200168B.pdf

DATA SHEET
AS002R2-12, AS002R2-12LF: GaAs IC SPDT Low-Loss
Reflective Switch 300 kHz–2.5 GHz
Features
Pin Out
VS
10k
CBP
CBL
GND
7
3
6
GND
CBP
J3
CBL
CBL
Description
5
V2
4
The AS002R2-12 is a low-loss IC FET SPDT reflective generalpurpose switch in a plastic SOIC-8 package for commercial
low- cost, low-power applications. The switch operates with
-5, 0 V or 0, +5 V when “floated” as shown in the Pin Out diagram.
NEW
8
1
J1
2
Low insertion loss (0.5 dB @ 0.9 GHz)
● High isolation (35 dB @ 0.9 GHz)
● Low-power T/R switch
● Low-cost SOIC-8 plastic package
● Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C
per JEDEC J-STD-020
●
J2
V1
External components shown are for positive voltage operation only.
CBL = 100 pF, CBP = 1000 pF for operation >500 MHz.
Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances)-compliant packaging.
Electrical Specifications at 25 °C (0, -5 V)
Parameter(1)
Insertion
loss(2)
Frequency
Min.
300 kHz–0.5 GHz
300 kHz–1.0 GHz
300 kHz–2.0 GHz
300 kHz–2.5 GHz
Isolation
300 kHz–0.5 GHz
300 kHz–1.0 GHz
300 kHz–2.0 GHz
300 kHz–2.5 GHz
VSWR(3)
300 kHz–0.5 GHz
300 kHz–1.0 GHz
300 kHz–2.5 GHz
40
30
22
18
Typ.
Max.
Unit
0.4
0.5
0.7
0.8
0.5
0.6
0.8
0.9
dB
dB
dB
dB
42
32
24
20
1.2:1
1.3:1
1.5:1
dB
dB
dB
dB
1.3:1
1.5:1
1.7:1
1. All measurements made in a 50 Ω system, unless otherwise specified.
2. Insertion loss changes by 0.003 dB/°C.
3. Insertion loss state.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200168 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • August 15, 2006
1
DATA SHEET • AS002R2-12, AS002R2-12LF
Operating Characteristics at 25 °C (0, -5 V)
Parameter
Condition
Switching characteristics
Rise, fall
On, off
Video feedthru
Frequency
Min.
10/90% or 90/10% RF
50% CTL to 90/10% RF
TRISE = 1 ns, BW = 500 MHz
Input power for 1 dB compression
Intermodulation intercept point (IP3)
For two-tone input power 13 dBm
Max.
Unit
3
6
15
ns
ns
mV
0.5–2 GHz
0.05 GHz
24
16
dBm
dBm
0.5–2 GHz
46
dBm
25
°C/W
Thermal resistance
Control voltages
Typ.
VLOW = 0 to -0.2 V @ 20 µA max.
VHIGH = -5 V @ 50 µA to -8 V @ 200 µA max.
1.2
60
1.0
50
Isolation (dB)
Insertion Loss (dB)
Typical Performance Data (0, -5 V)
0.8
85 °C
0.6
40
30
-40 °C
20
0.4
10
0.2
2
1
1
3
2
Frequency (GHz)
Frequency (GHz)
Insertion Loss vs. Frequency
Isolation vs. Frequency
1.5
VSWR
1.4
1.3
1.2
1.1
1.0
1
2
3
Frequency (GHz)
VSWR vs. Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
August 15, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200168 Rev. B
3
DATA SHEET • AS002R2-12, AS002R2-12LF
Truth Table
Absolute Maximum Ratings
Characteristic
Negative Operation
V1
V2
J1–J2
J1–J3
0
-5
-5
Isolation
Insertion loss
0
Insertion loss
Isolation
All other conditions not recommended.
Positive Operation
V1
V2
J1–J2
J1–J3
VHIGH
0
Isolation
Insertion loss
0
VHIGH
Insertion loss
Isolation
All other conditions not recommended.
VHIGH = 5 to 8 V (VS = VHIGH ± 0.2 V).
SOIC-8
Pin 8
0.050 (1.27 mm) BSC
RF input power
Control voltage
Value
2 W > 500 MHz 0/-8 V
0.5 W @ 50 MHz 0/-8 V
+0.2 V, -8 V
Operating temperature
-40 °C to +85 °C
Storage temperature
-65 °C to +150 °C
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce potentials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
0.244 (6.20 mm)
0.228 (5.80 mm)
Pin 1
Indicator
Recommended Solder Reflow Profiles
Pin 1
0.068
(1.73 mm) Max.
0.197 (5.00 mm)
0.189 (4.80 mm)
0.010 (0.25 mm)
0.004 (0.10 mm)
Refer to the “Recommended Solder Reflow Profile”
Application Note.
0.020 (0.51 mm) Max.
0.049
(1.24 mm)
0.016
(0.41 mm)
0.016 Max.
(0.41 mm) x
45˚ Chamfer
0.158 (4.00 mm)
0.150 (3.80 mm)
0.010 (0.25 mm)
0.007 (0.17 mm)
8˚
Max.
Tape and Reel Information
Refer to the “Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation” Application Note.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200168 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • August 15, 2006
3
DATA SHEET • AS002R2-12, AS002R2-12LF
Copyright © 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided
by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and
names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
August 15, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200168 Rev. B