SmartRack® Assembly Instructions Model: SRSWITCHDUCT 1111 West 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 1 the sole property of their respective owners. Copyright © 2013 Tripp Lite. All trademarks are Parts List Rail Kit A B C 6-32 Screw Cup Washer x10 x10 x2 SRSWITCHDUCT F Short Foam Pad D E Top Bottom x1 x1 x2 H Rear Lift Plate G Long Foam Pad x2 Required Tools: • Phillips Head Screwdriver (User- Supplied) 2 x1 I J M6 Screw Small Washer x8 x8 K 6-32 Screw x2 step 1 NOTE: Do not install the mounting rails provided with your switch. Instead, install the rails that come with the SRSWITCHDUCT. A 2 step 2 B 10 C 10 3 step 3 step 4 D E 1 1 F H 2 1 K 2 4 step 5 D/E 1 E/F/H 1 I 8 J 8 step 6 If necessary, cut to fit the height of your switch. G 2 5 step 7 G 2 6 Notes 7 1111 West 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice. 8 13-09-054 • 93-32D6_RevA