STAC250V2-500E 600 W, 250 V SuperDMOS transistor Datasheet - production data Features Operating frequency up to 27 MHz POUT = 600 W typ. with 23 dB gain @ 13.56 MHz/250 V Designed for Class-AB, C, D and E operation V(BR)DSS > 1000 V Housed in STAC® package, using air cavity packaging technology In compliance with the 2002/95/EC1 European Directive Description Figure 1: Pin connection 1 (drain) 2 (source) 4 (source) The STAC250V2-500E uses the latest RF Power SuperDMOS technology specially designed for 150 V and 250 V industrial RF power Class-AB, C, D and E generators such as PECVD, plasma sputtering, flat panel and solar cell manufacturing equipment. The STAC250V2-500E benefits from the latest generation of STAC® air cavity packaging, which exhibits a 25% lower thermal resistance compared to equivalent ceramic packages. Table 1: Device summary Order code Marking Package Packing STAC250V2500E 250V2-500 (1) STAC177B Plastic tray 3 (gate) 5 (source) on backside Notes: (1)For more details please refer to Section 6: "Marking, packing and shipping specifications". October 2015 DocID026071 Rev 5 This is information on a product in full production. 1/13 www.st.com Contents STAC250V2-500E Contents 1 2 Electrical data .................................................................................. 3 1.1 Maximum ratings ............................................................................... 3 1.2 Thermal data ..................................................................................... 3 Electrical characteristics ................................................................ 4 2.1 Static ................................................................................................. 4 2.2 Dynamic ............................................................................................ 4 3 Impedance data ............................................................................... 6 4 Typical performance ....................................................................... 7 5 Package information ....................................................................... 9 5.1 6 7 2/13 STAC177B package information ....................................................... 9 Marking, packing and shipping specifications............................ 11 Revision history ............................................................................ 12 DocID026071 Rev 5 STAC250V2-500E Electrical data 1 Electrical data 1.1 Maximum ratings (TCASE = 25 °C) Table 2: Absolute maximum ratings Symbol Value Unit V(BR)DSS Drain-source voltage 1000 V VGS Gate-source voltage ± 20 V Max. operating junction temperature 200 °C -65 to +150 °C TJ TSTG 1.2 Parameter Storage temperature Thermal data Table 3: Thermal data Symbol RthJC Parameter Junction-case thermal resistance DocID026071 Rev 5 Value Unit 0.14 °C/W 3/13 Electrical characteristics 2 STAC250V2-500E Electrical characteristics TCASE = +25 oC 2.1 Static Table 4: Static Symbol V(BR)DSS 2.2 Test conditions Min. IDS = 250 µ A Typ. Max. 1000 Unit V IDSS VGS = 0 V; VDS = 750 V 1 µA IGSS VGS = 20 V; VDS = 0 V 1 µA VTH ID = 250 µ A 4.7 6 V VDS(ON) VGS = 10 V ; ID = 7 A 3 4.2 5 V GFS VDS = 7 V ; ID = 3.5 A 4.4 S CISS VGS = 0 V; VDS = 150 V ; f = 1 MHz 980 pF COSS VGS = 0 V; VDS = 150 V ; f = 1 MHz 140 pF CRSS VGS = 0 V; VDS = 150 V ; f = 1 MHz 1 pF Dynamic Frequency = 13.56 MHz Class-C Table 5: Dynamic Symbol POUT Gain Efficiency Test conditions Min. Typ. Max. Unit VDD = 150 V, PIN = 3 W 500 520 - VDD = 250 V, PIN = 2.4 W 500 700 - VDD = 150 V, PIN = 3 W 22 22.3 - VDD = 250 V, PIN = 2.4 W 24 24.6 - VDD = 150 V, POUT = 3 W 70 73 - % VDD = 250 V, POUT = 2.4 W 70 74 - % W dB (1) VDD = 150 V, POUT = 500 W 10:1 65:1 - VDD = 250 V, POUT = 500 W 6:1 20:1(1) - Load mismatch Notes: (1)Under 4/13 pulse conditions: 1 ms - 10%. DocID026071 Rev 5 VSWR STAC250V2-500E Electrical characteristics Table 6: Dynamic (frequency = 13.56 MHz Class-AB, IDQ = 25 mA) Symbol POUT Gain Efficiency Test conditions Min. Typ. Max. Unit VDD = 150 V, PIN = 1 W 500 580 - VDD = 250 V, PIN = 0.5 W 500 700 - VDD = 150 V, PIN = 1 W 27 27.6 - VDD = 250 V, PIN = 0.5 W 30 31 - VDD = 150 V, PIN = 1 W 70 73 - % VDD = 250 V, PIN = 0.5 70 75 - % W dB (1) VDD = 150 V, POUT = 500 W 6:1 65:1 - VDD = 250 V, POUT = 500 W 5:1 20:1(1) - Load mismatch VSWR Notes: (1)Under pulse conditions: 1 ms - 10%. DocID026071 Rev 5 5/13 Impedance data 3 STAC250V2-500E Impedance data Figure 2: Impedance data Table 7: Impedance values 6/13 Frequency (MHz) Zin Zdl (150 V) 13.56 4.6 + j 3.2 36 + j 18 DocID026071 Rev 5 Zdl (180 V) Zdl (250 V) 39 + j 22 44 + j 56 STAC250V2-500E Typical performance Figure 3: Capacitance vs. drain-source voltage 1,000,000 100,000 10,000 Capacitance (pF) 1,000 Ciss 100 Coss 10 1 Crss 0 0.1 1 10 100 Drain-source voltage (V) 1000 GIPG100220141622FSR Figure 4: Gain and efficiency vs. output power @ 150 V (frequency = 13.56 MHz Class-C) 24 100 Gain 90 Efficiency 22 80 21 70 20 60 19 50 18 40 17 30 16 20 15 10 14 Efficiency (%) 23 Gain (dB) 4 Typical performance 0 0 100 200 300 400 500 600 Output power (W) DocID026071 Rev 5 7/13 Typical performance STAC250V2-500E Figure 5: Gain and efficiency vs. output power @ 250 V (frequency = 13.56 MHz Class-C) 24 100 Gain 90 Efficiency 22 80 21 70 20 60 19 50 18 40 17 30 16 20 15 10 14 0 0 100 200 300 400 500 Output power (W) 8/13 DocID026071 Rev 5 600 700 Efficiency (%) Gain (dB) 23 STAC250V2-500E 5 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 5.1 STAC177B package information Figure 6: STAC177B package outline 8334044_A DocID026071 Rev 5 9/13 Package information STAC250V2-500E Table 8: STAC177B package mechanical data mm Dim. Min. Max. A 5.72 5.97 B 6.73 6.99 C 21.84 22.10 D 28.70 28.96 E F 28.02 0.10 G 10/13 Typ. 0.15 0.81 H 1.45 1.70 I 5.79 6.15 J 27.43 28.45 K 15.01 15.27 DocID026071 Rev 5 STAC250V2-500E 6 Marking, packing and shipping specifications Marking, packing and shipping specifications Table 9: Packing and shipping specifications Order code Packaging Pieces per tray Dry pack humidity Lot code STAC250V2-500E Plastic tray 25 < 10% Not mixed Figure 7: Marking layout Table 10: Marking specifications Symbol Description CZ Assembly plant xxx Last 3 digits of diffusion lot VY Diffusion plant MAR CZ Country of origin Test and finishing plant y Assembly year yy Assembly week DocID026071 Rev 5 11/13 Revision history 7 STAC250V2-500E Revision history Table 11: Document revision history Date Revision 14-Mar-2014 1 Initial release. 04-Aug-2014 2 Modified title in cover page. Updated static table. Minor text change 15-Sep-2014 3 Document status promoted from preliminary to production data. 10-Nov-2014 4 Updated title and features in cover page. 5 Updated features and description in cover page. Updated electrical data section. Updated the dynamic table, the table of impedance values and V(BR)DSS parameter in the static table. Changed figures of the typical performance section. Updated package information section. 07-Oct-2015 12/13 Changes DocID026071 Rev 5 STAC250V2-500E IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved DocID026071 Rev 5 13/13