1N6036-1N6072

1N6036(A) thru 1N6072(A)
Available on
commercial
versions
1500 WATT BIDIRECTIONAL
TRANSIENT VOLTAGE SUPPESSOR
Qualified Levels:
JAN, JANTX, and
JANTXV
Qualified per MIL-PRF-19500/507
DESCRIPTION
This popular Transient Voltage Suppressor (TVS) series for 1N6036 thru 1N6072A are JEDEC
registered selections for bidirectional devices. All have the same high Peak Pulse Power
rating of 1500 W with extremely fast response times. They are also available in military
qualified selections as described in the “Features” section herein. They are most often used
for protecting against transients from inductive switching environments, induced RF effects, or
induced secondary lightning effects as found in lower surge levels of IEC61000-4-5. They are
also very successful in protecting airborne avionics and electrical systems. Since their
response time is virtually instantaneous, they can also protect from ESD and EFT per
IEC61000-4-2 and IEC61000-4-4.
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
•
•
•
•
•
•
•
Bidirectional TVS series in axial packages for thru-hole mounting.
Suppresses transients up to 1500 watts @ 10/1000 µs (see Figure 1).
Clamps transients in less than 100 pico seconds.
Working voltage (V WM ) range 5.5 V to 185 V.
Hermetically sealed DO-13 metal package.
JAN, JANTX, JANTXV military qualifications also available per MIL-PRF-19500/507 for the tighter
tolerance “A” suffix types by adding the JAN, JANTX, or JANTXV prefix, e.g. JANTXV1N6036A,
etc.
RoHS compliant versions available (commercial grade only).
DO-13 (DO-202AA)
Package
Also available in:
DO-13 package
(unidirectional)
1N5629 – 1N5665A
Case 1 package
(plastic equivalent)
1.5KE6.8C – 1.5KE220CA
APPLICATIONS / BENEFITS
•
•
•
•
•
•
Protection from switching transients and induced RF.
Protection from ESD & EFT per IEC 61000-4-2 and IEC 61000-4-4.
Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance:
Class 1: 1N6036 to 1N6072A
Class 2: 1N6036 to 1N6067A
Class 3: 1N6036 to 1N6061A
Class 4: 1N6036 to 1N6054A
Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance:
Class 1: 1N6036 to 1N6064A
Class 2: 1N6036 to 1N6057A
Class 3: 1N6036 to 1N6049A
Class 4: 1N6036 to 1N6042A
Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance:
Class 2: 1N6036 to 1N6048A
Class 3: 1N6036 to 1N6041A
Inherently radiation hard as described in Microsemi “MicroNote 050”.
DO-215AB package
(Gull-wing)
SMCG5.0 – SMCG170A
DO-214AB package
(J-bend)
SMCJ5.0 – SMCJ170A
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
T4-LDS-0097, Rev. 3 (120714)
©2012 Microsemi Corporation
Page 1 of 7
1N6036(A) thru 1N6072(A)
MAXIMUM RATINGS
Parameters/Test Conditions
Junction and Storage Temperature
(1)
Peak Pulse Power @ TL = +25 ºC
(2)
Rated Average Power Dissipation @ TL ≤ +125 ºC
Solder Temperature @ 10 s
Symbol
Value
Unit
TJ and TSTG
P PP
P M(AV)
TSP
-55 to +175
1500
1
260
ºC
W
W
o
C
Notes: 1. At 10/1000 us with repetition rate of 0.01% or less (see Figures 1, 2, & 4).
2. At 10 mm from body (see derating in Figure 3 and note below).
MECHANICAL and PACKAGING
•
•
•
•
•
•
•
CASE: DO-13 (DO-202AA), welded, hermetically sealed metal and glass.
TERMINALS: All external metal surfaces are tin-lead plated and solderable per MIL-STD-750 method 2026.
MARKING: Part number.
POLARITY: Not applicable for bidirectional TVS.
TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
WEIGHT: Approx 1.4 grams.
See Package Dimensions on last page.
PART NOMENCLATURE
JAN
1N6036
A
(e3)
Reliability Level
JAN = JAN level
JANTX = JANTX level
JANTXV = JANTXV level
RoHS Compliance
e3 = RoHS compliant (available
on commercial grade only)
Blank = non-RoHS compliant
(All of the above require “A” suffix)
Blank = Commercial
Voltage Tolerance
A = 5%
Blank = 10%
JEDEC type number
(See Electrical Characteristics
table)
SYMBOLS & DEFINITIONS
Definition
Symbol
V WM
V (BR)
VC
I PP
P PP
ID
I (BR)
Standoff Voltage: Applied Reverse Voltage to assure a nonconductive condition.
o
Breakdown Voltage: This is the Breakdown Voltage the device will exhibit at 25 C.
Maximum Clamping Voltage: The maximum peak voltage appearing across the TVS when subjected to the peak pulse
current in a one millisecond time interval. The peak pulse voltage is the combination of voltage rise due to both the
series resistance and thermal rise and positive temperature coefficient (α V(BR) ).
Peak Pulse Current: The peak current during the impulse. (See Figure 2)
Peak Pulse Power: The pulse power as determined by the product of V C and I PP .
Standby Current: The current at the standoff voltage (V WM ).
Breakdown Current: The current used for measuring Breakdown Voltage (V (BR) ).
T4-LDS-0097, Rev. 3 (120714)
©2012 Microsemi Corporation
Page 2 of 7
1N6036(A) thru 1N6072(A)
ELECTRICAL CHARACTERISTICS @ 25 oC (Test Both Polarities)
JEDEC
Type
No.
1N6036
*1N6036A
1N6037
*1N6037A
1N6038
*1N6038A
1N6039
*1N6039A
1N6040
*1N6040A
1N6041
*1N6041A
1N6042
*1N6042A
1N6043
*1N6043A
1N6044
*1N6044A
1N6045
*1N6045A
1N6046
*1N6046A
1N6047
*1N6047A
1N6048
*1N6048A
1N6049
*1N6049A
1N6050
*1N6050A
1N6051
*1N6051A
1N6052
*1N6052A
1N6053
*1N6053A
1N6054
*1N6054A
1N6055
*1N6055A
1N6056
*1N6056A
1N6057
*1N6057A
1N6058
*1N6058A
1N6059
*1N6059A
1N6060
*1N6060A
1N6061
*1N6061A
Rated
Standoff
Voltage
V WM
Volts
5.5
6.0
6.5
7.0
7.0
7.5
8.0
8.5
8.5
9.0
9.0
10.0
10.0
11.0
11.0
12.0
12.0
13.0
14.0
15.0
16.0
17.0
17.0
18.0
19.0
20.0
21.0
22.0
24.0
25.0
26.0
28.0
29.0
30.0
31.0
33.0
34.0
36.0
38.0
40.0
41.0
43.0
45.0
47.0
48.0
53.0
55.0
58.0
60.0
64.0
66.0
70.0
T4-LDS-0097, Rev. 3 (120714)
Breakdown
Voltage
V (BR)
V (BR)min
V (BR)max
@ I (BR)
Volts
6.75
7.13
7.38
7.79
8.19
8.65
9.0
9.5
9.9
10.5
10.8
11.4
11.7
12.4
13.5
14.3
14.4
15.2
16.2
17.1
18.0
19.0
19.8
20.9
21.6
22.8
24.3
25.7
27.0
28.5
29.7
31.4
32.4
34.2
35.1
37.1
38.7
40.9
42.3
44.7
45.9
48.5
50.4
53.2
55.8
58.9
61.2
64.6
67.5
71.3
73.8
77.9
Volts
8.25
7.88
9.02
8.61
10.00
9.55
11.0
10.5
12.1
11.6
13.2
12.6
14.3
13.7
16.5
15.8
17.5
16.8
19.8
18.9
22.0
21.0
24.2
23.1
26.4
25.2
29.7
28.4
33.0
31.5
36.3
34.7
39.6
37.8
42.9
41.0
47.3
45.2
51.7
49.4
56.1
53.6
61.6
58.8
68.2
65.1
74.8
71.4
82.5
78.8
90.2
86.1
mA
10
10
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum
Clamping
Voltage
V C @ I PP
Maximum
Standby
Current
I D @ V WM
Maximum
Peak Pulse
Current
I PP
(See Fig. 2)
Volts
11.7
11.3
12.5
12.1
13.8
13.4
15.0
14.5
16.2
15.6
17.3
16.7
19.0
18.2
22.0
21.2
23.5
22.5
26.5
25.2
29.1
27.7
31.9
30.6
34.7
33.2
39.1
37.5
43.5
41.4
47.7
45.7
52.0
49.9
56.4
53.9
61.9
59.3
67.8
64.8
73.5
70.1
80.5
77.0
89.0
85.0
98.0
92.0
108.0
103.0
118.0
113.0
µA
1000
1000
500
500
200
200
50
50
10
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Amps
128
132
120
124
109
112
100
103
93
96
87
90
79
82
68
71
64
67
56.5
59.5
51.5
54
47
49
43
45
38.5
40
34.5
36
31.5
33
29
30
26.5
28
24
25.3
22.2
23.2
20.4
21.4
18.6
19.5
16.9
17.7
15.3
16.3
13.9
14.6
12.7
13.3
©2012 Microsemi Corporation
Maximum
Temperature
Coefficient of
V (BR)
α V(BR)
o
%/ C
.061
.061
.065
.065
.068
.068
.073
.073
.075
.075
.078
.078
.081
.081
.084
.084
.086
.086
.088
.088
.090
.090
.092
.092
.094
.094
.095
.096
.097
.097
.098
.098
.099
.099
.100
.100
.101
.101
.101
.101
.102
.102
.103
.103
.104
.104
.104
.104
.105
.105
.105
.105
Page 3 of 7
1N6036(A) thru 1N6072(A)
ELECTRICAL CHARACTERISTICS @ 25 oC (Test Both Polarities)
JEDEC
Type
No.
1N6062
*1N6062A
1N6063
*1N6063A
1N6064
*1N6064A
1N6065
*1N6065A
1N6066
*1N6066A
1N6067
*1N6067A
1N6068
*1N6068A
1N6069
*1N6069A
1N6070
*1N6070A
1N6071
*1N6071A
1N6072
*1N6072A
Rated
Standoff
Voltage
V WM
Breakdown
Voltage
V (BR)
Maximum
Clamping
Voltage
V C @ I PP
Maximum
Standby
Current
I D @ V WM
Maximum
Peak Pulse
Current
I PP
(See Fig. 2)
V (BR)min
V (BR)max
@ I (BR)
Volts
Volts
Volts
mA
Volts
µA
Amps
73.0
75.0
81.0
82.0
90.0
94.0
95.0
100.0
105.0
110.0
121.0
128.0
137.0
145.0
145.0
150.0
155.0
160.0
165.0
170.0
175.0
185.0
81.9
86.5
90.0
95.0
99.0
105.0
108.0
114.0
117.0
124.0
135.0
143.0
153.0
162.0
162.0
171.0
171.0
181.0
180.0
190.0
198.0
209.0
100.0
95.5
110.0
105.0
121.0
116.0
132.0
126.0
143.0
137.0
165.0
158.0
187.0
179.0
198.0
189.0
210.0
200.0
220.0
210.0
242.0
231.0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
131.0
125.0
144.0
137.0
158.0
152.0
176.0
168.0
191.0
182.0
223.0
213.0
258.0
245.0
274.0
261.0
292.0
278.0
308.0
294.0
344.0
328.0
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
11.4
12.0
10.4
11.0
9.5
9.9
8.5
8.9
7.8
8.2
6.7
7.0
5.8
6.1
5.5
5.7
5.1
5.4
4.9
5.1
4.3
4.6
Maximum
Temperature
Coefficient of
V (BR)
α V(BR)
o
%/ C
.106
.106
.106
.106
.107
.107
.107
.107
.107
.107
.108
.108
.108
.108
.108
.108
.108
.108
.108
.108
.108
.108
* Also available in military qualified types by adding the prefix JAN, JANTX or JANTXV per MIL-PRF-19500/507.
T4-LDS-0097, Rev. 3 (120714)
©2012 Microsemi Corporation
Page 4 of 7
1N6036(A) thru 1N6072(A)
Peak Pulse Power (Ppp) or Current Ipp in
percent of 25° C Rating
GRAPHS
Ambient Temperature in °C
Reverse Peak Pulse Power (Ppp)
FIGURE 1
Derating Curve
Pulse Time (t p )
FIGURE 2
Peak Pulse Power versus Pulse Time
T4-LDS-0097, Rev. 3 (120714)
©2012 Microsemi Corporation
Page 5 of 7
1N6036(A) thru 1N6072(A)
Pulse Current in Percent of Ipp
GRAPHS
Time (t) in milliseconds
Pulse Current in Percent of Ipp
FIGURE 3
Current impulse waveform (I PP = 10 μs)
Time (t) in milliseconds
FIGURE 4
Current impulse waveform (I PP = 8 μs).
T4-LDS-0097, Rev. 3 (120714)
©2012 Microsemi Corporation
Page 6 of 7
1N6036(A) thru 1N6072(A)
PACKAGE DIMENSIONS
NOTES:
1 Dimensions are in inches.
2 Millimeter equivalents are given for general information only.
3 The major diameter is essentially constant along its length.
4 Within this zone, diameter may vary to allow for lead finishes and
irregularities.
5 Dimension to allow for pinch or seal deformation anywhere along
tubulation.
6 Symbol for bidirectional transient suppressor.
7 Lead 1 shall be electrically connected to the case.
8 In accordance with ASME Y14.5M, diameters are equivalent to Φx
symbology.
T4-LDS-0097, Rev. 3 (120714)
Symbol
BD
BL
BLT
CD
LD
LL
LU
©2012 Microsemi Corporation
Dimensions
Inches
Millimeters
Min
Max
Min
Max
.215
.293
.045
.025
1.000
.235
.357
.570
.100
.035
1.625
.188
5.46
7.44
1.14
0.64
25.40
5.97
9.07
14.48
2.54
0.89
41.28
4.78
Notes
3
5
4
Page 7 of 7