Bill of Materials for the AR0132AT6B00XPEAH3-GEVB Evaluation Board Item Quantity Part number Description MFG 1 2 3 4 5 6 7 8 C1 C7 C4, C6 C2 C5, C8 C3 R2 R3 R4 R1, R5 L1 L2 1 1 1 1 1 2 1 4 1 1 2 1 2 1 1 1 1 2 1 1 Sunex DSL945D Sunex DSL215B APAA3000 APAA0020 APAA2006 159752 APAF0004 91772A144 "X" cap, box type Ceramic cap, monolythic Ceramic cap, monolythic Electrolytic cap Electrolytic cap Electrolytic cap Resistor, 1/8W SMD Resistor, 1/8W SMD Resistor, 1/8W SMD Resistor, 1/8W SMD Inductor (EMI choke) Output Inductor Sunex with IR 670nm built-in Sunex with IR 690nm built-in Lens mount, MILE2 BASE, DEMO TO C-MOUNT Lens adapter, C-Mount to M12X0.5 Lens extension 2.5mm O-ring, 6-023.00-01.00 N70 NBR Lens Locking nut, M12XP0.5 Screw 100nF, X2 10 nF, 50V 100nF, 50V 10uF, 400 or 450V 22uF, 50Vdc 470uF, 25V 4.7 ohms 470 ohms 100 ohms 2K 820 uH or 1 mH 1.5 mH, 500mA Sunex Sunex Machine shop Machine shop Machine shop Eriks West I Core Technologies McMaster 1/22/2016 10% 10% 10% 0.1 0.1 0.05 0.05 0.05 0.05 Page 1 of 1 Comment Can use local machine shop Can use local machine shop Can use local machine shop LS = 10 mm 805 805 LS=5mm, 12 x 15.5mm LS=2.5mm, D=5mm 7.5x15mm, LS=3.5mm SMD 805 SMD 805 SMD 805 SMD 805 LS=5mm, Dia=7.5mm 12mm x 12mm SMD www.onsemi.com