RJ2341CA0PB in 1/3-type Color Interlace CCD Area Sensor with 610k(960H) Pixels for PAL High Sensitivity including near-infrared light region Description The RJ2341CA0PB is a 1/3-type(6.0mm) solid-state image sensor that consists of PN photo-diodes and CCDs(charge-coupled devices) with approximately 610Kpixels (horizontal 1020 × vertical 595). The sensor provides a stable high-resolution color image and high sensitivity including near-infrared region. ARRANGEMENT OF PIXELS 1 Pin Applications OB(Optical Black) 2pixels ・Cameras (Security cameras, Camcorders, Industrial monitor cameras, etc) ・Pattern recognition OB 4pixels 976 (H) x 582 (V) OB 40pixels Features OB 11pixels ・ Number of image pixels ・ Sensitivity ・ NIR sensitivity ・ Smear ratio ・ Color filter ・ Supply Voltages ・ Ambient operating temperature ・ Package ・ Reflow 976H × 582V 2600mV @F4 1000lx with a 90% reflector 1.9 time compared with the RJ2341BA0PB @ λ=900nm -125dB Mg/G/Cy/Ye +15V/+3.3V/-8V -30 ºC to +85 ºC 16pinDIP(plastic) RJ2341CA0LT with reflowable package System Configuration EEP ROM Analog output for NTSC/PAL Four-power-supply CCD V driver CDS/PGA/12-bit ADC + DSP LR36B16 Analog output for Y/C Digital output for UYVY (ITU-R BT656 compatible) Power supply voltage 3.3V "iSHCCDⅡ“ and "iSHartina" are the trademarks of Sharp Corporation. The "iSHCCDⅡ" is an advanced CCD image sensor that drastically improves light efficiency by including nearinfrared light region as a basic structure of "iSHCCD". The "iSHartina" series is a key device group of Sharp which realizes a next-generation sensing world. The circuit diagram and others included in this specifications are intended for use to explain typical application examples. Therefore, we take no responsibility for any problem as may occur due to the use of the included circuit and for any problem with industrial proprietary rights or other rights.