OPTO PROXIMITY SENSOR / PROXIMITY SENSOR WITH INTEGRATED AMBIENT LIGHT SENSOR ☆ New ■ Proximity Sensor Absolute maximum ratings Model No. GP2AP002S30F Features Compact size (4.0 × 2.0 × 1.25 t mm) Drastically reduced LED current consumption by employing a light modulation system Built-in LEDs for simple optical design and I2C output (LED emission duty: MAX. 0.3%) VCC (V) Topr (°C) 3.8 –25 to +85 product (Ta = 25°C) Electro-optical characteristics NonDetecting Peak Dissipation detecting distance emission current distance Lon wavelength ICC (µA) Loff (mm) λp TYP. (mm) MIN. (nm) MAX. 240 25 150 940 GP2AP002S30F ■ Proximity Sensor with Integrated Ambient Light Sensor Absolute maximum ratings (Ta = 25°C) Electro-optical characteristics Proximity sensor portion Model No. GP2AP030A00F ☆GP2AP007A00F ☆GP2AP008T00F Features LED and ambient light sensor combined in a single package (4.0 × 2.1 × 1.25 t mm) Built-in LEDs for simple optical design Illuminance output: digital 16-bit output (Minimum detectable illuminance: 0.02 lx) I2C output compatible (proximity sensor, ambient light sensor) LED and ambient light sensor combined in a single package (2.5 × 2.0 × 1.0 t mm) Compact with reduced mounting area Illuminance output: digital 16-bit output (Minimum detectable illuminance: 0.1 lx) Small aperture compatible I2C output compatible (proximity sensor, ambient light sensor) LED and ambient light sensor combined in a single package (3.94 × 2.36 × 1.35 t mm) Illuminance output: digital 16-bit output (Minimum detectable illuminance: 0.1 lx) Small aperture compatible I2C output compatible (proximity sensor, ambient light sensor) GP2AP030A00F 52 Ambient light sensor portion RecomADC Peak mended conversion emission Output illuminance time wavelength resolution range Tint (bit) λp Ev (ms) (nm) (lx) TYP. VCC (V) Topr (°C) Dissipation current Icc (µA) TYP. 5.5 –35 to +85 65 100 940 0.02 to 10 000 16 100 2.2 to 5.5 –30 to +85 100 100 940 0.1 to 100 000 16 30 2.2 to 5.5 –30 to +85 100 100 940 0.1 to 100 000 16 30 GP2AP007A00F Detecting distance Lon (mm) TYP. GP2AP008T00F Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. PROXIMITY/GESTURE SENSOR WITH INTEGRATED AMBIENT LIGHT SENSOR / UV LIGHT SENSORS OPTO ★ Under ■ Proximity/Gesture Sensor with Integrated Ambient Light Sensor Absolute maximum ratings Model No. GP2AP054A00F development Features LED and ambient light sensor combined in a single package (4.0 × 2.1 × 1.25 t mm) Simultaneous operation of the gesture recognition and illuminance functions is possible Low power consumption mode is available for the proximity sensor Capable of holding a total of 4 gesture detection results VCC (V) Topr (°C) 5.5 –35 to +85 (Ta = 25°C) Electro-optical characteristics Proximity/gesture Ambient light sensor portion Dissipasensor portion Dissipation tion RecomADC current Detecting Peak current mended conversion Icc distance emission Output Icc illuminance time (Gesture) Lon wavelength resolution (µA) range Tint (µA) (mm) (bit) λp TYP. Ev (ms) TYP. TYP. (nm) (lx) TYP. 100 320 100 940 0.02 to 10 000 16 30 ■ UV Light Sensors (Ta = 25°C) Absolute maximum ratings Model No. ★GA1AUV100WP Features Detects only UV rays contained within sunlight (no sensitivity to visible light) Built-in ambient light sensor Compact size: 2.0 × 1.6 × 0.6 t mm I2C output compatible VCC (V) I2C voltage VI2C (V) 2.2 to 5.5 1.7 to Vcc Electro-optical characteristics Built-in Dissipation ADC clock current Output conversion Topr frequency Icc resolution time (°C) fosc (µA) (bit) (ms) (MHz) TYP. TYP. TYP. –35 to +85 65 2.62 16 25 Recommended illuminance range Ev (lx) Sunlight (AM1.5 equivalent) Optoelectronics GP2AP054A00F UV: 0 to 200 000 Illuminance: 0 to 120 000 GA1AUV100WP Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 53