AR4PD, AR4PG, AR4PJ Datasheet

AR4PD, AR4PG, AR4PJ
www.vishay.com
Vishay General Semiconductor
Fast Switching Avalanche Surface Mount Rectifiers
FEATURES
• Very low profile - typical height of 1.1 mm
Available
• Ideal for automated placement
eSMP ® Series
• Glass passivated pellet chip junction
• Fast reverse recovery time
K
• Controlled avalanche characteristics
• Low leakage current
1
• High forward surge capability
2
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
TO-277A (SMPC)
K
Cathode
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHM3
Anode 1
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Anode 2
TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS
IF(AV)
4.0 A
VRRM
200 V, 400 V, 600 V
IFSM
65 A
trr
140 ns
EAS
20 mJ
VF at IF = 4.0 A
1.02 V
TJ max.
175 °C
Package
TO-277A (SMPC)
Diode variation
Single die
For use in lighting, fast switching rectification of power
supplies, inverters, converters, and freewheeling diodes for
consumer, automotive, and telecommunication.
MECHANICAL DATA
Case: TO-277A (SMPC)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Base P/NHM3 - halogen-free, RoHS-compliant and
AEC-Q101 qualified
Base P/NHM3_X - halogen-free, RoHS-compliant and
AEC-Q101 qualified 
(“_X” denotes revision code e.g. A, B,.....)
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 2 whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
Maximum repetitive peak reverse voltage
VRRM
Peak forward surge current 10 ms single half sine-wave
superimposed on rated load
Non-repetitive avalanche energy at TJ = 25 °C
IAS = 2.5 A max.
IAS = 1.0 A typ.
Operating junction and storage temperature range
AR4PG
AR4PJ
AR4D
AR4G
AR4J
200
400
600
(1)
4.0
IF (2)
2.0
IFSM
65
IF
Maximum DC forward current (fig. 1)
AR4PD
EAS
TJ, TSTG
20
30
-55 to +175
UNIT
V
A
A
mJ
°C
Notes
(1) Mounted on 30 mm x 30 mm pad areas, 1 oz. FR4 PCB
(2) Free air, mounted on recommended pad area
Revision: 23-Feb-16
Document Number: 89334
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AR4PD, AR4PG, AR4PJ
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA = 25 °C
SYMBOL
VF (1)
TYP.
MAX.
1.24
1.6
1.02
1.20
0.6
10
60
250
UNIT
V
Instantaneous forward voltage
IF = 4.0 A
Reverse current
Rated VR
Maximum reverse recovery time
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr
110
140
ns
Typical junction capacitance per diode
Rated VR = 4.0 V, 1 MHz
CJ
77
-
pF
AR4PJ
UNIT
TA = 125 °C
TA = 25 °C
TA = 125 °C
IR (2)
μA
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
AR4PD
AR4PG
RJA (1)
85
RJM (2)
5
°C/W
Notes
(1) Free air, mounted on recommended PCB 1 oz. pad are; thermal resistance R
JA - junction to ambient
(2) Units mounted on PCB with 30 mm x 30 mm copper pad areas; R
JM - junction to mount
ORDERING INFORMATION (Example)
PREFERRED P/N
AR4PJ-M3/86A
AR4PJ-M3/87A
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.10
86A
1500
7" diameter plastic tape and reel
6500
13" diameter plastic tape and reel
0.10
87A
(1)
0.10
86A
1500
7" diameter plastic tape and reel
AR4PJHM3/86A (1)
0.10
87A
6500
13" diameter plastic tape and reel
AR4PJHM3_A/H (1)
0.10
H
1500
7" diameter plastic tape and reel
AR4PJHM3_A/I (1)
0.10
I
6500
13" diameter plastic tape and reel
AR4PJHM3/86A
Note
(1) AEC-Q101 qualified
Revision: 23-Feb-16
Document Number: 89334
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AR4PD, AR4PG, AR4PJ
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
4.8
Instantaneous Reverse Current (μA)
1000
4.4
TM = 153 °C
DC Forward Current (A)
4.0
3.6
3.2
2.8
2.4
TA = 25 °C
2.0
1.6
1.2
0.8
TM Measured
at the Cathode Band Terminal
0.4
0
25
50
75
100
TA = 125 °C
10
TA = 75 °C
1
TA = 25 °C
0.1
125
150
10
175
20
30
40
50
60
70
80
90
100
Ambient Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 4 - Typical Reverse Leakage Characteristics
100
6.0
5.5
Junction Capacitance (pF)
D = 0.3
D = 0.2
4.5
4.0
D = 0.1
D = 1.0
3.5
3.0
2.5
T
2.0
1.5
1.0
D = tp/T
0.5
10
tp
1
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
0.1
1
10
100
Average Forward Current (A)
Reverse Voltage (V)
Fig. 2 - Average Power Loss Characteristics
Fig. 5 - Typical Junction Capacitance
100
TA = 175 °C
TA = 125 °C
TA = 75 °C
1
TA = 25 °C
0.1
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
Transient Thermal Impedance (°C/W)
100
10
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
D = 0.5 D = 0.8
5.0
Average Power Loss (W)
100
0.01
0
Instantaneous Forward Current (A)
TA = 175 °C
Junction-to-Ambient
10
1
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Revision: 23-Feb-16
Document Number: 89334
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AR4PD, AR4PG, AR4PJ
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-277A (SMPC)
0.187 (4.75)
0.175 (4.45)
0.016 (0.40)
0.006 (0.15)
K
0.262 (6.65)
0.250 (6.35)
0.242 (6.15)
0.238 (6.05)
2
1
0.047 (1.20)
0.039 (1.00)
0.171 (4.35)
0.167 (4.25)
0.146 (3.70)
0.134 (3.40)
Mounting Pad Layout
0.087 (2.20)
0.075 (1.90)
0.189 (4.80)
MIN.
0.189 (4.80)
0.173 (4.40)
0.186 (4.72)
MIN.
0.268
(6.80)
0.155 (3.94)
NOM.
0.030 (0.75) NOM.
0.049 (1.24)
0.037 (0.94)
0.050 (1.27)
MIN.
0.084 (2.13) NOM.
0.053 (1.35)
0.041 (1.05)
0.041
(1.04)
0.055 (1.40)
MIN.
Conform to JEDEC® TO-277A
Revision: 23-Feb-16
Document Number: 89334
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages