OPTO ■ IR IR DETECTING UNIT FOR REMOTE CONTROL LINEUP (CLASSIFIED BY FORM) Detecting Unit for Remote Control Lineup (Classified by Form) Type IR detecting unit for remote control Package Detection Form position*1 (from PCB) Lead L bend with shield case (holder) 16.0 mm*2 Features Compact size Compact size, Strengthened resistance to electromagnetic induction noise (Mesh type) 12.0 mm*3 Compact size Compact size, Strengthened resistance to electromagnetic induction noise (Mesh type) 6.8 mm*4 Compact size Compact size, Strengthened resistance to electromagnetic induction noise (Mesh type) Lead straight with shield case (holder) 19.0 mm 9.6 mm Compact size, Strengthened resistance to electromagnetic induction noise (Mesh type) Compact size Compact size, Strengthened resistance to electromagnetic induction noise (Mesh type) Holderless Lead straight 6.0 mm bend*5 Lead L 5.3 mm *1 L ead straight: Distance from lens center to mounting board upper surface No mesh lead L bend: Distance from tip of lens to mounting board upper surface Mesh-type lead L bend: Distance from tip of mesh to mounting board upper surface *2 Mesh type (strengthened resistance to electromagnetic induction noise): 16.4 mm *3 Mesh type: 12.4 mm *4 Mesh type: 7.2 mm *5 Mesh type: 5.3 mm 62 Operating voltage Model No. 3 to 5 V GP1UE28XK0VF series 5V GP1UM28XK0VF series 3 to 5 V GP1UE28RK0VF series 5V GP1UM28RK0VF series 3 to 5 V GP1UE27XK0VF series 5V GP1UM27XK0VF series 3 to 5 V GP1UE27RK0VF series 5V GP1UM27RK0VF series 3 to 5 V GP1UE26XK0VF series 5V GP1UM26XK0VF series 3 to 5 V GP1UE26RK0VF series 5V GP1UM26RK0VF series 3 to 5 V GP1UE29QK0VF series 5V GP1UM29QK0VF series 3 to 5 V GP1UE28YK0VF series 5V GP1UM28YK0VF series 3 to 5 V GP1UE28QK0VF series 5V GP1UM28QK0VF series 3 to 5 V GP1UX31QS series 5V GP1UX51QS series 3 to 5 V GP1UX31RK series 5V GP1UX51RK series OPTO Detecting Units for Remote Control Absolute maximum ratings Type Series No. GP1UM26XK0VF With shield case (holder), 5 V drive With shield case (holder), 5 V drive, Strengthened resistance to electromagnetic induction noise With shield case (holder), 3 to 5 V drive With shield case (holder), 3 to 5 V drive, Strengthened resistance to electromagnetic induction noise Holderless, 5 V drive, Strengthened resistance to electromagnetic induction noise Holderless, 3 to 5 V drive, Strengthened resistance to electromagnetic induction noise (Ta = 25°C) Electrical characteristics VOH VOL fo Icc (V) (V) (kHz) (mA)*1 MAX. MIN. MAX. TYP. Vcc (V) Topr (°C) Operating voltage (V) 0 to 6.0 –10 to +70 4.5 to 5.5 0.6 (0.65) Vcc–0.5 Size (mm) 0.45 *3 5.6 × 9.6 × 6.8 5.6 × 9.6 × 12.0 GP1UM27XK0VF 0 to 6.0 –10 to +70 4.5 to 5.5 0.6 (0.65) Vcc–0.5 0.45 *3 GP1UM28XK0VF 0 to 6.0 –10 to +70 4.5 to 5.5 0.6 (0.65) Vcc–0.5 0.45 *3 5.6 × 9.6 × 16.0 GP1UM28YK0VF 0 to 6.0 –10 to +70 4.5 to 5.5 0.6 (0.65) Vcc–0.5 0.45 *3 5.6 × 8.6 × 12.5(9.6)*2 GP1UM26RK0VF 0 to 6.0 –10 to +70 4.5 to 5.5 0.6 (0.65) Vcc–0.5 0.45 *3 5.6 × 9.6 × 7.2 5.6 × 9.6 × 12.4 5.6 × 9.6 × 16.4 GP1UM27RK0VF 0 to 6.0 –10 to +70 4.5 to 5.5 0.6 (0.65) Vcc–0.5 0.45 *3 GP1UM28RK0VF 0 to 6.0 –10 to +70 4.5 to 5.5 0.6 (0.65) Vcc–0.5 0.45 *3 GP1UM28QK0VF 0 to 6.0 –10 to +70 4.5 to 5.5 0.6 (0.65) Vcc–0.5 0.45 *3 GP1UM29QK0VF 0 to 6.0 –10 to +70 4.5 to 5.5 0.6 (0.65) Vcc–0.5 0.45 *3 GP1UE26XK0VF 0 to 6.0 –10 to +70 2.7 to 5.5 0.4 Vcc–0.5 0.45 *3 5.6 × 9.6 × 6.8 GP1UE27XK0VF 0 to 6.0 –10 to +70 2.7 to 5.5 0.4 Vcc–0.5 0.45 *3 5.6 × 9.6 × 12.0 GP1UE28XK0VF 0 to 6.0 –10 to +70 2.7 to 5.5 0.4 Vcc–0.5 0.45 *3 5.6 × 9.6 × 16.0 GP1UE28YK0VF 0 to 6.0 –10 to +70 2.7 to 5.5 0.4 Vcc–0.5 0.45 *3 5.6 × 8.6 × 12.5(9.6)*2 GP1UE26RK0VF 0 to 6.0 –10 to +70 2.7 to 5.5 0.4 Vcc–0.5 0.45 *3 5.6 × 9.6 × 7.2 5.6 × 9.6 × 12.4 5.6 × 9.6 × 16.4 5.6 × 9.0 × 12.5(9.6)*2 5.6 × 16.2 × 21.9(19)*2 GP1UE27RK0VF 0 to 6.0 –10 to +70 2.7 to 5.5 0.4 Vcc–0.5 0.45 *3 GP1UE28RK0VF 0 to 6.0 –10 to +70 2.7 to 5.5 0.4 Vcc–0.5 0.45 *3 GP1UE28QK0VF 0 to 6.0 –10 to +70 2.7 to 5.5 0.4 Vcc–0.5 0.45 *3 GP1UE29QK0VF 0 to 6.0 –10 to +70 2.7 to 5.5 0.4 Vcc–0.5 0.45 *3 GP1UX51QS 0 to 6.0 –10 to +70 4.5 to 5.5 0.6 Vcc–0.5 0.45 *3 5.5 × 5.3 × 7.5 GP1UX51RK 0 to 6.0 –10 to +70 4.5 to 5.5 0.6 Vcc–0.5 0.45 *3 5.5 × 5.3 × 7.5 5.5 × 5.3 × 7.5 5.5 × 5.3 × 7.5 GP1UX31QS 0 to 6.0 –10 to +70 4.5 to 5.5 0.4 Vcc–0.5 0.45 *3 GP1UX31RK 0 to 6.0 –10 to +70 4.5 to 5.5 0.4 Vcc–0.5 0.45 *3 Terminal layout Center Vcc 5.6 × 9.0 × 12.5(9.6)*2 5.6 × 16.2 × 21.9(19)*2 IR Devices ■ IR IR DETECTING UNITS FOR REMOTE CONTROL Center GND * A voltage regulator circuit is built-in but may be affected by the usage environment. Install with an externally mounted C and R as a power supply filter. *1 When no signal is input (during input light). *2 Figures in parentheses indicate the distance to the light detection center. *3 fo = 32.75/36/36.7/38/40 kHz Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 63