7.2 x (1.0)
–
○
P-HQFN024-0404
24
P-HQFN028-0505
28
P-HQFN052-0707
52
* HQFN is a higher heat dissipation package of VQFN.
0.5
0.4
0.5
0.4
4x 4
Packages
•Surface-Mount Type (cont’d)
100 mil = 2.54 mm
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
29
Imaging
PACKAGE LINEUP
• For CCDs
Package
type
Appearance
(Package material)
W
DIP
D
Package code
No. of
terminals
Terminal pitch
mm
Nominal dimensions
mm (mil)
Package depth & width
(D x W) x
(seated height [TYP.]) mm
P-DIP014-0400A
14
1.27
10.16 (400)
10.0 x 10.0
P-DIP016-0450
16
1.27
11.43 (450)
11.4 x 12.2
P-DIP020-0500
20
1.27
12.2 (500)
12.0 x 13.8
P-DIP024-0400
24
0.80
10.16 (400)
10.0 x 10.0
P-DIP028-0566
28
1.11
14.4 (566)
14.2 x 16.0
64
1.00
25.48 (1 000)
36.1 x 25.4
P-SOP014-0400A
14
1.27
12 (470)
10.0 x 10.0 x (4.1)
P-SOP028-0400
28
0.69
10.16 (400)
10.0 x 10.0 x (3.5)
P-SOP032-0525
32
0.78
13.3 (525)
12.0 x 13.8 x (3.92)
0.65
8.9 (350)
8.3 x 8.9 x (1.52)
0.80
11.0 (433)
11.0 x 11.0 x (1.62)
P-DIP064-1000
(Plastic)
W
SOP
D
(Plastic)
W
P-DIP064-1000B
N-LCC040-R350 (B)
LCC
40
D
N-LCC040-S433A
(Ceramic)
100 mil = 2.54 mm
• For CMOSs
Package
type
Appearance
(Package material)
W
LCC
Package code
No. of
terminals
Terminal pitch
mm
Nominal dimensions
mm (mil)
Package depth & width
(D x W) x
(seated height [TYP.]) mm
120
0.65
22.8 (898)
20.0 x 22.8 x (2.67)
N-LCC120-R898
D
(Ceramic)
N-LCC120-R898A
100 mil = 2.54 mm
Nominal dimensions
FBGA (CSP)
PBGA (BGA)
VQFN
HQFN
SOP
SSOP
MFP
TSOP
DIP
LCC
QFP
LQFP
TQFP
FBGA : fine-pitch ball grid array package
MFP
PBGA : plastic ball grid array package
TSOP : thin small outline package
VQFN : very thin quad flat non-leaded package
SOP
QFP
HQFN : heat sink quad flat non-leaded package
: small outline package
SSOP : shrink small outline package
: mini flat package
: quad flat package
LQFP : low profile quad flat package
TQFP : thin quad flat package
DIP
: dual inline package
LCC
: leadless chip carrier
Ball Grid Array and BGA are trademarks of Motorola Nippon Ltd.
30
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
REG
PACKAGE LINEUP
• Lead-Inserting Type Packages [For regulators: PQ series]
Appearance
(Package material)
Package type
No. of
terminals
Terminal pitch
mm
Outline dimensions
(Width x Thickness x Height) mm
Lead frame
material
4
2.54
10.2 (MAX.) x 4.5 x 29.1*2
Cu
4
2.54
10.2 (MAX.) x 4.5 x 29.1*2
Cu
5
(1.7)*1
10.2 (MAX.) x 4.5 x 24.6*2
Cu
5
(1.7)*1
10.2 (MAX.) x 4.5 x 24.6*2
Cu
5
(1.7)*1
10.2 (MAX.) x 4.5 x 24.6*2
Cu
A
TO-220
(Plastic)
B
TO-220
(Full mold)
(Plastic)
(Plastic)
D
TO-220
[Lead forming type]
(Plastic)
Packages
TO-220
(Full mold)
[Lead forming type]
C
E
TO-220
[Lead forming type]
(Plastic)
*1 The figure in parentheses indicates reference value.
*2 Including lead length
•Surface-Mount Type Packages [For regulators/LED drivers: PQ series]
Appearance
(Package material)
Package type
No. of
terminals
Terminal pitch
mm
Outline dimensions
(Width x Height x Thickness) mm
Lead frame
material
5
(Heat sink included)
(1.27)*1
6.6 (MAX.) x 9.7 (MAX.)*2 x 2.1
Cu
8
1.27
5 x 6.2*2 x 1.55*2
Cu
6
1.5
4.5 x 4.3*2 x 1.5
Cu
F
SC-63
(Plastic)
SOP-8
(Plastic)
SOT-89
(Plastic)
*1 The figure in parentheses indicates reference value.
*2 Including lead length
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
31
REG
PACKAGE LINEUP
•Surface-Mount Type Packages [For regulators/LED drivers: PQ series] (cont’d)
Package type
Appearance
(Package material)
SOT-23-6
No. of
terminals
Terminal pitch
mm
Outline dimensions
(Width x Height x Thickness) mm
Lead frame
material
6
0.95
2.9 x 2.8*2 x 1.3
Cu
6
0.95
2.9 x 2.8*2 x 1.3
Cu
6
(0.95)*1
(3.4)*1 x 3.3*2 x 1.4 (MAX.)
Cu
5
(0.95)*1
(2.9)*1 x 2.8*2 x 1.3 (MAX.)
Cu
9
(Including radiating fin)
1.0
5.0 x 4.5 x 0.75 (MAX.)
Cu
(Plastic)
SOT-23-6W
(Plastic)
SOT-23-L
(Plastic)
SOT-23-5
(Plastic)
USB-8
*1 The figure in parentheses indicates reference value.
*2 Including lead length
32
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
OPTO
■ Photocoupler
PHOTOCOUPLER LINEUP
Lineup
<Phototransistor output type>
Output type
Single phototransistor
Features
Model No. (series)
General purpose,
High collector-emitter voltage
Low input current
AC input response
Darlington phototransistor
High sensitivity,
High collector-emitter voltage
Low input current
Low input current
Compact, Half pitch
(lead space), SMT type
Single phototransistor
General purpose,
High resistance to noise, etc.
Single phototransistor
34
PC364NJ0000F
34
PC355NJ0000F / PC452J00000F
34
PC365NJ0000F
34
35
Low input current
PC3H71xNIP0F
35
PC3H3J00000F / PC3H4J00000F
35
PC3H41xNIP0F
35
PC3H5J00000F
35
PC3H510NIP0F
35
Reinforced insulation
PC123XNNSZ0F
36
Low input current
General purpose,
High collector-emitter voltage, etc.
PC1231xNSZ0X
36
PC817XNNSZ0F / PC851XNNSZ0F
36
High sensitivity
Low input current
DIP type (6-pin)
34
PC354NJ0000F
35
Low input current
(4-pin, DIP type)
34
PC367NJ0000F
PC3H7J00000F
Low input current
DIP type (4-pin)
PC357NJ0000F / PC451J00000F
Reinforced insulation PC3HU7xYIP0B
AC input response
Darlington phototransistor
Page
PC8171xNSZ0X
36
Darlington phototransistor
High sensitivity,
High collector-emitter voltage
PC815XNNSZ0F / PC852XNNSZ0F
36
Single phototransistor
General purpose,
High collector-emitter voltage, etc.
PC7xxV0NSZXF▲
37
Darlington phototransistor
High sensitivity,
High collector-emitter voltage, etc.
PC7x5V0NSZXF▲
37
<OPIC output type>
Package type
Compact, SMT type
DIP type, SMT type
Output type
Features
Model No. (series)
Optoelectronics
Package type
Mini-flat 4-pin
Compact, SMT type
Page
Digital output
General purpose, High response speed
PC400J00000F
38
Analog/Digital output
High CMR
PC457L0NIP0F
38
Digital output
General purpose
PC900V0NSZXF
39
Built-in base amplifier
For inverter control
PC925LENSZ0F
39
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
33
OPTO
PHOTOCOUPLERS
■ Photocouplers
♦Phototransistor
Darlington phototransistor output
Single phototransistor output
Output type
Output Type
<Compact, SMT type>
Model No.
Internal
connection
diagram
○: Approved
Approved
by safety
standards*2
Features
UL
(Ta = 25°C)
Absolute maximum ratings
Electro-optical characteristics
Isolation
Current transfer ratio
Response time
CollectorForward voltage
emitter
Package current (AC)
tr
voltage CTR
RL VCE
IC
IF VCE
Viso
IF
(µs)
(%)
VCEO
(mA)
(V)
(mA) (Ω) (V)
(mA)
(rms)
TYP.
MIN.
(V)
(kV)
PC357NJ0000F
General purpose
○
50
3.75
80
50
5
5
4
2
100
2
PC451J00000F
High collector-emitter
voltage
○
50
3.75
350
40
5
5
4
2
100
2
PC367NJ0000F
Low input current,
high resistance to noise*1
○
10
3.75
80
100
0.5
5
4
2
100
2
PC354NJ0000F
AC input response
○
±50
3.75
80
20
±1
5
4
2
100
2
±10
3.75
80
50
±0.5
5
4
2
100
2
Mini-flat
4-pin
PC364NJ0000F
Low input current,
AC input response,
high resistance to noise*1
○
PC355NJ0000F
High sensitivity
○
50
3.75
35
600
1
2
60
2
100
2
PC365NJ0000F
High sensitivity,
low input current
○
10
3.75
35
600
0.5
2
60
10
100
2
PC452J00000F
High collector-emitter
voltage
○
50
3.75
350
1 000
1
2
100
20
100
2
*1 CMR: MIN. 10 kV/µs
*2 Please refer to Specification Sheets for model numbers approved by safety standards.
PC357NJ0000F
(Mini-flat 4-pin)
34
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
OPTO
PHOTOCOUPLERS
♦ Phototransistor
*1
*2
*3
*4
*5
*6
Model No.
Internal
connection
diagram
Features
○: Approved
Approved
by safety
standards*3
UL
PC3HU7xYIP0B
Reinforced insulation
(internal insulation distance:
MIN. 0.4 mm),
low-profile package
PC3H7J00000F
Standard
PC3H71xNIP0F
○ *4, 5
(Ta = 25°C)
Absolute maximum ratings
Electro-optical characteristics
Isolation
Current transfer
CollectorResponse time
Forward voltage
ratio
emitter
Package current (AC)
voltage CTR
tr
IF
Viso
IF VCE
IC RL VCE
VCEO
(%)
(µs)
(mA)
(rms)
(mA)
(V)
(mA) (Ω) (V)
(V)
MIN.
TYP.
(kV)
Lowprofile
50
3.75
80
50
5
5
4
2 100 2
mini-flat
4-pin
○ *6
50
2.5
80
20
1
5
4
2
100
2
High resistance to noise*1,
low input current
○
10
2.5
80
100
0.5
5
4
2
100
2
PC3H3J00000F
AC input response,
high resistance to noise*1
○
±50
2.5
80
20
±1
5
4
2
100
2
PC3H4J00000F
AC input response
○ *2, 6
±50
2.5
80
20
±1
5
4
2
100
2
PC3H41xNIP0F
AC input response,
high resistance to noise*1,
low input current
○
±10
2.5
80
50
±0.5
5
4
2
100
2
PC3H5J00000F
High sensitivity
○
50
2.5
35
600
1
2
60
2
100
2
10
2.5
35
600
0.5
2
60
2
100
2
PC3H510NIP0F
High sensitivity,
low input current
Mini-flat
4-pin
Mini-flat
4-pin
○
CMR: MIN.10 kV/µs
A VDE approved type is optionally available.
Please refer to Specification Sheets for model numbers approved by safety standards.
VDE, CSA approved
In conformance with BSI, SEMKO, DEMKO, NEMKO, and FIMKO
UL, cUL approved
PC3HU7xYIP0B
Optoelectronics
Darlington phototransistor output
Single phototransistor output
Output type
Output Type
<Compact, half pitch (lead space) SMT type>
PC3H7J00000F
(Mini-flat 4-pin)
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
35
OPTO
PHOTOCOUPLERS
♦ Phototransistor
Darlington phototransistor output
Single phototransistor output
Output type
Output Type
<DIP type (4-pin)>
Model No.
Internal
connection
diagram
○: Approved
(Ta = 25°C)
Absolute maximum ratings
Isolation CollectorForward
Package current voltage emitter
(AC)
voltage
Others
IF
UL VDE
Viso (rms) VCEO
*2
*3
(mA)
(V)
(kV)
Approved by
safety standards*8
Features
Electro-optical characteristics
Current transfer ratio Response time
CTR
(%)
MIN.
IF
(mA)
tr
RL
(µs) (Ω)
TYP.
PC123XNNSZ0F*1, *5, *6, *7
High isolation voltage,
reinforced insulation
○
○
○
50
5.0
70
50
5
4
100
PC1231xNSZ0X*1
High isolation voltage, reinforced
insulation, low input current,
high resistance to noise*4
○
○
○
10
5.0
70
50
0.5
4
100
PC817XNNSZ0F*5, *6, *7
High isolation voltage
○
–
○ *9
50
5.0
80
50
5
4
100
PC8171xNSZ0X*5, *6
High isolation voltage, low input
current, high resistance to noise*4 ○
–
–
10
5.0
80
100
0.5
4
100
PC851XNNSZ0F*5, *6
High isolation voltage,
high collector-emitter voltage
○
–
–
50
5.0
350
40
5
4
100
PC815XNNSZ0F*5, *6
High isolation voltage,
high sensitivity
○
–
–
50
5.0
35
600
1
60
100
PC852XNNSZ0F*5, *6
High isolation voltage,
high collector-emitter voltage
○
○
–
50
5.0
350
1 000
1
100 100
4-pin
DIP
*1
*2
*3
*4
*5
*6
*7
Wide lead spacing type is also available. Creepage distance: 6.4 mm or more, wide lead spacing type: 8 mm or more.
Optionally available.
BSI, SEMKO, DEMKO, NEMKO, FIMKO, CSA
CMR: 10 kV/µs MIN.
Lead forming type is also available for surface mounting.
Taped package of lead forming type for surface mounting is also available.
Wide lead spacing type is also available. Compatible with wide lead spacing type lead-forming models for surface-mount use. Also compatible with taped packages for wide
lead spacing type lead-forming models for surface-mount use.
*8 Please refer to Specification Sheets for model numbers approved by safety standards.
*9 UL, CSA approved
PC817XNNSZ0F
(4-pin DIP)
36
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
OPTO
PHOTOCOUPLERS
♦ Phototransistor
Output type
PC713V0NSZXF▲
Internal
connection
diagram
○: Approved
Features
High isolation voltage,
with base terminal
Approved
by safety
standards*2
UL
VDE*1
○
○
(Ta = 25°C)
Absolute maximum ratings
Electro-optical characteristics
Isolation Collector- Current transfer Response
Forward
ratio
time
Package current voltage emitter
(AC)
voltage CTR
tr
IF
RL
IF
Viso (rms) VCEO
(%)
(mA) (µs)
(Ω)
(mA)
(V)
(kV)
MIN.
TYP.
50
5.0
80
50
5
4
100
6-pin
DIP
PC715V0NSZXF▲
High isolation voltage,
high sensitivity
○
○
50
5.0
35
600
1
60
100
PC725V0NSZXF▲
High isolation voltage,
high sensitivity,
high collector-emitter voltage,
high power
○
○
50
5.0
300
1 000
1
100
100
*1 Optionally available.
*2 Please refer to Specification Sheets for model numbers approved by safety standards.
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Optoelectronics
Darlington phototransistor output
Model No.
Single phototransistor output
Output Type
<DIP type (6-pin)>
37
OPTO
PHOTOCOUPLERS
“OPIC” (Optical IC) is a trademark of SHARP Corporation. An OPIC consists of a
Output ( light-detecting element and signal-processing circuit integrated onto a single chip. )
○: Approved
<Compact, SMT type> (1-1)
♦OPIC
Model No.
PC400J00000F
Internal
connection
diagram
A
(Ta = 25°C)
Absolute maximum
Electro-optical characteristics*1
ratings
Isolation
Low level output voltage
Threshold input current
Package Forward voltage
current
V
OL
IFHL
IFLH
(AC)
IF
RL
Ta
IOL
IF
(mA) (mA)
UL VDE*3
Viso (rms) (V)
(mA)
(Ω)
(mA)
(°C)
(mA)
MAX.
MAX.
MAX.
(kV)
Approved by
safety
standards*2
Features
Digital output,
normal-off operation
○
–
Mini-flat
5-pin
50
3.75
0.4
0 to +70
16
4
2.0
–
280
A: Rated voltage circuit
*1 Each item is measured at Vcc=5V. (PC400)
*2 Please refer to Specification Sheets for model numbers approved by safety standards.
*3 Optionally available.
<Compact, SMT type> (1-2)
Model No.
PC457L0NIP0F
Internal
connection
diagram
○: Approved
Approved by
safety
standards*1
Features
High speed (1 Mb/s),
high CMR (15 kV/µs),
for flow soldering
UL
VDE*2
○
○
(Ta = 25°C)
Absolute maximum
Electro-optical characteristics
ratings
Isolation
Current transfer ratio
Propagation delay time
Package Forward voltage
current
CTR
tPHL tPLH
(AC)
VO VCC
IF
IF
RL
IF
Viso (rms) (%) (mA) (V) (V) (µs) (µs)
(Ω) (mA)
(mA)
MIN.
TYP. TYP.
(kV)
Mini-flat
5-pin
25
3.75
19
16
0.4
4.5
0.2
0.4
1 900
16
*1 Please refer to Specification Sheets for model numbers approved by safety standards.
*2 Optionally available.
PC400J00000F
(Mini-flat 5-pin)
38
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
OPTO
PHOTOCOUPLERS
“OPIC” (Optical IC) is a trademark of SHARP Corporation. An OPIC consists of a
Output ( light-detecting element and signal-processing circuit integrated onto a single chip. )
○: Approved
<DIP type, digital output>
♦OPIC
Model No.
Internal
connection
diagram
Features
PC900V0NSZXF*2, *3
Digital output,
normal-off operation
A
Absolute
maximum ratings
Approved by
safety
standards*5
UL
○
(Ta = 25°C)
Electro-optical characteristics*1
Threshold input
Isolation
Low level output voltage
Package Forward voltage
current
current
(AC)
VOL
IFHL IFLH
F
I
IF
RL
Ta
IOL
VDE
Viso (rms) (V)
(mA) (mA)
*4
(mA)
(mA) (mA)
(Ω)
(°C)
(kV)
MAX.
MAX. MAX.
○
6-pin
DIP
50
5.0
0.4
0 to +70
16
4
2.0
–
280
A: Rated voltage circuit
*1 Each item is measured at Vcc=5V.
*2 Lead forming type is also available for surface mounting.
*3 Taped package of lead forming type for surface mounting is also available.
*4 Optionally available.
*5 Please refer to Specification Sheets for model numbers approved by safety standards.
PC900V0NSZXF
(6-pin DIP)
“OPIC” (Optical IC) is a trademark of SHARP Corporation. An OPIC consists of a
Output ( light-detecting element and signal-processing circuit integrated onto a single chip. )
○: Approved
<DIP type, Gate drive type>
Model No.
Internal
connection
diagram
PD
Interface
OPIC
PC925LENSZ0F*1
Tr1
Tr2
Features
• Built-in drive circuit
directly connectable to
MOS-FET and IGBT
• Peak output current: 2.5 A
• Low dissipation current
(Icc = TYP. 2.5 mA)
• High resistance to noise
(CMR: MIN. 15 kV/µs)
Approved by
safety
standards*3
UL
VDE
○
○
Package
*2
8-pin
DIP
(Ta = 25°C)
Absolute
Electro-optical characteristics
maximum ratings
Isolation
Propagation delay time
Forward
voltage
current
tPHL tPLH
(AC)
IF
RL1
RL2
VCC
IF
Viso (rms) (µs) (µs)
(V) (mA) (Ω)
(Ω)
(mA)
TYP. TYP.
(kV)
25
5.0
MAX. MAX. 15 to
0.5
0.5
30
7 to
16
RG =
10
Optoelectronics
♦OPIC
–
*1 Lead forming type is also available for surface mounting. Taped package of lead forming type for surface mounting is also available.
*2 A VDE approved type is optionally available.
*3 Please refer to Specification Sheets for model numbers approved by safety standards.
PC925LENSZ0F
(8-pin DIP)
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
39
OPTO
■ Phototriac
Package
Mini-flat (SMD)
PHOTOTRIAC COUPLER LINEUP
Coupler Lineup
Applied voltage
AC 200 V lines
(VDRM = 600V)
ON-state
current (rms)
0.05 A
Features
Model No.
S2S3A00F*3 / S2S5A00F*3 / S2S5FA0F*3
General purpose
Built-in zero-cross circuit S2S4A00F*3
DIP type
(4-pin)
DIP type
(6-pin package,
5th-pin cut)
AC 200 V lines
(VDRM = 600V)
0.1 A
41
42
General purpose
PC3ST11NSZKF
41
Reinforced isolation
PC3SH11YFZAX*3 / PC3SH13YFZAX*3
41
Built-in zero-cross circuit PC3SH21YFZBX*2
42
AC 100 V lines
(VDRM = 400V)
0.1 A
General purpose
PC2SD11NTZAF*3
41
AC 200 V lines
(VDRM = 600V)
0.1 A
General purpose
PC3SD12NTZAF*3 / PC3SD11YTZCF*1 /
PC3SD11NTZCF*1 / PC3SD13YXZBF*2
41
PC3SD21NTZAF*3 / PC3SD21NTZBF*2 /
Built-in zero-cross circuit PC3SD21NTZDF*4
42
PC3SF11YVZAF*3 / PC3SF11YVZBF*2
41
Built-in zero-cross circuit PC3SF21YVZAF*3 / PC3SF21YVZBF*2
42
Reinforced isolation
AC 200 V lines
(VDRM = 800V)
0.1 A
PC4SD11NTZCF*1
General purpose
Built-in zero-cross circuit PC4SD21NTZCF*1 / PC4SD21NTZDF*4
Reinforced isolation
PC4SF11YTZBF*2
Built-in zero-cross circuit PC4SF21YVZBF*2 / PC4SF21YWPSF*2
Minimum trigger current: *1 IFT ≦ 5 mA, *2 IFT ≦ 7 mA, *3 IFT ≦ 10 mA, *4 IFT ≦ 3 mA
40
Page
41
42
41
42
OPTO
■ Phototriac
PHOTOTRIAC COUPLERS
Couplers
○: Approved
(Ta = 25°C)
Approved by
safety standards*4
Internal
connection
diagram
Features
UL,
CSA
S2S3A00F
200 V lines, compact
○
○ *6
–
S2S5A00F
200 V lines, compact
○
○ *6
–
S2S5FA0F
High impulse noise product
○
○ *6
–
200 V lines, compact
○
○ *6
–
200 V lines, compact,
reinforced isolation
200 V lines, compact,
reinforced isolation,
high noise resistance
○
○
○ *2
○
○
○ *2
PC2SD11NTZAF
100 V lines
○
–
–
PC3SD12NTZAF
200 V lines
○
○ *6
–
PC3SD13YXZBF
High impulse noise product
○
○ *6
–
PC3SD11YTZCF
200 V lines
○
○ *6
–
PC3ST11NSZKF
PC3SH11YFZAX
PC3SH13YFZAX
PC3SD11NTZCF
200 V lines
○
○ *6
–
PC4SD11NTZCF
200 V lines,
repetitive peak-OFF-state voltage
○
○ *6
–
PC3SF11YVZAF
200 V lines, reinforced isolation
○
○
○ *2
PC3SF11YVZBF
200 V lines, reinforced isolation
○
○
○ *2
PC4SF11YTZBF
200 V lines, reinforced isolation,
repetitive peak-OFF-state voltage
○
○
○ *2
10
Mini-flat
4-pin
0.05
3.75
10
10
600
4-pin
DIP
0.1
10
5.0
10
10
400
10
10
7
600
5
6-pin
DIP*1, 3
0.1
600
800
5.0
5
5
10
600
7
800
7
Optoelectronics
Model No.
Electro-optical
Absolute maximum ratings
characteristics
Repetitive
Min. trigger
Isolation
peak
current
Package ON-state
voltage
current OFF-state
IFT
VDE Others
(AC)
(mA) MAX.
voltage
IT (rms)
Viso (rms)
(A)
VD = 6 V,
VDRM
(kV)
(V)
RL = 100Ω
For the notes *1 to *6, see next page.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
41
OPTO
■
PHOTOTRIAC COUPLERS
Phototriac Couplers
(Built-in zero-cross circuit type)
○: Approved
(Ta = 25°C)
Approved by
safety standards*4
Model No.
S2S4A00F
Internal
connection diagram
Zero-cross circuit
PC3SH21YFZBX
PC3SD21NTZAF
PC3SD21NTZBF
PC3SD21NTZDF
PC4SD21NTZCF
PC4SD21NTZDF
PC3SF21YVZAF
200 V lines, compact
○
200 V lines, compact,
reinforced isolation
○
○
○ *2
200 V lines,
low zero-cross voltage: MAX. 20 V
200 V lines,
low zero-cross voltage: MAX. 20 V
200 V lines,
low zero-cross voltage: MAX. 20 V
200 V lines,
repetitive peak-OFF-state voltage
200 V lines,
repetitive peak-OFF-state voltage
○
○ *6
–
○
○ *6
–
○
○ *6
–
○
○ *6
–
○
○ *6
–
200 V lines, reinforced isolation
○
○
○ *2
200 V lines, reinforced isolation
○
○
○ *2
PC4SF21YVZBF
200 V lines, reinforced isolation,
repetitive peak-OFF-state voltage
○
○
○ *2
High impulse noise product
○
○
○ *2
4-pin
DIP
0.1
600
5.0
7
10
600
7
3
6-pin
DIP*1, 3
5
800
0.1
5.0
3
10
600
7
7
6-pin
DIP*3
800
7
Lead forming type for surface mounting is also available.
In conformance with BSI, SEMKO, DEMKO, and FIMKO
These are molded pin No. 5.
Please refer to Specification Sheets for model numbers approved by safety standards.
VD = 6 V, RL = 100Ω
Optionally available
S2S3A00F
(Mini-flat 4-pin)
42
UL,
CSA
PC3SF21YVZBF
PC4SF21YWPSF
*1
*2
*3
*4
*5
*6
Zero-cross circuit
Features
Electro-optical
Absolute maximum ratings
characteristics
Min. trigger
Repetitive Isolation
current
Package ON-state
voltage
peak
current
IFT
(AC)
VDE Others
OFF-state
(mA) MAX.
IT (rms)
VDRM Viso (rms)
(A)
VD = 4 V,
(V)
(kV)
RL = 100Ω
Mini-flat
–
0.05
600
3.75
10*5
○ *6
4-pin
PC3ST series
(4-pin DIP)
PC3SH series
(4-pin DIP)
PC2SD11NTZAF
⎧PC3SD series,⎫
⎜PC4SD series ⎜
⎭
⎩
(6-pin DIP)
PC3SF series
(PC4SF series)
(6-pin DIP)
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
OPTO
Solid State Relay Lineup
Package
DIP 6-pin
DIP 8-pin
Applied voltage
ON-state current
(rms)
Features
Model No.
Page
AC 100 V lines
0.15 A
General purpose
PR22MA11NTZF
44
AC 200 V lines
0.06 A
General purpose
PR31MA11NTZF
44
0.15 A
General purpose
PR32MA11NTZF
44
0.3/0.6/0.9/1.2 A
General purpose
PR33MF5 series / PR39MF5 series /
PR36MF5 series / PR3BMF5 series /
PR36MF12NSZF
44
0.6/0.9/1.2 A
Built-in zero-cross circuit
PR36MF2 series / PR39MF2 series
44
AC 200 V lines
Optoelectronics
■
SOLID STATE RELAY LINEUP
43
OPTO
■ Solid
SOLID STATE RELAYS
State Relays
<DIP type>
○: Approved
Approved by
safety standards*1
Model No.
Internal
connection
diagram
Features
UL
CSA VDE*2
PR22MA11NTZF
100 V lines,
150 mA model in a small package
○
○
○
PR31MA11NTZF
200 V lines, compact
○
○
○
PR32MA11NTZF
200 V lines,
150 mA model in a small package
○
○
○
PR33MF51NSLF
200 V lines, compact
○
○
○
200 V lines, compact
○
○
○
PR36MF51NSLF
200 V lines, compact
○
○
○
PR36MF12NSZF
200 V lines, compact,
low input current
○
○
○
PR39MF51NSLF
200 V lines, compact
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
PR33MF52NSLF
PR3BMF51NSLF
200 V lines, compact
PR3BMF52NSZF
PR36MF21NSZF
PR36MF22NSZF
PR39MF22NSZF
Zerocross
circuit
200 V lines, compact,
low input current
200 V lines, compact (built-in zerocross circuit)
200 V lines, compact (built-in zerocross circuit), low input current
200 V lines, compact (built-in zerocross circuit), low input current
(Ta = 25°C)
Electrical
Absolute maximum ratings
characteristics
Min. trigger
Repetitive Isolation
current
Package ON-state
voltage
peak
current
IFT
(AC)
OFF-state
(mA) MAX.
IT (rms)
voltage Viso (rms)
(A)
VD = 6 V,
(kV)
VDRM (V)
RL = 100Ω
0.15
6-pin
DIP
400
10
5.0
0.06
10
600
0.15
10
10
0.3
10
10
0.6
5
600
8-pin
DIP
0.9
10
4.0
10
1.2
5
10
0.6
600
0.9
5
5
*1 Please refer to Specification Sheets for model numbers approved by safety standards.
*2 Optionally available.
PR22MA11NTZF
(6-pin DIP)
44
PR26MF21NSZF
(8-pin DIP)
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
OPTO
PHOTOINTERRUPTER LINEUP
★ Under
■
development
Photointerrupter Lineup
<Transmissive type>
Output type
Single phototransistor
Package type
Outline
Compact
PWB mounting type
High response speed
Surface-mount type
Model No. (series)
GP1S396HCP0F
/ GP1S09xHCZ0F /
GP1S19xHCZ0F
GP1S396HCPSF
/ GP1S296HCPSF / GP1S092HCPIF / GP1S19xHCxSF
PWB mounting type
GP1S5x
Horizontal slit
PWB mounting type
GP1S59J0000F
With connector
General purpose
Snap-in
GP1S173LCS2F
Compact
High resolution
PWB mounting type
★GP1A396HCP0F
Surface-mount type
★GP1A396HCPSF
High voltage
PWB mounting type
Case type
Digital output
Mounting method
(OPIC output)
Case type
Wide gap
With connector
General purpose
series
Page
46
46
47
47
/ GP1S273LCS1F
47
48
48
GP1A98HCZ0F▲
Surface-mount type
GP1A98HCPSF▲
48
PWB mounting type
GP1A5x
48
PWB mounting type
GP1A57HRJ00F
Snap-in
series
/ GP1A173LCS2F▲ / GP1A173LCSVF / GP1A273LCS1F▲
GP1A173LCS3F
48
48
49
<Reflective type>
Package type
Outline
Mounting method
Model No. (series)
Page
Leadless
Long focal distance
Surface-mount type
GP2S700HCP
49
High response speed
Compact,
thin (leadless)
General purpose
Surface-mount type
GP2S60
49
OPIC output
With connector
Light modulation type,
Sensitivity adjusted
Screw mounting type/
Compact snap-in/
Inverter light countermeasures
GP2A25 series / GP2A28 series /
GP2A200LCS0F / GP2A230LRS0F /
GP2A230LRSAF / ★GP2A430LCSAF /
GP2A240LCS0F / GP2A250LCS0F
50
<Application-specific photointerrupter lineup>
Detection type
Transmissive type
Outline (Output type etc.)
For amusement use
Mounting method
Screw mounting type
Model No. (series)
GP1A204HCS0▲
Page
51
Optoelectronics
Output type
Single phototransistor
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
45
OPTO
PHOTOINTERRUPTERS (TRANSMISSIVE TYPE)
■ Photointerrupters
<Transmissive type>
♦Single Phototransistor Output
<Compact type>
Model No.
Internal
connection
diagram
(Ta = 25°C)
Electro-optical
characteristics
Detecting
Current transfer ratio
Response time
and
Slit width
emitting
tr
CTR
(mm)
F
V
CE
RL VCE
IC
I
gap
(µs)
(%)
(mA) (V)
(mA) (kΩ) (V)
(mm)
TYP.
MIN.
Features
GP1S092HCPIF
Wide gap, for soldering reflow,
surface mount compatible, with positioning boss
(4.5 × 2.6 × 2.9 [height] mm)
2.0
0.3
2.0
5
5
50
0.1
1
5
GP1S093HCZ0F
Wide gap (4.5 × 2.6 × 2.9 [height] mm)
2.0
0.3
2.0
5
5
50
0.1
1
5
3.0
0.3
0.8
5
5
50
0.1
1
5
1.7
0.3
3.0
5
5
50
0.1
1
5
1.5
0.3
3.0
5
5
50
0.1
1
5
1.1
0.3
2.0
5
5
50
0.1
1
5
1.1
0.3
2.0
5
5
50
0.1
1
5
1.0
0.2
3.0
5
5
50
0.1
1
5
1.2
0.12
2.0
5
5
30
0.1
1
5
1.2
0.12
2.0
5
5
30
0.1
1
5
2.0
0.3
2.0
5
5
50
0.1
1
5
GP1S195HCZSF
GP1S195HCPSF
Wide gap, with positioning pin,
(5.5 × 2.6 × 4.8 [height] mm)
Compact, wide gap,
size: 3.6 × 2.0 × 2.7 (height) mm
Compact, wide gap, surface mount compatible,
size: 3.4 × 2.0 × 2.7 (height) mm
GP1S196HCZ0F
Compact, low profile (3.1 × 2.0 × 2.7 [height] mm)
GP1S196HCZSF
GP1S196HCPSF
Surface mount, for soldering reflow,
compact, low profile (3.1 × 2.0 × 2.7 [height] mm)
Surface mount, for soldering reflow,
compact, low profile (2.5 × 1.8 × 1.9 [height] mm)
Straight lead type,
compact, low profile (2.26 × 1.4 × 1.6 [height] mm)
Surface mount, for soldering reflow,
compact, low profile (2.26 × 1.4 × 1.6 [height] mm)
High resolution, wide gap,
with mounting hole (4.5 × 2.6 × 4.5 [height] mm)
GP1S094HCZ0F
GP1S194HCZ0F
GP1S296HCPSF
GP1S396HCP0F
GP1S396HCPSF
GP1S097HCZ0F
※ Topr: –25 to +85°C
※※ GP1SxxxHCZxF: Sleeve package, GP1SxxxHCPxF: Taped package
46
GP1S092HCPIF
GP1S093HCZ0F
GP1S094HCZ0F
GP1S194HCZ0F
GP1S195HCPSF/
GP1S195HCZSF
GP1S196HCZSF/
GP1S196HCPSF
GP1S296HCPSF
GP1S396HCPSF
GP1S396HCP0F
GP1S097HCZ0F
GP1S196HCZ0F
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
OPTO
PHOTOINTERRUPTERS (TRANSMISSIVE TYPE)
<Case type>
Model No.
(Ta = 25°C)
Internal
connection
diagram
Electro-optical characteristics
Detecting
and
Current transfer ratio
Response time
Slit width
emitting
tr
CTR
(mm)
F
V
CE
RL VCE
IC
I
gap
(µs)
(%)
(mA) (V)
(mA) (Ω) (V)
(mm)
TYP.
MIN.
Features
GP1S50J0000F
High resolution, both-side mounting type
3.0
0.5
2.5
20
5
3
2
100
2
GP1S51VJ000F
High resolution, side mounting type
3.0
0.5
2.5
20
5
3
2
100
2
GP1S52VJ000F
High resolution, PWB mounting type
3.0
0.5
2.5
20
5
3
2
100
2
GP1S53VJ000F
High resolution, PWB mounting type
5.0
0.5
2.5
20
5
3
2
100
2
2.0
0.15
2.0
20
5
38
0.5
1 000
2
5.0
0.5
2.5
20
5
3
2
100
2
4.2
0.5
2.5
20
5
3
2
100
2
High resolution, with positioning pin,
PWB mounting type
High resolution, with positioning pin,
PWB mounting type
High resolution, horizontal slit, with positioning pin,
PWB mounting type
GP1S56TJ000F
GP1S58VJ000F
GP1S59J0000F
※ Topr: –25 to +85°C
GP1S56TJ000F
GP1S51VJ000F
GP1S52VJ000F
GP1S58VJ000F
GP1S53VJ000F
GP1S59J0000F
<With connector>
Model No.
Internal
connection
diagram
(Ta = 25°C)
Optoelectronics
GP1S50J0000F
Electro-optical characteristics
Detecting
and
Current transfer ratio
Response time
Slit width
emitting
tr
CTR
(mm)
VCE
RL VCE
IC
IF
gap
(µs)
(%)
(mA) (V)
(mA) (Ω) (V)
(mm)
TYP.
MIN.
Features
GP1S173LCS2F
Snap-in mounting integrated connector type
Applicable to 3 kinds of thickness of mounting boards
5.0
0.5
2.5
20
5
3
2
100
2
GP1S273LCS1F
Snap-in mounting integrated connector type
Applicable to 3 kinds of thickness of mounting boards
Compact (Compatible with 1.5 mm pitch connector)
5.0
0.7
2.5
20
5
3
2
100
2
※ Topr: –25 to +85°C, –30 to +95°C (GP1S173LCS2F, GP1S273LCS1F)
GP1S173LCS2F
GP1S273LCS1F
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
47
OPTO
PHOTOINTERRUPTERS (TRANSMISSIVE TYPE)
★ Under
development
“OPIC” (Optical IC) is a trademark of SHARP Corporation. An OPIC consists of a
Type ( light-detecting element and signal-processing circuit integrated onto a single chip. )
<Compact type>
♦OPIC
Internal
connection
diagram
Model No.
(Ta = 25°C)
Electro-optical characteristics
Detecting
and
Threshold input current
Propagation delay time
Slit width
emitting
tPLH
IFHL
tPHL
IFLH
(mm)
VCC
RL
RL
VCC
IF
gap
(mA) (mA)
(µs)
(µs)
(kΩ)
(V)
(mA) (kΩ)
(V)
(mm)
MAX. MAX.
TYP. TYP.
Features
Compact, high response
speed, digital output, PWB
mounting
Compact, high response
speed, digital output,
surface mount
★ GP1A396HCP0F
★ GP1A396HCPSF
Voltage
regulator
Amplifier
GP1A98HCZ0F▲
GP1A98HCPSF▲
1.2
0.12
2.85
–
2.5 to
5.5
24 to
30
15
15
5
24
3.3
1.2
0.12
2.85
–
2.5 to
5.5
24 to
30
15
15
5
24
3.3
Compact, PWB mounting
3.2
0.5
8
–
3.3 to 3.9 to
24
20
2.0
10.0
10
3.9 to 3.3 to
20
24
Compact, surface mount
3.2
0.5
8
–
3.3 to 3.9 to
24
20
2.0
10.0
10
3.9 to 3.3 to
20
24
※ Topr = –25 to +85°C
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
GP1A396HCP0F
GP1A396HCPSF
GP1A98HCPSF
GP1A98HCZ0F
<Case type>
(Ta = 25°C)
Internal
connection
diagram
Model No.
Features
GP1A50HRJ00F
GP1A51HRJ00F
Voltage
regulator
Amplifier
GP1A52HRJ00F
GP1A53HRJ00F
GP1A57HRJ00F
Detecting
and
Slit width
emitting
(mm)
gap
(mm)
(When light is cut off:
low level)
VCC
(V)
Both-side mounting,
with screw hole
3.0
0.5
5
–
5
3
5
5
280
5
Side mounting, with screw hole
3.0
0.5
5
–
5
3
5
5
280
5
PWB mounting type
3.0
0.5
5
–
5
3
5
5
280
5
PWB mounting type
5.0
0.5
8
–
5
3
5
8
280
5
10.0
1.8
7
–
5
3
5
7
280
5
5.0
0.5
8
–
5
3
5
8
280
5
3.0
0.5
–
5
5
5
3
5
280
5
PWB mounting type,
with positioning pin
PWB mounting type,
with positioning pin
GP1A58HRJ00F
Electro-optical characteristics
Threshold input current
Propagation delay time
tPLH
IFHL
tPHL
IFLH
RL
VCC
IF
(mA)
(mA)
(µs)
(µs)
(V)
(mA) (Ω)
MAX.
MAX.
TYP.
TYP.
Voltage
regulator
Amplifier
PWB mounting type
GP1A52LRJ00F
(When light is cut off:
high level)
※ Topr = –25 to +85°C
GP1A50HRJ00F
48
GP1A51HRJ00F
GP1A52LRJ00F
(GP1A52HRJ00F)
GP1A53HRJ00F
⎧GP1A58HRJ00F ⎫
⎜with positioning pin⎜
⎩
⎭
GP1A57HRJ00F
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
PHOTOINTERRUPTERS
(TRANSMISSIVE TYPE)/(REFLECTIVE TYPE)
OPTO
“OPIC” (Optical IC) is a trademark of SHARP Corporation. An OPIC consists of a
Type ( light-detecting element and signal-processing circuit integrated onto a single chip. )
<With 3-pin connector terminal>
♦OPIC
Model No.
Internal
connection
diagram
Features
GP1A173LCS2F▲
Voltage
regulator
Amplifier
GP1A173LCSVF
GP1A273LCS1F▲
with 3-pin connector
GP1A173LCS3F
3 V operation,
snap-in mounting integrated
connector type*1
Snap-in mounting integrated
connector type*1
Snap-in mounting integrated
connector type*1,
enforced electrostatic discharge
(ESD) type
Integrated connector, compatible
with 1.5 mm pitch connector,
snap-in mounting type*1
(Ta = 25°C)
Electro-optical characteristics
Low level output voltage
Supply voltage
VCC
VOL
VCC
Light
IOL
(V)
(V)
(mA)
(V)
cut-off
MIN.
MAX.
MAX.
Detecting
and
Slit width
emitting
(mm)
gap
(mm)
5.0
0.5
2.7
5.5
0.35
No
4
3.3
5.0
0.5
4.5
5.5
0.35
No
4
5
5.0
0.5
4.5
5.5
0.35
No
4
5
5.0
0.7
4.5
5.5
0.35
No
4
5
※ Topr: –20 to +75°C, –30 to +95°C (GP1A173LCS3F, GP1A173LCS2F, GP1A173LCSVF, GP1A273LCS1F)
*1 Applicable to 3 kinds of thickness of mounting boards.
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
■
GP1A273LCS1F
Optoelectronics
GP1A173LCS3F
GP1A173LCS2F
GP1A173LCSVF
Photointerrupters
<Reflective type>
Phototransistor Output
<Compact>
♦Single
Model No.
Internal
connection
diagram
(Ta = 25°C)
Features
Electro-optical characteristics
Optimum
detecting
Current transfer ratio
Response time
distance CTR (%)
VCE
tr (µs)
IC
VCE
RL
IF
(mm)
(mA)
(V)
TYP. (mA) (kΩ)
(V)
MIN.
GP2S700HCP
Compact (4 × 3 × 2 [height] mm),
long focal distance, surface mounting leadless type
4
1.5
4
2
20
0.1
1
2
GP2S60
Thin (3.2 × 1.7 × 1.1 [height] mm), surface mounting
leadless type
1
1.0
4
2
20
0.1
1
2
※ Topr: –25 to +85°C
GP2S700HCP
GP2S60
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
49
OPTO
PHOTOINTERRUPTERS (REFLECTIVE TYPE)
★ Under
development
“OPIC” (Optical IC) is a trademark of SHARP Corporation. An OPIC consists of a
Output ( light-detecting element and signal-processing circuit integrated onto a single chip. )
<With 3-pin connector terminal>
♦OPIC
Internal
connection
diagram
Model No.
GP2A200LCS0F
GP2A240LCS0F
GP2A250LCS0F
GP2A25J0000F
GP2A230LRS0F
GP2A230LRSAF
★ GP2A430LCSAF
GP2A25NJJ00F
GP2A25DJ000F
GP2A28AJ000F
(Ta = 25°C)
Electro-optical characteristics
Optimum
Supply voltage Dissipation current Low level output voltage
detecting
VCC
ICC
VOL
distance
VCC
VCC
(V)
(mA)
(V)
(mm)
(V)
(V)
MIN. MAX. MAX.
MAX.
Features
Multiple types of paper detectable, light modulation type,
5 to 15
with connector, sensitivity adjusted
Applicable to inverter fluorescent lamp,
5 to 15
light modulation type, with connector, sensitivity adjusted
(Following
diagram [A]) Static electricity resistant,
2.5 to
applicable to inverter fluorescent lamp,
12.5
light modulation type, with connector, sensitivity adjusted
Multiple types of paper detectable, light modulation type,
3 to 7
with connector, sensitivity adjusted
Compact, screw-clamp type, multiple types of paper
(Following detectable, light modulation type, with connector
diagram [B])
3 to 7
Compact, hook type, multiple types of paper detectable,
(Following light modulation type, with connector
diagram [C])
Multiple types of paper detectable, light modulation type,
sensitivity adjusted, improved light-resistance characteristic 3 to 7
for inverter lighting, built-in visible light cut filter
(Following
Multiple types of paper detectable, light modulation type,
diagram [A])
3 to 7
with connector, sensitivity adjusted
Multiple types of paper detectable, light modulation type,
3 to 7
with connector, sensitivity adjusted, hook type
4.75
5.25
30*1
5
0.4
5
4.75
5.25
30*1
5
0.4
5
4.75
5.25
30*1
5
0.4
5
4.75
5.25
30*1
5
0.4
5
4.75
5.25
20*1
5
0.4
5
3.0
5.5
10*1
3.3 to 5
0.4
3.3 to 5
4.75
5.25
30*1
5
0.4
5
4.75
5.25
30*1
5
0.4
5
4.75
5.25
30*1
5
0.4
5
※ Topr: –10 to +60°C (GP2A25J0000F, etc.)
–10 to +70°C (GP2A200LCS0F, GP2A240LCS0F, GP2A250LCS0F, GP2A230LRS0F, GP2A230LRSAF, GP2A430LCSAF)
*1 Smoothing value R L = ∞
[Internal connection diagram]
[A]
Voltage regulator
Demodulator
Amplifier
Comparator
Oscillator
Synchronous detector
GP2A25J0000F
⎧ GP2A25NJJ00F, GP2A200LCS0F, ⎫
⎜GP2A240LCS0F
⎜
⎩
⎭
GP2A250LCS0F
GP2A25DJ000F
GP2A230LRS0F
GP2A230LRSAF
[GP2A430LCSAF]
GP2A28AJ000F
[B]
Voltage regulator
Demodulator
(10kΩ)
Amplifier
Comparator
Oscillator
Synchronous detector
[C]
Voltage regulator
Amplifier
Comparator
50
Oscillator
Synchronous detector,
Demodulator
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
OPTO
■
PHOTOINTERRUPTERS FOR SPECIFIC APPLICATIONS
Photointerrupters for Specific Applications
♦Transmissive
Type
<For amusement use>
Model No.
Internal
connection
diagram
Voltage regulator
GP1A204HCS0▲
(Ta = 0 to +40°C)
Features
Connector with lock,
screw mounting type,
high resistant to noise
Detecting
and emitting
gap
(mm)
Slit width
(mm)
4.0
0.5
Electro-optical characteristics
Operating voltage
Low level output voltage
VCC (V)
IOL
VCC
VOL (V) Light
MIN.
MAX.
MAX. cut-off
(mA)
(V)
10.8
24
0.4
Yes
5
10.8 to 24
Amplifier
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
Optoelectronics
GP1A204HCS0
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
51
OPTO
PROXIMITY SENSOR /
PROXIMITY SENSOR WITH INTEGRATED AMBIENT LIGHT SENSOR
☆ New
■ Proximity
Sensor
Absolute maximum ratings
Model No.
GP2AP002S30F
Features
Compact size (4.0 × 2.0 × 1.25 t mm)
Drastically reduced LED current consumption by
employing a light modulation system
Built-in LEDs for simple optical design and I2C output
(LED emission duty: MAX. 0.3%)
VCC
(V)
Topr
(°C)
3.8
–25 to +85
product
(Ta = 25°C)
Electro-optical characteristics
NonDetecting
Peak
Dissipation
detecting
distance
emission
current
distance
Lon
wavelength
ICC (µA)
Loff
(mm)
λp
TYP.
(mm)
MIN.
(nm)
MAX.
240
25
150
940
GP2AP002S30F
■ Proximity
Sensor with Integrated Ambient Light Sensor
Absolute maximum ratings
(Ta = 25°C)
Electro-optical characteristics
Proximity sensor portion
Model No.
GP2AP030A00F
☆GP2AP007A00F
☆GP2AP008T00F
Features
LED and ambient light sensor combined in
a single package (4.0 × 2.1 × 1.25 t mm)
Built-in LEDs for simple optical design
Illuminance output: digital 16-bit output
(Minimum detectable illuminance: 0.02 lx)
I2C output compatible (proximity sensor,
ambient light sensor)
LED and ambient light sensor combined in
a single package (2.5 × 2.0 × 1.0 t mm)
Compact with reduced mounting area
Illuminance output: digital 16-bit output
(Minimum detectable illuminance: 0.1 lx)
Small aperture compatible
I2C output compatible (proximity sensor,
ambient light sensor)
LED and ambient light sensor combined in
a single package (3.94 × 2.36 × 1.35 t mm)
Illuminance output: digital 16-bit output
(Minimum detectable illuminance: 0.1 lx)
Small aperture compatible
I2C output compatible (proximity sensor,
ambient light sensor)
GP2AP030A00F
52
Ambient light sensor portion
RecomADC
Peak
mended
conversion
emission
Output
illuminance
time
wavelength
resolution
range
Tint
(bit)
λp
Ev
(ms)
(nm)
(lx)
TYP.
VCC
(V)
Topr
(°C)
Dissipation
current
Icc
(µA)
TYP.
5.5
–35 to
+85
65
100
940
0.02 to
10 000
16
100
2.2 to
5.5
–30 to
+85
100
100
940
0.1 to
100 000
16
30
2.2 to
5.5
–30 to
+85
100
100
940
0.1 to
100 000
16
30
GP2AP007A00F
Detecting
distance
Lon
(mm)
TYP.
GP2AP008T00F
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
PROXIMITY/GESTURE SENSOR WITH
INTEGRATED AMBIENT LIGHT SENSOR / UV LIGHT SENSORS
OPTO
★ Under
■ Proximity/Gesture
Sensor with Integrated Ambient Light Sensor
Absolute maximum ratings
Model No.
GP2AP054A00F
development
Features
LED and ambient light sensor combined in
a single package (4.0 × 2.1 × 1.25 t mm)
Simultaneous operation of the gesture
recognition and illuminance functions is
possible
Low power consumption mode is available
for the proximity sensor
Capable of holding a total of 4 gesture
detection results
VCC
(V)
Topr
(°C)
5.5
–35 to
+85
(Ta = 25°C)
Electro-optical characteristics
Proximity/gesture
Ambient light sensor portion
Dissipasensor portion
Dissipation
tion
RecomADC
current Detecting
Peak
current
mended
conversion
Icc
distance
emission
Output
Icc
illuminance
time
(Gesture)
Lon
wavelength
resolution
(µA)
range
Tint
(µA)
(mm)
(bit)
λp
TYP.
Ev
(ms)
TYP.
TYP.
(nm)
(lx)
TYP.
100
320
100
940
0.02 to
10 000
16
30
■ UV
Light Sensors
(Ta = 25°C)
Absolute maximum ratings
Model No.
★GA1AUV100WP
Features
Detects only UV rays contained within
sunlight (no sensitivity to visible light)
Built-in ambient light sensor
Compact size: 2.0 × 1.6 × 0.6 t mm
I2C output compatible
VCC
(V)
I2C voltage
VI2C
(V)
2.2 to
5.5
1.7 to
Vcc
Electro-optical characteristics
Built-in
Dissipation
ADC
clock
current
Output conversion
Topr
frequency
Icc
resolution
time
(°C)
fosc
(µA)
(bit)
(ms)
(MHz)
TYP.
TYP.
TYP.
–35 to
+85
65
2.62
16
25
Recommended
illuminance range
Ev
(lx)
Sunlight
(AM1.5 equivalent)
Optoelectronics
GP2AP054A00F
UV: 0 to 200 000
Illuminance: 0 to 120 000
GA1AUV100WP
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
53
OPTO
■ OPIC
OPIC LIGHT DETECTORS
“OPIC” (Optical IC) is a trademark of SHARP Corporation. An OPIC consists of a
Light Detectors ( light-detecting element and signal-processing circuit integrated onto a single chip. )
Absolute maximum ratings
Model No.
IS485E
IS486E
Type
Built-in schmidt trigger
circuit, amplifier and
voltage regulator
EVLH
Package
VCC
(V)
Transparent
epoxy resin with
condenser (lens)
–0.5 to +17
175
50
–25 to +85
–
–0.5 to +17
175
50
–25 to +85
35
P
IO
(mW) (mA)
Topr
(°C)
(Ta = 25°C)
Electro-optical characteristics
EVHL
tPLH
tPHL
VCC
(V)
(µs)
TYP.
(µs)
TYP.
VCC
(V)
EV
(Ix)
RL
(Ω)
35
5
5
3
5
50
280
–
5
3
5
5
50
280
(Ix)
(Ix)
MAX. MAX.
IS485E
(IS486E)
<Model employing a light modulation system>
(Ta = 25°C)
Absolute maximum ratings
Model No.
IS471FE*1, *3
Type
Package
Built-in pulse driver
circuit at the emitter
Visible light
side, synchronous
cut-off epoxy
detector circuit,
resin
amplifier circuit and
demodulator circuit
VCC
(V)
–0.5 to +16
Topr
(°C)
VOL
(V)
MAX.
–25 to +60
0.35
P
IO
(mW) (mA)
250
50
Electro-optical characteristics*2
tPHL
tPLH
VOH
(V)
(µs)
(µs)
VCC
MIN.
(V)
TYP.
TYP.
4.97
400
400
5
RL
(Ω)
External
disturbing light
illuminance
EVDX(Ix) TYP.
280
7 000
*1 IS471FE is less susceptible to disturbing effects thanks to the light modulation system
*2 Vcc = 5 V
*3 Straight lead type (IS471FSE) is also available.
IS471FE
54
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
PHOTOTRANSISTOR LINEUP /
PHOTOTRANSISTORS
OPTO
■ Phototransistor
Package
Epoxy resin with lens
Surface mounting
leadless type
Lineup
Output type
Single phototransistor
Model No.
Half
sensitivity
angle
Features
Visible light
cut-off
Standard
General purpose/Narrow acceptance
±13°
PT480E00000F
Compact, thin
±35°
PT4800E0000F
PT480FE0000F
PT4800FE000F /
PT4850FE000F▲
Darlington
phototransistor
High sensitivity/Narrow acceptance
±13°
PT481E00000F▲
PT481FE0000F▲
High sensitivity/Intermediate acceptance
±40°
—
Single phototransistor
Compact
(side view/top view mounting possible)
±15°
Darlington
phototransistor
Compact
(side view/top view mounting possible)
±15°
PT491FE0000F
PT100MC0MP
PT100MF0MP
—
PT100MF1MP
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
Model No.
PT100MC0MP
Single
PT100MF0MP*1
Absolute maximum ratings
Topr
PC
VCEO
(mW)
(°C)
(V)
Package
Surface mounting
leadless type with lens
35
75
75
–30 to +85
–30 to +85
MAX.
1.7
5.1
1.15
5
3.45
5
∆θ
(°)
TYP.
λp
(nm)
TYP.
20
±15
900
20
±15
910
ICEO(A)
VCE
(V)
Ee
(mW/cm2)
MAX.
1
1 × 10 –7
1
1×
10 –7
10 –7
PT480E00000F
35
75
–25 to +85
0.4
TYP. 1.7
5
1
1×
20
±13
800
PT480FE0000F*1
35
75
–25 to +85
0.25
TYP. 0.8
5
1
1 × 10 –7
20
±13
860
10 –7
35
75
–25 to +85
0.12
TYP. 0.4
5
1
1×
20
±35
800
PT4800FE000F*1
35
75
–25 to +85
0.08
TYP. 0.25
5
1
1 × 10 –7
20
±35
860
PT4850FE000F▲*1
35
75
–25 to +85
0.12
0.56
5
1
1 × 10 –7
20
±35
860
10 –6
PT4800E0000F
Epoxy resin with lens
PT481E00000F▲
Darlington
35
Ic (mA)
VCE
(V)
MIN.
PT481FE0000F▲*1
Epoxy resin with lens
PT491FE0000F*1
PT100MF1MP*1
35
75
–25 to +85
1.5
25
2
0.1
1×
10
±13
800
35
75
–25 to +85
0.9
27
2
0.1
1 × 10 –6
10
±13
860
1×
10 –6
10
±40
860
1×
10 –6
10
±15
860
35
Surface mounting
leadless type with lens
35
75
75
–25 to +85
–30 to +85
0.2
0.2
0.8
2
1.2
5
Ev, 2 Ix
0.01
Optoelectronics
Type
■ Phototransistors
*1 Visible light cut-off type
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
PT100MF0MP
⎧PT100MF1MP, ⎫
⎜PT100MC0MP: ⎜
⎜Transparent resin⎜
⎩
⎭
PT480E00000F
(PT481E00000F▲)
PT480FE0000F
(PT481FE0000F▲)
PT4800E0000F
⎧PT4800FE000F, ⎫
⎜
⎜
⎩PT4850FE000F▲⎭
PT491FE0000F
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
55
OPTO
■ PIN
PIN PHOTODIODES
Photodiodes
Model No.
PD410PI2E00F
PD411PI2E00F
PD412PI2E00F▲
PD413PI2E00F
PD100MC0MP
PD100MF0MP
Features
(Ta = 25°C)
Package
(Material)
Visible light cut-off epoxy
resin with condenser (lens)
Transparent epoxy resin with
PIN type
condenser (lens)
Transparent epoxy resin with
condenser (lens)
PIN type
Visible light cut-off epoxy
IrDA1.0
resin with condenser (lens)
Surface mounting Transparent epoxy resin
leadless type
board with lens
Surface mounting Visible light cut-off epoxy
leadless type
resin board with lens
VR
(V)
tr, tf
(µs)
TYP.
VR
(V)
RL
(kΩ)
λp
(nm)
TYP.
1 × 10 –8
10
0.2
10
1
1 000
100
1 × 10 –8
10
0.2
10
1
960
3.5
100
1 × 10 –8
10
0.25
10
1
800
–25 to +85
MIN. 4.5
(TYP. 5.4)
100
1 × 10 –8
10
0.2
10
1
960
–
–30 to +85
0.6
100
1 × 10 –8
10
0.01
15
0.18
820
–
–30 to +85
0.4
100
1 × 10 –8
10
0.01
15
0.18
850
Topr
(°C)
Isc
(µA)
MIN.
3.31
–25 to +85
3.31
Active
area
(mm2)
Ev
(Ix)
Id
(A)
MAX.
2.5
100
–25 to +85
5.0
3.31
–25 to +85
3.31
The model marked with ▲ may not be available in the near future. Contact with SHARP for details before use.
PD410PI2E00F
⎧PD411PI2E00F: transparent; PD412PI2E00F : transparent,⎫
▲
⎜
⎜
⎩ PD413PI2E00F
⎭
56
PD100MC0MP
(PD100MF0MP: black)
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
INFRARED EMITTING DIODE LINEUP /
INFRARED EMITTING DIODES
OPTO
Emitting Diode Lineup
Type
Single-end lead
(Side view type)
Surface mount type
Package
Half intensity
angle
Features
Epoxy resin with lens
Epoxy resin with lens/
leadless
General purpose/Narrow beam angle
±13°
GL480E00000F
Compact and thin
±30°
GL4800E0000F
Compact/Narrow beam angle
±10°
GL100MN0MP
±10°
GL100MN1MP
±80°
GL100MD1MP1
(Mountable for Top view/
Side view type)
High output type
Compact/Wide beam angle
■
Model No.
Infrared Emitting Diodes
Model No.
Package, features
GL480E00000F
(Ta = 25°C)
Absolute maximum ratings
VR
P
Topr
IF
(mA) (V) (mW)
(°C)
Radiant flux Φe (mW)
IF
MIN.
TYP.
(mA)
VF (V)
TYP.
MAX.
IF
(mA)
∆θ
(°)
TYP.
λp
(nm)
TYP.
50
6
75
–25 to +85
0.7
–
20
1.2
1.4
20
±13
950
50
6
75
–25 to +85
0.7
1.6
20
1.2
1.4
20
±30
950
50
6
75
–30 to +85
1.0
3.0
(MAX.)
20
1.2
1.4
20
±10
940
50
6
75
–30 to +85
2.0
6.0
(MAX.)
20
1.2
1.5
20
±10
940
50
6
75
–30 to +85
–
6.0
(MAX.)
20
–
1.5
20
±80
940
Epoxy resin with lens
GL4800E0000F
GL100MN0MP
GL100MN1MP
GL100MD1MP1
Surface mounting leadless type,
epoxy resin board with lens
Surface mounting leadless type,
epoxy resin board with lens,
high output type
Surface mounting leadless type,
epoxy resin board with lens,
wide beam angle
GL480E00000F
GL4800E0000F
Optoelectronics
■ Infrared
GL100MN0MP
(GL100MN1MP, GL100MD1MP1)
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
57
OPTO
OPTICAL-ELECTRIC SENSOR LINEUP
★ Under
■ Distance
Measuring Sensor Lineup
Output
Detected distance
1-bit digital output according
to distance measuring
Analog voltage output
according to distance
measuring
(Including I2C output)
Features
Battery drive compatible, compact, 1-bit digital output
GP2Y0D805Z0F
10 cm
Battery drive compatible, compact, 1-bit digital output
GP2Y0D810Z0F
GP2Y0D815Z0F
15 cm
Battery drive compatible, compact, 1-bit digital output
13 cm
1-bit digital output
GP2Y0D413K0F
24 cm
1-bit digital output
GP2Y0D21YK0F
80 cm
1-bit digital output
GP2Y0D02YK0F
1.5 to 15 cm
2 to 15 cm
4 to 50 cm
CMOS type
Analog output
Analog output
GP2Y0AF15 series
GP2Y0A51SK0F
Analog output
GP2Y0A41SK0F / GP2Y0AF30 series
Analog output
GP2Y0E02A
I2C output
GP2Y0E02B
Analog, I2C output
GP2Y0E03
10 to 80 cm
Analog output
GP2Y0A21YK0F
10 to 150 cm
Compact (22 × 8 × 7.2 [T] mm),
Analog output
GP2Y0A60SZLF
20 to 150 cm
Analog output
GP2Y0A02YK0F
100 to 550 cm
Analog output
GP2Y0A710K0F
Sensor Unit Lineup
Output
Analog output
Digital output
Features
Model No.
Pulse analog output, single-shot detection of house dust,
general purpose
GP2Y1010AU0F
Single-shot detection of house dust, LED drive via external input,
high sensitivity
GP2Y1012AU0F
Digital (PWM) output, built-in microprocessor controller,
single-shot detection of house dust, high sensitivity
GP2Y1023AU0F
Digital (UART) output, built-in microprocessor controller,
sensing can discriminate between PM2.5 and PM10, internal
cleaning possible
58
Model No.
5 cm
4 to 30 cm
■ Dust
development
★GP2Y1030AU0F
OPTO
DISTANCE MEASURING SENSORS
■ Distance
Measuring Sensors (1)
♦Digital Output
GP2Y0D805Z0F
5
GP2Y0D810Z0F
10
GP2Y0D815Z0F
15
GP2Y0D413K0F
13
GP2Y0D21YK0F
24
GP2Y0D02YK0F
80
*1 Vcc = 5 V
Absolute maximum ratings
Features
Light detector,
infrared LED and signal processing circuit,
short distance measuring type,
battery drive compatible
(operating power supply: 2.7 to 6.2 V)
Light detector,
infrared LED and signal processing circuit,
short distance measuring type,
battery drive compatible
(operating power supply: 2.7 to 6.2 V)
Light detector,
infrared LED and signal processing circuit,
short distance measuring type,
battery drive compatible
(operating power supply: 2.7 to 6.2 V)
Distance measuring sensor united with PSD※,
infrared LED and signal processing circuit,
digital voltage output according to the measured
distance
Distance measuring sensor united with PSD※,
infrared LED and signal processing circuit,
digital voltage output according to the measured
distance
Distance measuring sensor united with PSD※,
infrared LED and signal processing circuit,
long distance measuring type
(No external control signal required),
digital voltage output according to the measured
distance
Electro-optical characteristics*1
Dissipation current
VOL
(V)
Operating Standby
MAX.
(mA)
(µA)
Vcc
(V)
Topr
(°C)
VOH
(V)
MIN.
–0.3 to +7
–10 to +60
Vcc –0.6
0.6
MAX. 6.5
MAX. 8
–0.3 to +7
–10 to +60
Vcc –0.6
0.6
MAX. 6.5
MAX. 8
–0.3 to +7
–10 to +60
Vcc –0.6
0.6
MAX. 6.5
MAX. 8
–0.3 to +7
–10 to +60
Vcc –0.3
0.6
–
–
–0.3 to +7
–10 to +60
Vcc –0.3
0.6
MAX. 40
–
–0.3 to +7
–10 to +60
Vcc –0.3
0.6
MAX. 50
–
※ PSD: Position Sensitive Detector
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Optoelectronics
Model No.
Detected
distance
(cm)
(Ta = 25°C)
59
OPTO
DISTANCE MEASURING SENSORS
☆ New
product
■ Distance
Measuring Sensors (2)
♦ Analog Output (Including I2C output)
Model No.
Distance
measuring
range
(cm)
(Ta = 25°C)
Absolute maximum ratings
Features
Vcc
(V)
Topr
(°C)
–0.3 to +7
–10 to +60
☆GP2Y0AF15 series
1.5 to 15
Distance measuring sensor united with PSD※,
infrared LED and signal processing circuit,
short measuring cycle (16.5 ms), compact,
lineup of various connector shapes
GP2Y0A51SK0F
2 to 15
Distance measuring sensor united with PSD※,
infrared LED and signal processing circuit,
short measuring cycle (16.5 ms)
–0.3 to +7
–10 to +60
☆GP2Y0AF30 series
4 to 30
Distance measuring sensor united with PSD※,
infrared LED and signal processing circuit,
short measuring cycle (16.5 ms), compact,
lineup of various connector shapes
–0.3 to +7
–10 to +60
GP2Y0A41SK0F
4 to 30
Distance measuring sensor united with PSD※,
infrared LED and signal processing circuit,
short measuring cycle (16.5 ms)
–0.3 to +7
–10 to +60
GP2Y0E02A
4 to 50
–0.3 to +3.6
–10 to +60
GP2Y0E02B
4 to 50
–0.3 to +3.6
–10 to +60
GP2Y0E03
4 to 50
Infrared LED and CMOS image sensor with built-in
signal processing circuit, compact size
(16.7 × 11 × 5.2 mm), high-precision measurement,
analog / I2C output both compatible
–0.3 to +5.5
–10 to +60
GP2Y0A21YK0F
10 to 80
Distance measuring sensor united with PSD※,
infrared LED and signal processing circuit,
linear voltage output
–0.3 to +7
–10 to +60
GP2Y0A60SZLF
GP2Y0A02YK0F
GP2Y0A710K0F
Infrared LED and CMOS image sensor with built-in
signal processing circuit, compact size
(18.9 × 8 × 5.2 mm), high-precision measurement,
analog output
Infrared LED and CMOS image sensor with built-in
signal processing circuit, compact size
(18.9 × 8 × 5.2 mm), high-precision measurement,
I2C output
Distance measuring sensor united with PSD※,
infrared LED and signal processing circuit,
10 to 150 compact type (22 x 8 x 7.2 mm),
long distance measuring type
(No external control signal required)
Distance measuring sensor united with PSD※,
infrared LED and signal processing circuit,
20 to 150
long distance measuring type
(No external control signal required)
Distance measuring sensor united with PSD※,
infrared LED and signal processing circuit,
100 to 550
long distance measuring type
(No external control signal required)
–0.3 to +5.5
–10 to +60
–0.3 to +7
–10 to +60
–0.3 to +7
–10 to +60
*1 Vcc = 5 V
*2 When Vcc = 3 V: Vo (TYP.) = 0.35 V (at L = 150 cm); ∆Vo (TYP.) = 1.6 V (at L = 150 cm → 20 cm)
60
Electro-optical characteristics*1
Dissipation
VOH
VOL
current
(V)
(V)
Operating
MIN.
MAX.
(mA)
VO (TYP.) = 0.4 V
(at L = 15 cm),
TYP. 17
∆VO (TYP.) = 2.3 V
(at L = 15 cm → 1.5 cm)
VO (TYP.) = 0.4 V
(at L = 15 cm),
TYP. 12
∆VO (TYP.) = 2.25 V
(at L = 15 cm → 2 cm)
VO (TYP.) = 0.4 V
(at L = 30 cm),
TYP. 17
∆VO (TYP.) = 2.3 V
(at L = 30 cm → 4 cm)
VO (TYP.) = 0.4 V
(at L = 30 cm),
MAX. 22
∆VO (TYP.) = 2.25 V
(at L = 30 cm → 4 cm)
VOUT (A) 1 = 0.3 to 0.8 V
(at L = 50 cm),
MAX. 36
VOUT (A) 3 = 2.1 to 2.3 V
(at L = 4 cm)
D1 = 45 to 50 cm
(at L = 50 cm),
MAX. 36
D3 = 3 to 5 cm
(at L = 4 cm)
VOUT (A) 1 = 0.3 to 0.8 V,
D1 = 45 to 50 cm
(at L = 50 cm),
MAX. 36
VOUT (A) 3 = 2.1 to 2.3 V,
D3 = 3 to 5 cm
(at L = 4 cm)
VO (TYP.) = 0.4 V
(at L = 80 cm),
MAX. 40
∆VO (TYP.) = 1.9 V
(at L: 80 cm → 10 cm)
VO (TYP.) = 0.65 V *2
(at L = 150 cm),
∆VO (TYP.) = 3.0 V
(at L = 150 cm → 20 cm)
VO (TYP.) = 0.4 V
(at L = 150 cm),
∆VO (TYP.) = 2.05 V
(at L = 150 cm → 20 cm)
VO (TYP.) = 2.5 V
(at L = 100 cm),
∆VO (TYP.) = 0.7 V
(at L = 100 cm → 200 cm)
MAX. 50
MAX. 50
TYP. 30
※ PSD: Position Sensitive Detector
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
DISTANCE MEASURING SENSORS /
DUST SENSOR UNIT
★ Under
GP2Y0D805Z0F
⎧
⎫
GP2Y0D810Z0F,
⎜
GP2Y0D815Z0F, ⎜
⎜
GP2Y0D810Z1F ⎜
⎩
⎭
GP2Y0AF30 series
■ Dust
GP2Y0E02A
(GP2Y0E02B)
GP2Y0E03
GP2Y0A60SZLF
GP2Y0AF15 series
GP2Y0A21YK0F
GP2Y0A51SK0F
GP2Y0D02YK0F
(GP2Y0A02YK0F)
GP2Y0A710K0F
⎧ GP2Y0D21YK0F, ⎫
⎜GP2Y0A41SK0F ⎜
⎜
⎜
⎜GP2Y0D413K0F: ⎜
⎜without mounting ⎜
⎩ hole
⎭
Sensor Unit
Model No.
GP2Y1010AU0F
GP2Y1012AU0F
GP2Y1023AU0F
★GP2Y1030AU0F
development
Topr
(°C)
Features
• Built-in infrared emitting diode,
photodiode and signal processing circuit
• Compact, single-shot detection of house dust
• Output: Analog voltage
• High sensitivity
• Built-in infrared emitting diode,
photodiode and signal processing circuit
• Compact, single-shot detection of house dust
• Output: Analog voltage
• High sensitivity
• Built-in microcomputer
• Built-in infrared emitting diode,
photodiode and signal processing circuit
• Compact, single-shot detection of house dust
• Output: Digital signal output (PWM)
• Built-in infrared emitting diode,
photodiode and signal processing circuit
• Built-in microcomputer
• Sensing can discriminate between PM2.5 and
PM10
• Internal cleaning possible
GP2Y1010AU0F
(GP2Y1012AU0F, GP2Y1023AU0F)
(Ta = 25°C)
Electro-optical characteristics
Operating
Detection
supply voltage Dissipation
Output
current
concentration
(V)
(mA)
μg/m3 (TYP.)
4.5 to 5.5
TYP. 11
0 to 600
Analog voltage
4.5 to 5.5
TYP. 11
0 to 240
Analog voltage
4.75 to 5.25
TYP. 15
0 to 240
Digital signal (PWM)
Temperature correction
Averaging
3 to 5.5
TYP. 25
0 to 500
Digital signal (UART)
–10 to +65
Optoelectronics
OPTO
GP2Y1030AU0F
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
61
OPTO
■ IR
IR DETECTING UNIT FOR REMOTE CONTROL LINEUP
(CLASSIFIED BY FORM)
Detecting Unit for Remote Control Lineup (Classified by Form)
Type
IR detecting unit
for remote control
Package
Detection
Form
position*1
(from PCB)
Lead L bend with
shield case
(holder)
16.0 mm*2
Features
Compact size
Compact size, Strengthened
resistance to electromagnetic
induction noise (Mesh type)
12.0 mm*3
Compact size
Compact size, Strengthened
resistance to electromagnetic
induction noise (Mesh type)
6.8 mm*4
Compact size
Compact size, Strengthened
resistance to electromagnetic
induction noise (Mesh type)
Lead straight
with shield case
(holder)
19.0 mm
9.6 mm
Compact size, Strengthened
resistance to electromagnetic
induction noise (Mesh type)
Compact size
Compact size, Strengthened
resistance to electromagnetic
induction noise (Mesh type)
Holderless
Lead straight
6.0 mm
bend*5
Lead L
5.3 mm
*1 L
ead straight: Distance from lens center to mounting board upper surface
No mesh lead L bend: Distance from tip of lens to mounting board upper surface
Mesh-type lead L bend: Distance from tip of mesh to mounting board upper surface
*2 Mesh type (strengthened resistance to electromagnetic induction noise): 16.4 mm
*3 Mesh type: 12.4 mm
*4 Mesh type: 7.2 mm
*5 Mesh type: 5.3 mm
62
Operating voltage
Model No.
3 to 5 V
GP1UE28XK0VF series
5V
GP1UM28XK0VF series
3 to 5 V
GP1UE28RK0VF series
5V
GP1UM28RK0VF series
3 to 5 V
GP1UE27XK0VF series
5V
GP1UM27XK0VF series
3 to 5 V
GP1UE27RK0VF series
5V
GP1UM27RK0VF series
3 to 5 V
GP1UE26XK0VF series
5V
GP1UM26XK0VF series
3 to 5 V
GP1UE26RK0VF series
5V
GP1UM26RK0VF series
3 to 5 V
GP1UE29QK0VF series
5V
GP1UM29QK0VF series
3 to 5 V
GP1UE28YK0VF series
5V
GP1UM28YK0VF series
3 to 5 V
GP1UE28QK0VF series
5V
GP1UM28QK0VF series
3 to 5 V
GP1UX31QS series
5V
GP1UX51QS series
3 to 5 V
GP1UX31RK series
5V
GP1UX51RK series
OPTO
Detecting Units for Remote Control
Absolute maximum ratings
Type
Series No.
GP1UM26XK0VF
With shield case (holder),
5 V drive
With shield case (holder),
5 V drive,
Strengthened resistance to
electromagnetic induction
noise
With shield case (holder),
3 to 5 V drive
With shield case (holder),
3 to 5 V drive,
Strengthened resistance to
electromagnetic induction
noise
Holderless, 5 V drive,
Strengthened resistance to
electromagnetic induction
noise
Holderless, 3 to 5 V drive,
Strengthened resistance to
electromagnetic induction
noise
(Ta = 25°C)
Electrical characteristics
VOH
VOL
fo
Icc
(V)
(V)
(kHz)
(mA)*1
MAX.
MIN.
MAX. TYP.
Vcc (V)
Topr (°C)
Operating
voltage
(V)
0 to 6.0
–10 to +70
4.5 to 5.5 0.6 (0.65) Vcc–0.5
Size (mm)
0.45
*3
5.6 × 9.6 × 6.8
5.6 × 9.6 × 12.0
GP1UM27XK0VF
0 to 6.0
–10 to +70
4.5 to 5.5 0.6 (0.65) Vcc–0.5
0.45
*3
GP1UM28XK0VF
0 to 6.0
–10 to +70
4.5 to 5.5 0.6 (0.65) Vcc–0.5
0.45
*3
5.6 × 9.6 × 16.0
GP1UM28YK0VF
0 to 6.0
–10 to +70
4.5 to 5.5 0.6 (0.65) Vcc–0.5
0.45
*3
5.6 × 8.6 ×
12.5(9.6)*2
GP1UM26RK0VF
0 to 6.0
–10 to +70
4.5 to 5.5 0.6 (0.65) Vcc–0.5
0.45
*3
5.6 × 9.6 × 7.2
5.6 × 9.6 × 12.4
5.6 × 9.6 × 16.4
GP1UM27RK0VF
0 to 6.0
–10 to +70
4.5 to 5.5 0.6 (0.65) Vcc–0.5
0.45
*3
GP1UM28RK0VF
0 to 6.0
–10 to +70
4.5 to 5.5 0.6 (0.65) Vcc–0.5
0.45
*3
GP1UM28QK0VF
0 to 6.0
–10 to +70
4.5 to 5.5 0.6 (0.65) Vcc–0.5
0.45
*3
GP1UM29QK0VF
0 to 6.0
–10 to +70
4.5 to 5.5 0.6 (0.65) Vcc–0.5
0.45
*3
GP1UE26XK0VF
0 to 6.0
–10 to +70
2.7 to 5.5
0.4
Vcc–0.5
0.45
*3
5.6 × 9.6 × 6.8
GP1UE27XK0VF
0 to 6.0
–10 to +70
2.7 to 5.5
0.4
Vcc–0.5
0.45
*3
5.6 × 9.6 × 12.0
GP1UE28XK0VF
0 to 6.0
–10 to +70
2.7 to 5.5
0.4
Vcc–0.5
0.45
*3
5.6 × 9.6 × 16.0
GP1UE28YK0VF
0 to 6.0
–10 to +70
2.7 to 5.5
0.4
Vcc–0.5
0.45
*3
5.6 × 8.6 ×
12.5(9.6)*2
GP1UE26RK0VF
0 to 6.0
–10 to +70
2.7 to 5.5
0.4
Vcc–0.5
0.45
*3
5.6 × 9.6 × 7.2
5.6 × 9.6 × 12.4
5.6 × 9.6 × 16.4
5.6 × 9.0 ×
12.5(9.6)*2
5.6 × 16.2 ×
21.9(19)*2
GP1UE27RK0VF
0 to 6.0
–10 to +70
2.7 to 5.5
0.4
Vcc–0.5
0.45
*3
GP1UE28RK0VF
0 to 6.0
–10 to +70
2.7 to 5.5
0.4
Vcc–0.5
0.45
*3
GP1UE28QK0VF
0 to 6.0
–10 to +70
2.7 to 5.5
0.4
Vcc–0.5
0.45
*3
GP1UE29QK0VF
0 to 6.0
–10 to +70
2.7 to 5.5
0.4
Vcc–0.5
0.45
*3
GP1UX51QS
0 to 6.0
–10 to +70
4.5 to 5.5
0.6
Vcc–0.5
0.45
*3
5.5 × 5.3 × 7.5
GP1UX51RK
0 to 6.0
–10 to +70
4.5 to 5.5
0.6
Vcc–0.5
0.45
*3
5.5 × 5.3 × 7.5
5.5 × 5.3 × 7.5
5.5 × 5.3 × 7.5
GP1UX31QS
0 to 6.0
–10 to +70
4.5 to 5.5
0.4
Vcc–0.5
0.45
*3
GP1UX31RK
0 to 6.0
–10 to +70
4.5 to 5.5
0.4
Vcc–0.5
0.45
*3
Terminal
layout
Center
Vcc
5.6 × 9.0 ×
12.5(9.6)*2
5.6 × 16.2 ×
21.9(19)*2
IR Devices
■ IR
IR DETECTING UNITS FOR REMOTE CONTROL
Center
GND
* A voltage regulator circuit is built-in but may be affected by the usage environment. Install with an externally mounted C and R as a power supply filter.
*1 When no signal is input (during input light).
*2 Figures in parentheses indicate the distance to the light detection center.
*3 fo = 32.75/36/36.7/38/40 kHz
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
63
LED
ZENIGATA LEDs FOR LIGHTING
☆ New
■ Mini ZENIGATA
<6W class>
Outline
dimensions
(mm)
15.0 × 12.0
(t = 1.4)
product
ZENIGATA is a registered trademark or a trademark of Sharp Corporation
)
LEDs ( in Japan, the United States and/or other countries.
Model No.
(Tj = 90°C)
Color temperature
(K)
TYP.
Forward voltage
(V)
TYP.
Forward current
(mA)
TYP.
Total luminous flux
(lm)
TYP.
☆GW6BMQ27HD6
2 700
605
☆GW6BMQ30HD6
3 000
645
☆GW6BMQ40HD6
4 000
36.5
160
☆GW6BGQ27HD6
2 700
510
☆GW6BGQ30HD6
3 000
545
15.0 × 12.0
(t = 1.4)
Model No.
Color temperature
(K)
TYP.
☆GW6BMG27HD6
2 700
☆GW6BMG30HD6
3 000
☆GW6BMG40HD6
4 000
Forward voltage
(V)
TYP.
Forward current
(mA)
TYP.
Total luminous flux
(lm)
TYP.
885
34.5
200
2 700
700
☆GW6BGG30HD6
3 000
750
15.0 × 12.0
(t = 1.4)
64
Color temperature
(K)
TYP.
☆GW6BMX27HD6
2 700
☆GW6BMX30HD6
3 000
☆GW6BMX40HD6
4 000
(Tj = 90°C)
Average color
rendering index
Ra
TYP.
Forward voltage
(V)
TYP.
Forward current
(mA)
TYP.
83
925
☆GW6BGG27HD6
Model No.
93
830
<9W class>
Outline
dimensions
(mm)
83
670
<7W class>
Outline
dimensions
(mm)
Average color
rendering index
Ra
TYP.
Total luminous flux
(lm)
TYP.
93
(Tj = 90°C)
Average color
rendering index
Ra
TYP.
1 000
1 070
17.3
500
83
1 115
☆GW6BGX27HD6
2 700
845
☆GW6BGX30HD6
3 000
905
93
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
LED
ZENIGATA LEDs FOR LIGHTING
☆ New
product
<10W class>
Outline
dimensions
(mm)
15.0 × 12.0
(t = 1.4)
Model No.
Color temperature
(K)
TYP.
☆GW6BMW27HD6
2 700
☆GW6BMW30HD6
3 000
☆GW6BMW40HD6
4 000
Forward voltage
(V)
TYP.
Forward current
(mA)
TYP.
Total luminous flux
(lm)
TYP.
(Tj = 90°C)
Average color
rendering index
Ra
TYP.
1 200
1 280
34.5
300
83
1 335
☆GW6BGW27HD6
2 700
1 010
☆GW6BGW30HD6
3 000
1 085
93
Mini ZENIGATA LEDs
<Natural toning type>
15.0 × 12.0
(t = 1.6)
Model No.
☆GW6NGWJCS0C
2 000
31
50
105
3 000
36.5
350
1 000
92
Color temperature
(K)
TYP.
Forward voltage
(V)
TYP.
Forward current
(mA)
TYP.
Total luminous flux
(lm)
TYP.
Mini ZENIGATA LEDs
(Natural toning type)
LEDs
Outline
dimensions
(mm)
(Tj = 25°C)
Average color
rendering index
Ra
TYP.
94
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
65
LED
ZENIGATA LEDs FOR LIGHTING
☆ New
product
ZENIGATA is a registered trademark or a trademark of Sharp Corporation
)
ZENIGATA LEDs ( in Japan, the United States and/or other countries.
<25W class>
■ Mega
Outline
dimensions
(mm)
24.0 × 20.0
(t = 1.45)
Model No.
☆GW6DMC30XF6
☆GW6DGC30XF6
Color temperature
(K)
TYP.
Forward voltage
(V)
TYP.
Forward current
(mA)
TYP.
3 000
34.5
700
Color temperature
(K)
TYP.
Forward voltage
(V)
TYP.
Forward current
(mA)
TYP.
3 000
34.5
950
Total luminous flux
(lm)
TYP.
3 170
83
2 690
93
<35W class>
Outline
dimensions
(mm)
24.0 × 20.0
(t = 1.45)
Model No.
☆GW6DMD30XF6
☆GW6DGD30XF6
(Tj = 90°C)
Average color
rendering index
Ra
TYP.
Total luminous flux
(lm)
TYP.
(Tj = 90°C)
Average color
rendering index
Ra
TYP.
4 190
83
3 560
93
Mega ZENIGATA LEDs
<Natural toning type>
Outline
dimensions
(mm)
24.0 × 20.0
(t = 1.6)
Model No.
☆GW6TGBJC50C
(Tj = 25°C)
Average color
rendering index
Ra
TYP.
Color temperature
(K)
TYP.
Forward voltage
(V)
TYP.
Forward current
(mA)
TYP.
Total luminous flux
(lm)
TYP.
2 000
30.4
80
155
94
3 000
35.8
950
2 860
92
Mega ZENIGATA LEDs
(Natural toning type)
66
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
ZENIGATA LEDs FOR LIGHTING /
LEDs FOR LCD BACKLIGHTS
LED
☆ New product
★ Under development
■ TIGER
ZENI LEDs
Outline
dimensions
(mm)
Model No.
24.0 × 20.0
(t = 1.8)
GW6TGCBG40C
Color temperature
(K)
TYP.
Forward voltage
(V)
TYP.
2 700
37
5 700
38
Forward current
(mA)
TYP.
(Tj = 25°C)
Average color
rendering index
Ra
TYP.
96
Total luminous flux
(lm)
TYP.
1 840
700
2 170
90
TIGER ZENI LEDs
■ LEDs
for Medium- and Small-sized LCD Backlights (High Color Reproduction Models)
Outline
dimensions
(mm)
Model No.
3.0 × 0.84 (t = 0.42)
☆GM4BN4B5S0A
3.0 × 0.85 (t = 0.40)
★GM4BN5B6S0A
3.0 × 0.84 (t = 0.6)
☆GM4BN7B5S0A
3.8 × 1.0 (t = 0.6)
☆GM4BN6D5S0A
Color coordinates
(x, y)
TYP.
Forward voltage
(V)
TYP.
Forward current
(mA)
TYP.
Total luminous flux
(lm)
TYP.
(Tc = 25°C)
Color reproduction
7.3
0.280, 0.270
2.9
20
7.3
8.3
sRGB=120% (CIE1976)*1
8.4
*1 Evaluated using a general LCD panel. Values may differ depending on specific LCD panel characteristics.
■ LEDs
GM4BN5B6S0A
GM4BN7B5S0A
GM4BN6D5S0A
for Large-sized LCD Backlights (High Color Reproduction Models)
Outline
dimensions
(mm)
Model No.
Color coordinates
(x, y)
TYP.
Forward voltage
(V)
TYP.
Forward current
(mA)
TYP.
Total luminous flux
(lm)
TYP.
4.2 × 1.4 (t = 0.8)
GM5FV1ZP10A
0.295, 0.275
3.0
80
26
3.7 × 3.5 (t = 0.8)
GM5F22BH20A
0.251, 0.210
6.51
160
86
7.0 × 2.0 (t = 0.85)
GM5FQ0BH20A
0.266, 0.224
6.11
130
76.5
(Tc = 25°C)
Color reproduction
sRGB=120% (CIE1976)*1
*1 Evaluated using a general LCD panel. Values may differ depending on specific LCD panel characteristics.
GM5FV0AP10A
GM5F22BH20A
LEDs
GM4BN4B5S0A
GM5FQ0BH20A
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
67
LASER
LASER DIODES
☆ New product
★ Under development
■ Laser
Diodes
♦Model
Configurations
• Laser diodes lineup for applications other than optical discs
Package
Wavelength
(nm)
Absolute
maximum
ratings
(mW)*1
Oscillation
transverse
mode *2
SM
ø5.6 mm
Can type
☆GH0631IA2G series
210
SM
★GH0632BA2G
160
SM
185
638 band
ø3.8 mm
Can type
–
ø3.3 mm
Can type
–
1.8 mm t
Frame type
–
1.2 mm t
Frame type
–
–
–
–
–
–
★GH0631GA5G series
–
–
–
★GH163xxxUK series
7 / 10
SM
–
–
–
–
642 band
150
SM
GH0641FA2G series
–
–
–
–
650 band
220
SM
★GH0652CA2G series
–
–
–
–
10
SM
–
–
660 band
100
SM
–
–
100
SM
GH06P25A2C
–
–
–
–
750 band
700
MM
★GH0752WA2G
–
–
–
–
GH07825D2K
–
785 band
2ch
830 band
850 band
940 band
25
SM
155
SM
–
–
25
SM
GH3S225D2B
–
210
SM
☆GH0832BA2 series
–
700
MM
★GH0832WA2G
–
700
MM
★GH0852WA2G
–
285
MM
☆GH0942IA2CC
–
500
MM
★GH0942WA2G
–
GH06510F4A
–
–
–
★GH16P32B8C
–
GH07P28F4C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
★GH0832BA4C
*1 The absolute maximum ratings are the limits that are not to be exceeded under any condition whatsoever, whether in testing or in actual use.
*2 SM: Single Mode
MM: Multi Mode
• Eye safety LASER
Package
Wavelength
(nm)
Absolute maximum
ratings
(mW)*1
Oscillation
transverse mode *2
ø5.6 mm
Eye-safe type
750 band
830 band
850 band
940 band
700
MM
200
MM
700
MM
200
MM
700
MM
200
MM
500
MM
200
MM
★ GH4757AxTG
☆ GH4837AxTG
★ GH4857AxTG
★GH4945AxTG
3.5 × 3.5 mm
Eye-safe SMD type
series
★ GH4757AxAS
series
–
★ GH4752AxAS
series
series
★ GH4837AxAS
series
–
★ GH4832AxAS
series
series
★ GH4857AxAS
series
–
★ GH4852AxAS
series
series
★ GH4945AxAS
series
–
★ GH4942AxAS
series
*1 The absolute maximum ratings are the limits that are not to be exceeded under any condition whatsoever, whether in testing or in actual use.
*2 SM: Single Mode
MM: Multi Mode
68
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
LASER
LASER DIODES
• Laser diodes lineup for optical disc use *2
Package
Wavelength
(nm)
Absolute maximum ratings (mW)*1
CW
(Continuous wave)
Dualwavelength
Pulse
660 band
90
320
785 band
160
350
660 band
6.3
–
785 band
5.7
–
4.3
–
785 band
1.8 mm t
Frame type
4.8 mm t
Can type
4.8 mm t
Frame type
GH33235A8C
–
–
–
GH90505 series
–
–
–
GH6CD05 series
Laser Diodes
*1 The absolute maximum ratings are the limits that are not to be exceeded under any condition whatsoever, whether in testing or in actual use.
*2 New models for optical disc use are introduced frequently, and it is possible the model you wish to order may no longer be in production.
Sample sales may not be available, either. We ask for your understanding in this matter.
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
69
LASER
LASER DIODES
☆ New product
★ Under development
♦ Specifications
•Laser diodes lineup for applications other than optical discs
Model No.
Wavelength
(nm)
Absolute maximum
ratings*1 (mW)
25°C, CW
(continuous wave)
Operating
temperature
(°C)
Package size
(Tc = 25°C)
Built-in
monitor PD
Eye-safe
laser
Terminal
connections
☆ GH0631IA2G series
185
–10 to +65
ø5.6mmCAN
－
－
9
★ GH0632BA2G series
210
–40 to +85
ø5.6mmCAN
－
－
9
160
–10 to +60
ø3.8mmCAN
－
－
8
★ GH0631GA5G series
638 band
Applications
Display, etc.
7 / 10
–10 to +50
1.2 mm frame
○
－
10
GH0641FA2G series
642 band
155
–10 to +60
ø5.6mmCAN
－
－
8
Display, etc.
★ GH0652CA2G series
650 band
220
–40 to +90
ø5.6mmCAN
－
－
9
Display, etc.
10
–10 to +70
ø3.3 mm CAN
○
－
1
Bar code reader,
laser displacement gauge, etc.
–10 to +70
1.8 mm frame
－
－
6
–10 to +70
ø5.6 mm CAN
－
－
3
－
－
8
－
○
8
－
○
11
★GH163xxxUK series
GH06510F4A
★ GH16P32B8C
660 band
100
GH06P25A2C
★ GH0752WA2G
★ GH4757AxTG series
★ GH4757AxAS series
–10 to +70
750 band
★GH4752AxAS series
GH07825D2K
GH07P28F4C
785 band
GH3S225D2B
700
tbd to +70
tbd to +70
－
○
11
ø5.6 mm CAN
○
－
4
Printer, copier, MFP
155
–10 to +70
ø3.3 mm CAN
－
－
3
Various types of sensors, etc.
25 × 2
–10 to +60
ø5.6 mm CAN
○
－
5
Printer, copier, MFP
－
－
3
○
－
4
－
－
3
－
－
8
－
○
8
－
○
11
－
○
11
－
－
8
－
○
8
－
○
11
－
○
11
－
－
3
－
－
8
tbd to +70
－
○
8
tbd to +70
－
○
11
－
○
11
★GH0832BA4C
–10 to +70
830 band
700
★ GH4837AxAS series
★ GH4857AxAS series
tbd to +70
tbd to +70
200
★ GH0852WA2G
★ GH4857AxTG series
–10 to +70
–10 to +70
★ GH4832AxAS series
tbd to +70
–10 to +70
850 band
700
tbd to +70
tbd to +70
★ GH4852AxAS series
200
tbd to +70
☆ GH0942IA2CC
285
–10 to +65
★ GH0942WA2G
★ GH4945AxTG series
–10 to +70
940 band
500
★ GH4945AxAS series
★ GH4942AxAS series
Various types of sensors, etc.
–10 to +60
210
☆ GH4837AxTG series
3.5 × 3.5 mm SMD
25
–10 to +70
☆GH0832BA2K
ø5.6 mm CAN
200
☆GH0832BA2C
★GH0832WA2G
tbd to +70
Display, etc.
200
tbd to +70
ø5.6 mm CAN
ø3.3 mm CAN
ø5.6 mm CAN
3.5 × 3.5 mm SMD
ø5.6 mm CAN
3.5 × 3.5 mm SMD
ø5.6 mm CAN
3.5 × 3.5 mm SMD
Various types of sensors, etc.
Various types of sensors, etc.
Various types of sensors, etc.
*1 The absolute maximum ratings are the limits that are not to be exceeded under any condition whatsoever, whether in testing or in actual use.
70
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
LASER
LASER DIODES
•Laser diodes lineup for optical disc use *2
Wavelength
(nm)
Model No.
Absolute maximum
ratings*1 (mW)
CW (ContinPulse
uous wave)
660 band
90
320
785 band
160
350
660 band
6.3
–
785 band
5.7
–
GH6CD05 series 785 band
4.3
–
Operating
Built-in
temperature Package size
monitor PD
(°C)
GH33235A8C
GH90505 series
(Tc = 25°C)
Eye-safe
laser
Terminal
connections
–10 to +80
(pulse drive)
1.8 mm frame
–
–
7
–10 to +80
4.8 mm CAN
○
–
–
–10 to +80
4.8 mm frame
○
–
–
Applications
Double-layer DVD 8× to 16×
recording
CD-R/RW (MAX. 48× to 52×
recording)
DVD players
CD players
CD players
*1 The absolute maximum ratings are the limits that are not to be exceeded under any condition whatsoever, whether in testing or in actual use. For recommended optical
power output, consult the specification sheet or data sheet for each model.
*2 New models for optical disc use are introduced frequently, and it is possible the model you wish to order may no longer be in production.
Sample sales may not be available, either. We ask for your understanding in this matter.
•Terminal Connections
2
2 CASE
3
2 CASE
Photodiode
Laser diode
Photodiode
Laser diode
3
1
3
1
5
6
2 CASE
4
1
1
9
4
1
1
3
1
8
2 CASE
4
Laser diode
2
3
1
11
3 CASE
2
Laser diode
3 CASE
1
2
10
Laser diode
Photodiode
Laser diode Laser diode
(CD)
(DVD)
Laser diode
Laser diode Photodiode Laser diode
3
7
2 CASE
Laser diode
3
3 CASE
4
2 CASE
1
Photodiode Laser diode
1
4
Laser diode
2
Laser Diodes
1
2
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
71
RF
■ Europe:
EUROPE: LNBs FOR SATELLITE BROADCAST
LNBs for Satellite Broadcast
♦ Features
(1) Wide band type receiving all broadcasting channels (analog & digital) in Europe. [Universal LNB]
(2) Originally developed feed-horn waveguide makes the wide-band, low-noise characteristics possible.
(3) One of the industry’s most compact and lightweight package.
(4) Low dissipation current design for energy saving. [95 mA (TYP.): BS1K2EL100A]
♦ Specifications
Destination
Europe, Astra/Eutelsat Satellite etc.
Receiving polarization
Model No.
<Type>
Input frequency (GHz)
Horizontal/Vertical polarization
BS1K2EL400A
BS1K2EL200A
<4-output>
<2-output>
10.7 to 11.7 [Low band], 11.7 to 12.75 [High band]
BS1K1EL500A
<4-output>
Output frequency (MHz)
950 to 1 950 [Low band], 1 100 to 2 150 [High band]
Local oscillation frequency (GHz)
9.75 [Low band], 10.6 [High band]
NF (dB)
0.4 (TYP.)
Conversion gain (dB)
56 (TYP.)
Phase noise (dBc/Hz)
–55 (TYP.) at 1 kHz
–80 (TYP.) at 1 kHz
25 (TYP.)
Supply voltage (V DC) Vertical polarization
(Polarization switching) Horizontal polarization
Dissipation current (mA)
0.3 (TYP.)
58 (TYP.)
Cross-polar discrimination (dB)
11.5 to 14.0 (0/22 kHz)
16.0 to 19.0 (0/22 kHz)
200 (TYP.)/250 (MAX.)
Waveguide
135 (TYP.)/300 (MAX.)
200 (TYP.)/250 (MAX.)
95 (TYP.)/120 (MAX.)
Feed-horn (F/D = 0.6)
Output impedance (Ω)
Output connector (F-type)
Outline dimensions (W) × (D) × (H) (mm)
Weight (g)
4-output
(H/H, H/L, V/H, V/L)
150 × 70 × 60
Approx. 190
BS1K1EL500A
72
BS1K2EL100A
<1-output>
BS1K2EL400A
75
2-output
1-output
4-output
(H/V, High and low switching) (H/V, High and low switching) (H/V, High and low switching)
159 × 70 × 60
153 × 60 × 60
101 × 60 × 60
Approx. 200
Approx. 145
Approx. 75
BS1K2EL200A
BS1K2EL100A
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
RF
■ Digital
DIGITAL DBS FRONT-END UNITS
DBS Front-End Units
♦ Features
(1) Equipped with a high-performance direct conversion IC. Reliability is improved by reducing power consumption and component
counts.
(2) Wide-band reception design also covering CS broadcast band. [Input frequency: 950 to 2 150 MHz]
(3) User support tools can be provided. [Sample/evaluation boards and software are available.]
♦ Standard
Specifications <IQ output type>
Destination
Global (ISDB-S/DVB-S2/ABS-S)
Input type
1-input/1-loop through output
1-input
Model No.
BS2S7VZ7D03
BS2S7VZ6D02
Input frequency (MHz)
950 to 2 150
Input signal level (dBm)
–65 to –25
Base band frequency bandwidth (MHz)
5 to 40, 2 MHz step (BB LPF)
RF input local leak (dBm)
–68 and below
Output type
I/Q
Noise figure (dB)
6 (TYP.)
Phase noise (dBc/Hz)
–88 (TYP.) at 10 kHz offset
Supply voltage (V DC)
3.3
LNB power supply
DC 25 V, 400 mA (MAX.)
Input impedance (Ω)
Outline dimensions (mm)
75
30.4 (W) × 29.4 (D) × 12.9 (H)
25.2 (W) × 17.4 (D) × 8.7 (H)
※ Low-profile type is also available.
BS2S7VZ6D02
RF Components
BS2S7VZ7D03
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
73
FRONT-END UNITS FOR ISDB-T/S /
FRONT-END UNITS FOR DVB-T2/DTMB
RF
■ Front-End
Units for ISDB-T/S
♦ Features
(1) Low phase noise characteristics, high elimination of adjacent channel interference.
(2) Compact, low power consumption.
♦ Standard
Specifications
Destination
Japan (ISDB-T/S)
Model No.
VA4S5JD2358
Digital terrestrial
Number of tuners
Input frequency (MHz)
Output type
Noise figure (dB)
Phase noise (dBc/Hz)
Supply voltage (V DC)
Power consumption (W)
VA4S6JD2359
Digital satellite
Digital terrestrial
Digital satellite
VA4S7JD2371
Digital terrestrial
Digital satellite
1
1
2
2
3
3
93 to 767
950 to 2 150
93 to 767
950 to 2 150
93 to 767
950 to 2 150
DIF
I,Q
DIF
I,Q
DIF
I,Q
4 (TYP.)
–87 (TYP.)
at 10 kHz offset
1.8, 3.3, 5
5 (TYP.)
–85 (TYP.)
at 10 kHz offset
3.3
4 (TYP.)
–87 (TYP.)
at 10 kHz offset
1.8, 3.3, 5
5 (TYP.)
–85 (TYP.)
at 10 kHz offset
3.3
4 (TYP.)
–87 (TYP.)
at 10 kHz offset
1.8, 3.3, 5
5 (TYP.)
–85 (TYP.)
at 10 kHz offset
3.3
0.9
0.7
1.4
1.2
1.9
1.8
Outline dimensions (mm)
41 (W) × 34 (D) × 8.75 (H)
VA4S7JD2371
（VA4S5JD2358, VA4S6JD2359）
■ Front-End
Units for DVB-T2/DTMB
♦ Features
(1) Low phase noise characteristics, high elimination of adjacent channel interference.
(2) Compact, low power consumption.
(3) Other types are available with various chassis forms (vertical or horizontal type) and input connectors (F or DIN type), etc.
♦ Standard
Specifications
Destination
Model No.
Europe/Asia (DVB-T2), China (DTMB)
VA4M1DX2331
Input frequency (MHz)
Output type
VA4M1DX2323
VA4M2DX2194
DIF (Off through)
DIF (Dual output)
51 to 868
DIF
47 to 868
Noise figure (dB)
5 (TYP.)
Phase noise (dBc/Hz)
–90
Supply voltage (V DC)
3.3, 1.8
0.49
1.13
Outline dimensions (mm)
24.2 (W) × 25.8 (D) × 8 (H)
41.3 (W) × 37.5 (D) × 12.3 (H)
VA4M1DX2331
74
5, 3.3, 1.8
Power consumption (W)
VA4M2DX2194
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
FRONT-END UNITS FOR DIGITAL TERRESTRIAL AND
ANALOG TERRESTRIAL BROADCASTING
RF
■ Front-End
Units for Digital Terrestrial and Analog Terrestrial Broadcasting
♦ Features
Contributing to the development of thinner LCD TVs and similar products by combining compatibility with digital and analog terrestrial
broadcasts into a single unit.
♦ Standard
Specifications
Destination
Brazil
China*1
Model No.
VA4M1BC1228
VA4M1CA1309
Input frequency (MHz)
47 to 866
Output type
IF
Digital IF bandwidth (MHz)
6
8
Phase noise (dBc/Hz)
–90 (TYP.) at 10 kHz offset
Supply voltage (V DC)
3.3
Noise figure (dB)
4 (TYP.)
PLL (I2C-bus)*2
Channel selection system
Outline dimensions (W) × (D) × (H) (mm)
30 × 28 × 7.5
26.2 × 20 × 10.6
*1 Built-in isolator type
*2 I2C-bus is a trademark of Philips Corporation.
VA4M1BC1228
VA4M1CA1309
♦ Features
Universal specifications compatible with various broadcasting systems all over the world.
Digital: DVB-T/T2, DVB-C, ATSC, ISDB-T, DTMB
Analog: NTSC-M/N, PAL-B/G/I/DK, SECAM-L, L’
Specifications
Destination
Global
Model No.
VA4M1DB1370
Input frequency (MHz)
47 to 868
Output type
IF
Noise figure (dB)
4 (TYP.)
Phase noise (dBc/Hz)
–90 (TYP.)
Supply voltage (V)
3.3
Outline dimensions (W) × (D) × (H) (mm)
27 × 14 × 7.5
VA4M1DB1370
RF Components
♦ Standard
※ Contact SHARP for custom design product.
(For connector shape or facing side, analog output format, etc.)
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
75
RF
■
TUNER MODULE FOR MULTIMEDIA BROADCAST RECEPTION
Tuner Module for Multimedia Broadcast Reception
♦Features
(1) Compact and thin design: 6.7 × 6.7 × 1.0 mm
(2) Capable of receiving digital terrestrial broadcasts such as One-seg or Full-seg.
(3) Output interface: TS or SPI output
VA3D5JZ714
♦ Standard
Specifications
Destination
Japan
Model No.
VA3D5JZ714
90 to 108
207.5 to 222
470 to 710
1.1, 1.8, I/O: 1.8
80 (When receiving One-seg broadcasting)
135 (When receiving V-High multimedia broadcasting)
145 (When receiving Full-seg broadcasting)
–20 to +65
Input frequency (MHz)
Supply voltage (V)
Power consumption (mW)
Operating temperature range (°C)
Control I/F
Outline dimensions (mm)
I2C-bus*1
6.7 × 6.7 × 1.0
*1 I2C-bus is a trademark of Philips Corporation.
76
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
ONE-SEG TUNER MODULE /
DIGITAL TERRESTRIAL FRONT-END UNIT WITH EWBS
RF
EWBS: Emergency Warning Broadcasting System
■ One-Seg
Tuner Module
♦Features
(1) High sensitivity:
(2) Compact and thin design:
(3) Low power consumption:
(4) Output interface:
-100 dBm (13 seg, QPSK CR: 2/3)
5.4 × 5.4 × 1.0 mm
41 mW (with software power control)
TS serial output
VA3A5JZ967
♦ Standard
Specifications
Destination
Japan
Model No.
VA3A5JZ967
Input frequency (MHz)
470 to 770 (UHF: 13 to 62)
Input signal level (dBm)
–100 (13 seg, QPSK CR: 2/3)
1.2 (RF)
1.2 (OFDM Core)
1.62 to 3.6 (I/O)
41 (TYP.)
Supply voltage (V DC)
Power consumption (mW)
Operating temperature range (°C)
–20 to +65
I2C-bus*1
Control I/F
Outline dimensions (mm)
5.4 (W) × 5.4 (D) × 1.0 (H)
*1 I2C-bus is a trademark of Philips Corporation.
■
Digital Terrestrial Front-End Unit with EWBS
♦Features
VA4M1FB0337
♦ Standard
Specifications
Product name
Digital terrestrial front-end unit with EWBS
Destination
Japan/Global (common)
Model No.
VA4M1FB0337
Reception bandwidth (MHz)
Reception frequency range (MHz)
Standby power consumption (mW)
Communication system
Power supply (V)
Outline dimensions (mm)
6/7/8
Full-seg tuner: (54 to 864),
EWBS module: UHF (470 to 862)
Full-seg tuner: 690 (TYP.),
EWBS: 63 (TYP.)
I2C
RF Components
(1) Reduced power consumption with use of One-seg broadcasting system
(2) Compact size for simple assembly
Full-seg tuner: 3.3,
EWBS: 3.3, 1.2
34 × 40.5 × 7.8
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
77
Sensor
NON-CONTACT VITAL & MOTION SENSOR MODULE /
IONIZING RADIATION SENSOR MODULE
☆ New
■ Non-contact
product
Vital & Motion Sensor Module
♦Features
(1) Measures heart and breathing rate without contact using the Doppler effect.
(2) The module can be embedded in products as sensing is possible through obstructions
(except in cases where the obstructions are metal or metal plated).
(3) Enables stable measurement without being affected by factors such as temperature,
direct sunlight, or reflector color.
DC6M4JN3000
♦Standard
Specifications
☆DC6M4JN3000
Model No.
Output frequency (GHz)
24.05 to 24.5
Output interface
UART interface (baud rate: 115 200; data bit length: 8 bits)
Applications
Heart rate / Breathing rate / Body motion
Measurable distance (m)
MAX. 1 (heart rate and breathing rate)
Antenna
Planar antenna with 8 patch Tx / Rx antenna elements
Antenna pattern (deg.)
30 (azimuth), 26 (elevation)
Power supply (V)
3.3
Dissipation current (mA)
100 (including signal processing)
RF module: 31 × 47.5 × 14.5
Signal processer: 30.0 × 46.5 × 5.0
Outline dimensions (W)×(D)×(H) (mm)
■ Ionizing
Radiation Sensor Module
♦Features
(1) Low-noise amplifier to efficiently amplify weak currents
(2) Built-in circuit to eliminate noise caused by vibration and shock
(3) Compact module size thanks to a newly developed dedicated IC
(25 × 20 × 2.5 mm)
(4) Low power consumption (7.5 mW at normal operation)
QM1H0M0058
♦Standard
Specifications
Model No.
Object to be detected
Measuring range (µSv/h)
0.05 to 20
Output interface
I2C output
Power supply voltage
78
QM1H0M0058
Gamma ray (γ-ray) (Detector: PIN photodiode)
DC 5 V (Photodiode), 2.75 V (Analog), 1.8 V (Digital)
Power consumption (mW)
7.5 (at normal operation)
Outline dimensions (mm)
25 × 20 × 2.5
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
PM2.5 SENSOR MODULE /
TEMPERATURE AND HUMIDITY SENSOR
Sensor
☆ New
■ PM2.5
product
Sensor Module
♦Features
(1) Easy assembly for use in air purifiers and other products
thanks to small size of 53 × 40 × 51 mm
(2) Industry’s shortest*1 detection time of 10 seconds
(3) Digital output model is also part of line-up
*1: As of May 1, 2015 (measured by Sharp)
Analog output type: DN7C3CA006 / 007
Digital output type: DN7C3CD015
♦Standard
Specifications
☆DN7C3CD015
[Japan / Overseas]
DN7C3CA006 / 007
[Overseas]
Model No.
Measuring range (μg/m3)
25 to 500
25 to 500
Output type
Analog voltage
Digital PWM
Power supply voltage (Vcc/fan)
DC5 V / DC5 V
DC5 V / DC5 V
At sensor: 55,
At fan: 700 [JA001, CA006]
450 [CA007]
At sensor: 75,
At fan: 450
0 to 3.4 (MIN.)
Vhigh: Vcc-1.5 (MIN.),
Vlow: 1.3 (MAX.)
Power consumption (mW) (TYP.)
Output voltage range (V)
Operating temperature range (°C)
Outline dimensions (mm)
■ Temperature
–10 to +60
–10 to +60
53.0 × 40.0 × 51.0 (excluding protruding parts)
53.0 × 40.0 × 51.0 (excluding protruding parts)
and Humidity Sensor
♦Features
(1) Package: 3.0 x 3.0 x 0.8 mm, reflowable, QFN
(2) High-speed response: Approx. 7 sec.*1
(3) Interface: I2C
QM1H0P0073
♦Standard
Specifications
Humidity sensor
Temperature sensor
Macromolecule capacity
Semiconductor
0 to 100% RH
–20 to +85°C
Accuracy
±2% RH (25°C)
±0.3°C
Resolution
0.01% RH
Type
Measuring range
Interface
SENSOR
*1: For 63% of humidity change
0.02°C
I2C
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
79
Sensor
■ Barometer
BAROMETER SENSOR
Sensor
♦Features
(1) High sensitive detection: ±0.08 hPa (relative accuracy)
(2) Wide measurement range: 300 to 1 100 hPa
(3) Ultra small, thin SMT package: 2.78 × 2.23 × 0.70 mm
(4) Low power consumption: 750 μA at measurement, 1 μA at idle
QM1H0P0075
♦Standard
Specifications
Model No.
Pressure range (hPa)
300 to 1 100
Absolute accuracy (hPa)
±3
Relative accuracy (hPa)
±0.08
Supply voltage
Dissipation current (μA)
Interface
Operating temperature range (°C)
Outline dimensions (mm)
80
QM1H0P0075
DC1.7 to 3.6 V
750 (at measurement), 1 (at idle)
I2C, SPI
–20 to +85
2.78 × 2.23 × 0.70
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment
using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets
before using any SHARP device.
INDEX
INDEX
GH4942AxAS series........................68/70
GP1A204HCS0....................................51
GP1UE28RK0VF..................................63
BS
GH4945AxAS series........................68/70
GP1A273LCS1F...................................49
GP1UE28XK0VF..................................63
BS1K1EL500A .....................................72
GH4945AxTG series.......................68/70
GP1A396HCP0F..................................48
GP1UE28YK0VF..................................63
BS1K2EL100A .....................................72
GH0832BA2 series...............................68
GP1A396HCPSF..................................48
GP1UE29QK0VF..................................63
BS1K2EL200A .....................................72
GH0832BA2C..................................68/70
GP1A50HRJ00F...................................48
GP1UM26RK0VF.................................63
BS1K2EL400A .....................................72
GH0832BA4C..................................68/70
GP1A51HRJ00F...................................48
GP1UM26XK0VF.................................63
BS2S7VZ6D02.....................................73
GH0832WA2G.................................68/70
GP1A52HRJ00F...................................48
GP1UM27RK0VF.................................63
BS2S7VZ7D03.....................................73
GH0852WA2G.................................68/70
GP1A52LRJ00F...................................48
GP1UM27XK0VF.................................63
GH0942IA2CC.................................68/70
GP1A53HRJ00F...................................48
GP1UM28QK0VF.................................63
DC
GH0942WA2G.................................68/70
GP1A57HRJ00F...................................48
GP1UM28RK0VF.................................63
DC6M4JN3000.....................................78
GH16P32B8C..................................68/70
GP1A58HRJ00F...................................48
GP1UM28XK0VF.................................63
GH163xxxUK series........................68/70
GP1A98HCPSF....................................48
GP1UM28YK0VF.................................63
DN
GH3S225D2B..................................68/70
GP1A98HCZ0F....................................48
GP1UM29QK0VF.................................63
DN7C3CA006.......................................79
GH6CD05 series.............................69/70
GP1S092HCPIF...................................46
GP1UX31QS........................................63
DN7C3CA007.......................................79
GH90505 series...............................69/70
GP1S093HCZ0F..................................46
GP1UX31RK........................................63
DN7C3CD015.......................................79
GH33235A8C..................................69/71
GP1S094HCZ0F..................................46
GP1UX51QS........................................63
GH0832BA2K.......................................70
GP1S097HCZ0F..................................46
GP1UX51RK........................................63
GA
GP1S173LCS2F...................................47
GL
GP1S194HCZ0F..................................46
GP2
GL100MD1MP1....................................57
GP1S195HCPSF..................................46
GP2A200LCS0F...................................50
GH
GL100MN0MP......................................57
GP1S195HCZSF..................................46
GP2A230LRS0F...................................50
GH0631GA5G series.......................68/70
GL100MN1MP......................................57
GP1S196HCPSF..................................46
GP2A230LRSAF..................................50
GH0632BA2G..................................68/70
GL4800E0000F....................................57
GP1S196HCZ0F..................................46
GP2A240LCS0F...................................50
GH0631IA2G series........................68/70
GL480E00000F....................................57
GP1S196HCZSF..................................46
GP2A250LCS0F...................................50
GP1S273LCS1F...................................47
GP2A25DJ000F...................................50
GA1AUV100WP...................................53
GH0641FA2G series.......................68/70
GH06510F4A...................................68/70
GM4
GP1S296HCPSF..................................46
GP2A25J0000F....................................50
GH06P25A2C..................................68/70
GM4BN4B5S0A....................................67
GP1S396HCP0F..................................46
GP2A25NJJ00F....................................50
GH0752WA2G.................................68/70
GM4BN5B6S0A....................................67
GP1S396HCPSF..................................46
GP2A28AJ000F....................................50
GH07825D2K..................................68/70
GM4BN6D5S0A...................................67
GP1S50J0000F....................................47
GP2A430LCSAF..................................50
GH07P28F4C..................................68/70
GM4BN7B5S0A....................................67
GP1S51VJ000F....................................47
GP2AP002S30F...................................52
GH0652CA2G series.......................68/70
GP1S52VJ000F....................................47
GP2AP007A00F...................................52
GH4752AxAS series........................68/70
GM5
GP1S53VJ000F....................................47
GP2AP008T00F...................................52
GH4757AxAS series........................68/70
GM5F22BH20A....................................67
GP1S56TJ000F....................................47
GP2AP030A00F...................................52
GH4757AxTG series.......................68/70
GM5FQ0BH20A...................................67
GP1S58VJ000F....................................47
GP2AP054A00F...................................53
GH4832AxAS series........................68/70
GM5FV1ZP10A....................................67
GP1S59J0000F....................................47
GP2S60................................................49
GP1UE26RK0VF..................................63
GP2S700HCP......................................49
GH4837AxAS series........................68/70
GH4837AxTG series.......................68/70
GP1
GP1UE26XK0VF..................................63
GP2Y0A02YK0F...................................60
GH4852AxAS series........................68/70
GP1A173LCS2F...................................49
GP1UE27RK0VF..................................63
GP2Y0A21YK0F...................................60
GH4857AxAS series........................68/70
GP1A173LCS3F...................................49
GP1UE27XK0VF..................................63
GP2Y0A41SK0F...................................60
GH4857AxTG series.......................68/70
GP1A173LCSVF..................................49
GP1UE28QK0VF..................................63
GP2Y0A51SK0F...................................60
81
INDEX
INDEX
GP2Y0A60SZLF...................................60
GW6DGD30XF6...................................66
LQ070Y3LG01........................................2
GP2Y0A710K0F...................................60
GW6DMC30XF6...................................66
LQ070Y3LW01.......................................2
LQ2
GP2Y0AF15 series...............................60
GW6DMD30XF6...................................66
LQ084S3LG03........................................2
LQ201U1LW31.......................................4
GP2Y0AF30 series...............................60
GW6NGWJCS0C.................................65
LQ084V1DG43.......................................2
LQ201U1LW32.......................................4
GP2Y0D02YK0F..................................59
GW6TGBJC50C...................................66
LQ085Y3DG18.......................................2
LQ231U1LW32.......................................4
GP2Y0D21YK0F..................................59
GW6TGCBG40C..................................67
LQ091B1LW01.......................................2
LQ3
GP2Y0D413K0F...................................59
GP2Y0D805Z0F...................................59
IR2
LQ1
GP2Y0D810Z0F...................................59
IR2E58U...............................................20
LQ101K1LY05........................................2
GP2Y0D815Z0F...................................59
IR2E67M...............................................20
LQ101W3LG01.......................................2
LQ6
GP2Y0E02A.........................................60
IR2E70N...............................................20
LQ104S1DG2C......................................2
LQ695D1VG03.......................................5
GP2Y0E02B.........................................60
IR2E71Y...............................................20
LQ104S1LG81........................................2
LQ695D1VG04.......................................5
LQ104V1DG81.......................................2
LQ695D3LG03.......................................5
GP2Y0E03............................................60
GP2Y1010AU0F...................................61
IR3
LQ104V1LG81........................................2
LQ695D3LG06.......................................5
GP2Y1012AU0F...................................61
IR3M92N4............................................21
LQ121K1LG52........................................3
LQ695D3LG07.......................................5
LQ121K1LG54........................................3
GP2Y1023AU0F...................................61
GP2Y1030AU0F...................................61
IRM
LQ121S1DC71.......................................3
LQ9
IRM053U7............................................21
LQ121S1DG81.......................................3
LQ900D3LA01........................................5
GW6
IRM067U6............................................21
LQ121S1LG84........................................3
LQ900D3LA03........................................5
GW6BGG27HD6..................................64
IRM068U7............................................21
LQ121S1LG86........................................3
GW6BGG30HD6..................................64
LQ121X3LG02........................................3
LR0
GW6BGQ27HD6..................................64
IS
LQ150X1LG11........................................3
LR0G964..............................................15
GW6BGQ30HD6..................................64
IS471FE................................................54
LQ150X1LG91........................................3
LR0G967..............................................15
GW6BGW27HD6..................................65
IS485E..................................................54
LQ150X1LG96........................................3
LR0G969..............................................15
GW6BGW30HD6..................................65
IS486E..................................................54
LQ150X1LW12.......................................3
GW6BGX27HD6...................................64
LQ150X1LW94.......................................3
LR3
GW6BGX30HD6...................................64
LK
LQ150X1LW95.......................................3
LR36B16...............................................12
GW6BMG27HD6..................................64
LK800D3LA28........................................5
LQ150X1LW96.......................................3
LR388K4...............................................15
GW6BMG30HD6..................................64
LK800D3LA38........................................5
LQ150X1LX92........................................3
LR388K5...............................................15
GW6BMG40HD6..................................64
LK800D3LA48........................................5
LQ150X1LX95........................................3
GW6BMQ27HD6..................................64
82
LQ315D1JG93........................................5
LQ150X1LX96........................................3
LS
GW6BMQ30HD6..................................64
LQ0
LQ156M1LG21.......................................4
LS010B7DH01........................................6
GW6BMQ40HD6..................................64
LQ035Q3DG03.......................................2
LQ156M3LW01......................................4
LS010B7DH05........................................6
GW6BMW27HD6.................................65
LQ035Q3DY01.......................................2
LQ156T3LW03.......................................3
LS012B4DG01.......................................6
GW6BMW30HD6.................................65
LQ042T1DW01.......................................2
LQ185M3LW01......................................4
LS012B7DH02........................................6
GW6BMW40HD6.................................65
LQ043T1DG28.......................................2
LQ190E1LW52.......................................4
LS013B7DH03........................................6
GW6BMX27HD6..................................64
LQ043T1DG29.......................................2
LQ190E1LW72.......................................4
LS013B7DH05........................................6
GW6BMX30HD6..................................64
LQ043Y1DY01.......................................2
LQ190E1LX75........................................4
LS013B7DH06........................................6
GW6BMX40HD6..................................64
LQ057Q3DC03.......................................2
LQ190E1LX75T......................................4
LS027B7DH01........................................6
GW6DGC30XF6...................................66
LQ064V3DG06.......................................2
LQ190N1LW01.......................................4
LS037V7DW05.......................................2
INDEX
INDEX
LS037V7DW06.......................................2
LS044Q7DH01.......................................6
PQ070XNA1ZPH..................................17
PC4
PQ070XNA2ZPH..................................17
PR
PC400J00000F.....................................38
PQ070XNAHZPH.................................17
PR22MA11NTZF..................................44
PC1
PC451J00000F.....................................34
PQ070XNB1ZPH..................................17
PR31MA11NTZF..................................44
PC1231xNSZ0X...................................36
PC452J00000F.....................................34
PC123XNNSZ0F..................................36
PC457L0NIP0F....................................38
PQ1
PR33MF51NSLF..................................44
PR32MA11NTZF..................................44
PC4SD11NTZCF..................................41
PQ1CG2032FZH..................................19
PR33MF52NSLF..................................44
PC2
PC4SD21NTZCF..................................42
PQ1CG21H2FZH.................................19
PR36MF12NSZF..................................44
PC2SD11NTZAF..................................41
PC4SD21NTZDF..................................42
PQ1CG3032FZH..................................19
PR36MF21NSZF..................................44
PC4SF11YTZBF...................................41
PQ1CG41H2FZH.................................19
PR36MF22NSZF..................................44
PC3
PC4SF21YVZBF..................................42
PQ1CN38M2ZPH.................................18
PR36MF51NSLF..................................44
PC354NJ0000F....................................34
PC4SF21YWPSF.................................42
PQ1CN41H2ZPH.................................18
PR39MF22NSZF..................................44
PQ1CX41H2ZPQ.................................18
PR39MF51NSLF..................................44
PC355NJ0000F....................................34
PC357NJ0000F....................................34
PC7
PQ1CX53H2MPQ.................................18
PR3BMF51NSLF..................................44
PC364NJ0000F....................................34
PC713V0NSZXF..................................37
PQ1CX61H1ZPQ.................................18
PR3BMF52NSZF..................................44
PC365NJ0000F....................................34
PC715V0NSZXF..................................37
PQ1DX095MZPQ.................................18
PC367NJ0000F....................................34
PC725V0NSZXF..................................37
PQ1LAX95MSPQ.................................16
PT
PQ1LAxx5MSPQ..................................16
PT100MC0MP......................................55
PC3H3J00000F....................................35
PC3H41xNIP0F....................................35
PC8
PT100MF0MP......................................55
PC3H4J00000F....................................35
PC815XNNSZ0F..................................36
PQ2
PC3H510NIP0F....................................35
PC8171xNSZ0X...................................36
PQ200WN3MZPH................................17
PT4800E0000F....................................55
PC3H5J00000F....................................35
PC817XNNSZ0F..................................36
PQ200WNA1ZPH.................................17
PT4800FE000F....................................55
PC3H71xNIP0F....................................35
PC851XNNSZ0F..................................36
PC3H7J00000F....................................35
PC852XNNSZ0F..................................36
PC3HU7xYIP0B...................................35
PT100MF1MP......................................55
PT480E00000F....................................55
PQ3
PT480FE0000F....................................55
PQ30RV11J00H...................................16
PT481E00000F....................................55
PC3SD11NTZCF..................................41
PC9
PQ30RV21J00H...................................16
PT481FE0000F....................................55
PC3SD11YTZCF..................................41
PC900V0NSZXF..................................39
PQ30RV31J00H...................................16
PT4850FE000F....................................55
PC3SD12NTZAF..................................41
PC925LENSZ0F...................................39
PT491FE0000F....................................55
PQ6
PC3SD13YXZBF..................................41
PC3SD21NTZAF..................................42
PD
PC3SD21NTZBF..................................42
PD100MC0MP......................................56
PQ6CU12X2APQ.................................18
QM
QM1H0M0058......................................78
PC3SD21NTZDF..................................42
PD100MF0MP......................................56
PQx
PC3SF11YVZAF..................................41
PD410PI2E00F.....................................56
PQxxxDNA1ZPH series........................17
QM1H0P0075.......................................80
PC3SF11YVZBF..................................41
PD411PI2E00F.....................................56
PQxxxENA1ZPH series........................17
QM2A1UA003......................................21
PC3SF21YVZAF..................................42
PD412PI2E00F.....................................56
PQxxxENAHZPH series.......................17
QM2A1UA004......................................21
PC3SF21YVZBF..................................42
PD413PI2E00F.....................................56
PQxxxENB1ZPH series........................17
QM2A1UB028......................................22
PQxxxGN01ZPH series........................17
QM2A1UB032A....................................22
PC3SH11YFZAX..................................41
QM1H0P0073.......................................79
PC3SH13YFZAX..................................41
PQ0
PQxxxGN1HZPH series.......................17
QM2A1UB029......................................22
PC3SH21YFZBX..................................42
PQ035ZN01ZPH..................................17
PQxxxRDA1SZH series........................16
QM2A1UB033A....................................22
PC3ST11NSZKF..................................41
PQ035ZN1HZPH..................................17
PQxxxRDA2SZH series........................16
83
INDEX
INDEX
RJ33B3AA0DT.......................................9
VA4M1DB1370.....................................75
RJ
RJ33B3AD0DT.......................................9
VA4M1DX2323.....................................74
RJ2315EA0PB.................................11/13
RJ33B4AA0DT.......................................9
VA4M1DX2331.....................................74
RJ2315FA0PB.................................11/13
RJ33B4AD0DT.......................................9
VA4M1FB0337.....................................77
RJ2325EA0PB.................................11/13
RJ33J3BA0DT........................................9
VA4M2DX2194.....................................74
RJ2325FA0PB.................................11/13
RJ33J3CA0DT........................................9
VA4S5JD2358......................................74
RJ2331BA0PB.................................11/13
RJ33J4BA0DT........................................9
VA4S6JD2359......................................74
RJ2331CA0PB................................11/13
RJ33J4CA0DT........................................9
VA4S7JD2371......................................74
RJ2341BA0PB.................................11/13
RJ33N3AA0LT........................................9
RJ2341CA0PB................................11/13
RJ33N3AD0LT.......................................9
RJ2355DA0PB................................11/13
RJ33N4AA0LT........................................9
RJ2355EA0PB.................................11/13
RJ33N4AD0LT.......................................9
RJ2365DA0PB................................11/13
RJ3DT3AA0DT.....................................10
RJ2365EA0PB.................................11/13
RJ3DT3AD0DT.....................................10
RJ2411FA0PB.................................11/13
RJ3DT3AF0DT.....................................10
RJ2421FA0PB.................................11/13
RJ3DT4AA0DT.....................................10
RJ2431AA0PB.................................11/13
RJ3DT4AD0DT.....................................10
RJ2441AA0PB.................................11/13
RJ3DT4AF0DT.....................................10
RJ2455DA0PB................................11/13
RJ3DV3AF0DT.....................................10
RJ2465DA0PB................................11/13
RJ3DV4AF0DT.....................................10
RJ31N3AA0DT.......................................9
RJ3EV3EF0DT.....................................10
RJ31N3AD0DT.......................................9
RJ3EV4EF0DT.....................................10
RJ31N3EA0DT.......................................9
RJ52N1BA0LT........................................8
RJ31N3ED0DT.......................................9
RJ52N2BA0LT........................................8
RJ31N4AA0DT.......................................9
RJ5DY1BA0LT.......................................8
RJ31N4AD0DT.......................................9
RJ5DY2BA0LT.......................................8
RJ31N4EA0DT.......................................9
RJ63GC600............................................7
RJ31N4ED0DT.......................................9
RJ63GCE00...........................................7
RJ31P3AA0DT.......................................9
RJ31P3AD0DT.......................................9
S2
RJ31P4AA0DT.......................................9
S2S3A00F............................................41
RJ31P4AD0DT.......................................9
S2S4A00F............................................42
RJ32S3AA0DT.....................................10
S2S5A00F............................................41
RJ32S3AD0DT.....................................10
S2S5FA0F............................................41
RJ32S3AF0DT.....................................10
84
RJ32S4AA0DT.....................................10
VA
RJ32S4AD0DT.....................................10
VA3A5JZ967........................................77
RJ32S4AF0DT.....................................10
VA3D5JZ714........................................76
RJ3331AA0PB........................................9
VA4M1BC1228.....................................75
RJ3341AA0PB........................................9
VA4M1CA1309.....................................75
NOTICE
NOTICE
T
he circuit application examples in this publication are provided to explain representative
applications of SHARP devices and are not intended to guarantee any circuit design or license any
intellectual property right. SHARP takes no responsibility for any problems related to any intellectual
property right of a third party resulting from the use of SHARP devices.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials,
structures and other contents described herein at any time without notice in order to improve design or
reliability.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP
device. Manufacturing locations are also subject to change without notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any
defects that occur in equipment using any SHARP devices shown in catalogs, data books, etc.
The devices listed in this publication are designed for standard applications for use in general
electronic equipment. SHARP’s devices shall not be used for or in connection with equipment that
requires an extremely high level of reliability, such as military and aerospace applications,
telecommunication equipment (trunk lines), nuclear power control equipment and medical or other life
support equipment (e.g. Scuba). SHARP takes no responsibility for damage caused by improper use of
device, which does not meet the conditions for use specified in the relevant specification sheet.
If the SHARP devices listed in the publication fall within the scope of strategic products described in
the Foreign Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export
such SHARP devices.
This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved.
Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or
by any means, electronic or mechanical for any purpose, in whole or in part, without the express
written permission of SHARP. Express written permission is also required before any use of this
publication may be made by a third party.
Contact and consult with a SHARP representative if there are any questions about the contents of this
publication.
Specifications are subject to change without notice.
All screen images are simulated.
22-22, NAGAIKE-CHO, ABENO-KU, OSAKA 545-8522, JAPAN
SHARP MICROELECTRONICS OF
THE AMERICAS
North American Head Office
SHARP ELECTRONICS (SHANGHAI) CO., LTD.
Microelectronics Sales & Marketing Division
SHARP DEVICES EUROPE GmbH
Head Office
5700 NW Pacific Rim Boulevard
Camas, WA 98607 USA
PHONE: +1-360-834-8700 FAX: +1-360-834-8903
http://www.sharpsma.com
Western Region
1980 Zanker Road San Jose, CA 95112
PHONE: +1-408-436-4900 FAX: +1-408-436-0924
Eastern Region
285 Billerica Road, Suite 202
Chelmsford, MA 01824
PHONE: +1-978-256-0114 FAX: +1-978-256-2237
Southern Region
Braker Pointe, Bldg. #1, 10801 N. Mo-Pac Expy,
Ste 370, Austin, TX 78759
PHONE: +1-512-795-9395 FAX: +1-512-795-9685
Germany:
Hamburg Office
15F, King Tower, 28 Xin Jin Qiao Road,
Pudong DIST, Shanghai 201206 P.R. China
PHONE: +86-21-58547710
FAX:
+86-21-50304510-8400
http://ses.sharpmicro.com
Italy:
Milan Office
5F, Tower F, Phoenix Place, 5A, Shuguang xili,
Chaoyang District, Beijing 100028, P.R. China
PHONE: +86-10-8521-5688 FAX: +86-10-6588-0773
Landsberger Strasse 398, 81241 Munich, Germany
PHONE: +49-89-5468-420 FAX: +49-89-5468-4250
http://www.sharpsde.com
Sonninstrasse 3, 20097 Hamburg, Germany
PHONE: +49-40-2376-0
Beijing Office
Ventro Direzionale Colleoni Palazzo Taurus Ingresso 2
20041 Agrate Brianza, Milano, Italy
PHONE: +39-039-689-9946
UK:
European Design Centre
Edmund Halley Road, Oxford Science Park,
Oxford, OX4 4GB, United Kingdom
PHONE: +44-1865-747711
Central Region
85 W. Algonquin Road, Suite 280
Arlington Heights, IL 60005
PHONE: +1-847-258-2750 FAX: +1-847-439-2479
One Towne Square, Suite 200
Southfield, MI 48076
PHONE: +1- 248-663-5720 FAX: +1-248-663-5750
Shenzhen Office
Room AB, 21F, China Economic Trade Building, No.18
Zizhu 7th Road, Zhuzilin, Shenzhen 518131, P.R. China
PHONE: +86-755-8826-5236 FAX: +86-21-50304510-8600
SHARP-ROXY (HONG KONG) LTD.
Device Business Division, Level 26, Tower 1, Kowloon
Commerce Centre, NO.51 Kwai Cheong Road, Kwai
Chung, N.T., Hong Kong
PHONE: +852-28229311 FAX: +852-28660779
http://www.sharp.com.hk
Shenzhen Representative Office
Room 602-603, 6/F, International Chamber of
Commerce Tower, 168 Fuhua Rd. 3, CBD, Futian
District, Shenzhen 518048, Guangdong, P.R. China
PHONE: +86-755-88313505 FAX: +86-755-88313515
SHARP ELECTRONIC COMPONENTS (TAIWAN)
CORPORATION
8F-A, No. 16, Sec. 4, Nanking E. Rd., Taipei, Taiwan
PHONE: +886-2-2577-7341
FAX:
+886-2-2577-7326
SHARP ELECTRONICS (SINGAPORE) PTE., LTD.
18 Ah Hood Road, #09-51
Hiap Hoe Building at Zhongshan Park
Singapore 329983
http://www.sesl-sharp.com
SHARP ELECTRONIC COMPONENTS (KOREA)
CORPORATION
33, Gangnam-Daero 101an-gil, Seocho-Gu,
Seoul 137-902, Korea
PHONE: +82-2-711-5813 FAX: +82-2-711-5819
SHARP CORPORATION
20002660 UM ISO14001
The following facilities of Sharp Corporation have been certified under the ISO 14001 international standard for
environmental management systems. In our products and manufacturing processes, we are actively engaged in
environmental preservation efforts.
Facility
Electronic Components and Devices Company (Fukuyama)
Advanced Development and Planning Center
Mie Plant
Kameyama Plant
Electronic Components and Devices Company (Mihara)
Certificate No.
EC99J2016
Date of Registration
September 24, 1996
EC99J2038
December 3, 1996
EC99J2051
EC04J0284
20002660 UM
January 28, 1997
October 12, 2004
November 17, 2003
Scope of Registered Activities
Design, development and manufacture of electronic devices
Research and development, production technology development, and manufacture of LCD panels
The manufacture of compact LCD panels
Development, design and manufacture of LCDs
Development and production of LCD
Design, development and manufacture of laser diodes, hologram laser and LED devices
The following groups of Sharp Corporation have been
certified under the ISO 9001:2008 international
standard for quality management systems.
Certifying organization: Japan Quality Assurance Organization (JQA) [JAB certified]
Group
Certificate No.
Electronic Components and Devices Company
JQA-QM8688
Display Device Company
JQA-QM3776
Scope of Registered Activities
The Sales, design / development and manufacture of integrated circuits
The Sales, design / development and manufacture of RF devices
The Sales, design / development and manufacture of Opto-electronic devices
The Sales, design / development and manufacture of module
The Sales, design / development and manufacture (outsourcing) of power control equipment
The Sales, design / development and manufacture of LEDs
The Sales, design / development and manufacture of LED units
The Sales, design / development and manufacture of laser diodes, hologram laser
The design / development and manufacture of Liquid crystal display panel and module
Distributed by
The contents of this catalog are current as of February 2016.
This brochure uses vegetable oil ink.
Ref. No. HT9A25E
SHARP CORP. H2.0 Printed in Japan