World's smallest (2016 size) low phase noise Crystal Oscillator developed for digital audio

June 1, 2016
Nihon Dempa Kogyo Co., Ltd.
Representative Director &
Chairman of the Board,
President and CEO
Toshiaki Takeuchi
World's smallest*1 (2016 size) low phase noise Crystal Oscillator
developed for digital audio
Nihon Dempa Kogyo Co., Ltd. (NDK) has developed the world’s smallest (2016 size) low
phase noise crystal oscillator (NZ2016SDA) for digital audio. This product exhibits an overall
frequency tolerance*2 of Max. ±50 x 10-6, which is the same value as existing NDK low phase
noise crystal oscillator in the same size, but boasts the world's highest-level phase noise*3 of
“-164 dBc/kHz -169 dBc/10 kHz”.
As high-resolution sound gains popularity, digital audio equipment (such as smart phones,
portable audio players and car audio systems) is increasingly expected to provide higher-quality
sound. Suppressing the phase noise of the master clock in the digital-analog converters (DAC) of
these devices will enhance the accuracy of conversion to analog signals, thereby enabling better
sound quality.
In response to demand for higher-quality sound from digital audio equipment, NDK has
combined its proprietary crystal technology with optimal IC for lower phase noise to achieve the
world’s highest-level low phase noise for master clocks used in digital-analog converters. The
product can also be used with a low-voltage power supply (Min. +1.8 V) that can be integrated
into compact digital equipment such as portable audio players, thereby contributing to improved
sound quality. For matching other size equipment , NDK has developed two different size
products (2520 size : NZ2520SDA and 3225 size : NZ3225SDA) with identical specifications at
the same time.
*1: Based on NDK research as of May 2016
*2: Stability with normal temperature (25 °C) tolerance, frequency temperature stability and
Frequency / voltage coefficient.
*3: Based on NDK research as of May 2016
【Appearance】
【Samples and Mass production】
Sample delivery has already begun and mass production is scheduled to start in October 2016.
【Product specifications】
Model
NZ2016SDA
Dimensions
2.0 x 1.6 x Max. 0.8 mm
Nominal Frequency Range
20 MHz to 50 MHz
Output
CMOS
Operating Temperature Range
-40 °C to +85 °C
Overall Frequency Tolerance
Max. ±50 x 10-6
Supply Voltage [VCC]
+1.8 V to +3.3 V
Current Consumption
Max. 15 mA
-164 dBc/Hz @ 1 kHz offset
-169 dBc/Hz @ 10 kHz offset
Phase Noise Characteristics
(Nominal Frequency: 49.152 MHz;
Supply Voltage [VCC]: +3.3 V;
Temperature: +25 °C)
【Phase noise characteristic sample data (Comparison to Existing product)】
Conditions: Nominal frequency: 49.152 MHz; Supply voltage [VCC]: +3.3 V;
Temperature: +25 °C
For more information on the product, contact:
【Contact Info】
Sales representative / Nihon Dempa Kogyo Co., Ltd.
e-Mail : [email protected]