5KP

M5KP5.0A – M5KP110CA(e3)
Available
5,000 Watt Transient Voltage Suppressor
(TVS) Protection Device
Screening in
reference to
MIL-PRF-19500
available
DESCRIPTION
This Transient Voltage Suppressor series M5KP5.0A – M5KP110CA provides a range of
standoff voltage options from 5.0 to 110 V in unidirectional, bidirectional, RoHS compliant, and
SnPb solder dipped options. Multiple advanced screening levels are available for enhanced
reliability. Clamping action is almost instantaneous. As a result, they provide effective
protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4, as well as transients
caused by inductive switching and RFI. They also protect from secondary lightning effects per
61000-4-5 at the class levels specified below.
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
•
•
•
•
•
•
•
Available in both unidirectional and bidirectional configurations
3σ lot norm screening performed on standby current I D
100% surge tested devices
Various screening in reference to MIL-PRF-19500. Refer to HiRel Non-Hermetic Product Portfolio
for more details on the screening options
(See part nomenclature for all options.)
High reliability controlled devices with wafer fabrication and assembly lot traceability
Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS compliant versions are available
Case 5A
(DO-204AR)
Package
Also available in:
P600 package
(commercial plastic
axial-leaded)
5KP5.0e3 – 5KP250CAe3
DO-13 package
APPLICATIONS / BENEFITS
•
•
•
•
•
•
•
•
•
(metal axial-leaded)
LC6.5A – LC170A
Selections for 5.0 to 110 volts stand-off voltage (V WM )
Economical TVS series for thru-hole mounting
This M5KPxxx series has a significantly reduced body diameter than the 5KPxxx commercial series
for a smaller size footprint often required for aviation and other applications
Pico- to nano-second response time
Protection from transients due to inductive switching and RFI
Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively
Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedance:
Class 1, 2, 3, 4: M5KP5.0A to M5KP110CA
Class 5: M5KP5.0A to M5KP110CA (short distance)
Class 5: M5KP5.0A to M5KP36CA (long distance)
Secondary lightning protection per IEC61000-4-5 with 12 ohms source impedance:
Class 1 & 2: M5KP5.0A to M5KP110CA
Class 3: M5KP5.0A to M5KP78CA
Class 4: M5KP5.0A to M5KP40CA
Secondary lightning protection per IEC61000-4-5 with 2 ohms source impedance:
Class 2: M5KP5.0A to M5KP70CA
Class 3: M5KP5.0A to M5KP36CA
Class 4: M5KP5.0A to M5KP18CA
RF01010, Rev. B (9/13/13)
©2013 Microsemi Corporation
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
Page 1 of 7
M5KP5.0A – M5KP110CA(e3)
MAXIMUM RATINGS @ 25 ºC unless otherwise noted
Parameters/Test Conditions
Symbol
Value
TJ and
TSTG
R ӨJL
-65 to +150
20
o
R ӨJA
P PP
80
5000
o
PD
6
(1)
1.56
< 100
<5
3.5
260
Junction and Storage Temperature
Thermal Resistance, Junction to Lead @ 0.375 inch
(9.5 mm) lead length from body
(1)
Thermal Resistance, Junction to Ambient
(2)
Peak Pulse Power Dissipation
10/1000 µs
Steady-State Power Dissipation @ TL = 25 ºC
0.375 inch (9.5 mm) from body
Unidirectional
Tclamping (0 volts to V (BR) min, theoretical)
Bidirectional
(3)
Forward Voltage
Solder Temperature @ 10 s
VF
Unit
o
C
C/W
C/W
W
W
ps
ns
V
o
C
2
Notes: 1. When mounted on FR4 PC board with 4 mm copper pads (1 oz) and track width 1 mm, length 25 mm.
2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figure 1 and 2).
3. At 100 amp peak impulse of 8.3 ms half-sine wave (unidirectional only).
MECHANICAL and PACKAGING
•
•
•
•
•
•
•
CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0
TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750, method 2026.
MARKING: Part number
POLARITY: Cathode indicated by band. No cathode band on bidirectional devices.
TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
WEIGHT: Approximately 1.4 grams
See Package Dimensions on last page.
PART NOMENCLATURE
M
5K
P
5.0
C
A
Reliability Level*
M
MA
MX
MXL
(*see HiRel Non-Hermetic
Product Portfolio)
RoHS Compliance
e3 = RoHS compliant
Blank = non-RoHS compliant
5% Voltage Tolerance
Polarity
C = Bi-directional
Blank = Unidirectional
5 Kilowatt Rating
Encapsulated Plastic
Package
RF01010, Rev. B (9/13/13)
(e3)
Stand-off Voltage Rating
(see Electrical Characteristics
table)
©2013 Microsemi Corporation
Page 2 of 7
M5KP5.0A – M5KP110CA(e3)
SYMBOLS & DEFINITIONS
Definition
Symbol
α V(BR)
VW M
PPP
V (BR)
ID
IPP
VC
I (BR)
Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in
temperature that caused it expressed in %/°C or mV/°C.
Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that
may be continuously applied over the standard operating temperature.
Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The
impulse power is the maximum-rated value of the product of I PP and V C .
Breakdown Voltage: The voltage across the device at a specified current I (BR) in the breakdown region.
Standby Current: The current through the device at rated stand-off voltage.
Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse
current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an
external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives.
Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an
impulse current (I PP ) for a specified waveform.
Breakdown Current: The current used for measuring Breakdown Voltage V (BR) .
RF01010, Rev. B (9/13/13)
©2013 Microsemi Corporation
Page 3 of 7
M5KP5.0A – M5KP110CA(e3)
ELECTRICAL CHARACTERISTICS @ 25 ºC
PART NUMBER
(Note 2)
M5KP5.0A
M5KP6.0A
M5KP6.5A
M5KP7.0A
M5KP7.5A
M5KP8.0A
M5KP8.5A
M5KP9.0A
M5KP10A
M5KP11A
M5KP12A
M5KP13A
M5KP14A
M5KP15A
M5KP16A
M5KP17A
M5KP18A
M5KP20A
M5KP22A
M5KP24A
M5KP26A
M5KP28A
M5KP30A
M5KP33A
M5KP36A
M5KP40A
M5KP43A
M5KP45A
M5KP48A
M5KP51A
M5KP54A
M5KP58A
M5KP60A
M5KP64A
M5KP70A
M5KP75A
M5KP78A
M5KP85A
M5KP90A
M5KP100A
M5KP110A
REVERSE
STANDOFF
VOLTAGE
V WM
(Note 1)
V
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
BREAKDOWN
VOLTAGE
V (BR) @
I (BR)
V
6.40 – 7.00
6.67 – 7.37
7.22 – 7.98
7.78 – 8.60
8.33 – 9.21
8.89 – 9.83
9.44 – 10.4
10.0 – 11.1
11.1 – 12.3
12.2 – 13.5
13.3 – 14.7
14.4 – 15.9
15.6 – 17.2
16.7 – 18.5
17.8 – 19.7
18.9 – 20.9
20.0 – 22.1
22.2 – 24.5
24.4 – 26.9
26.7 – 29.5
28.9 – 31.9
31.1 – 34.4
33.3 – 36.8
36.7 – 40.6
40.0 – 44.2
44.4 – 49.1
47.8 – 52.8
50.0 – 55.3
53.3 – 58.9
56.7 – 62.7
60.0 – 66.3
64.4 – 71.2
66.7 – 73.7
71.1 – 78.6
77.8 – 86.0
83.3 – 92.1
86.7 – 95.8
94.4 – 104.0
100 – 111
111 – 123
122 - 135
mA
50
50
50
50
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
MAXIMUM
CLAMPING
VOLTAGE
V C @ I PP
MAXIMUM
STANDBY
CURRENT I D
@ V WM
MAXIMUM
PEAK PULSE
CURRENT
I PP
(FIG. 2)
MAXIMUM
TEMPERATURE
COEFFICIENT OF
V (BR)
α V(BR)
V
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.5
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113
121
126
137
146
162
177
µA
2000*
5000
2000
1000
250
150
50
20
15
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
A
543
485
447
417
388
367
347
325
294
274
251
232
215
206
192
181
172
154
141
128
119
110
103
94
86
78
72
69
65
61
57
53
52
49
44
41
40
36
34
31
28
mV/ ºC
4.0
4.0
4.0
5.0
6.0
6.0
7.0
8.0
9.0
10
11
12
13
15
16
18
19
22
24
27
29
30
35
38
40
45
49
51
55
60
64
69
70
75
84
90
94
102
109
122
132
NOTES:
1.
Transient voltage suppressors are normally selected with reverse “stand-off voltage” (VWM) which should be equal to or greater than the
dc or continuous peak operating voltage level.
2.
For the bidirectional M5KP5.0CA double the ID maximum standby current to 4000 μA .
RF01010, Rev. B (9/13/13)
©2013 Microsemi Corporation
Page 4 of 7
M5KP5.0A – M5KP110CA(e3)
Ppp – Peak Pulse Power (kW)
GRAPHS
t d – Pulse Width (sec.)
Pulse Current in Percent of IPP
FIGURE 1
Peak Pulse Power Rating Curve
t – Time – ms
Test waveform parameters: tr=10 µs, tp=1000 µs
FIGURE 2
Pulse Waveform for 10/1000 µs Exponential Surge
RF01010, Rev. B (9/13/13)
©2013 Microsemi Corporation
Page 5 of 7
M5KP5.0A – M5KP110CA(e3)
C, Capacitance (pf)
GRAPHS (continued)
V (BR) – Reverse Breakdown Voltage (V)
FIGURE 3
Typical Junction Capacitance
RF01010, Rev. B (9/13/13)
©2013 Microsemi Corporation
Page 6 of 7
M5KP5.0A – M5KP110CA(e3)
PACKAGE DIMENSIONS
Dim
LL
BL
BD
LD
RF01010, Rev. B (9/13/13)
©2013 Microsemi Corporation
Dimensions
Inch
Millimeters
Min
Max
Min
Max
0.750
19.05
0.365 0.385
9.27
9.78
0.235 0.255
5.97
6.48
0.047 0.053 1.194 1.346
Page 7 of 7