FM120-M+ FM220-S WILLAS THRU THRU 2.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SMA-S PACKAGE SOD-123+ PACKAGE FM1200-M+ FM2200-S Pb Free Product Package outline Features • Batch process design, excellent power dissipation offers Package outline Features better reverse leakage current and thermal resistance. profile surface in orderoffers to • Lowprocess • Batch design, mounted excellent application power dissipation SOD-123H optimize board space. better reverse leakage current and thermal resistance. power loss, high efficiency. • Low • Low power loss, high efficiency. current capability, forward voltage drop. • High • High current capability, lowlow forward voltage drop. surge capability. • High surge capability. • High overvoltage protection. • Guardring for for overvoltage protection. • Guardring high-speed switching. • Ultra high-speed switching. • Ultra epitaxial planar chip, metal silicon junction. • Silicon epitaxial planar chip, metal silicon junction. • Silicon parts meet environmental standards • Lead-free parts meet environmental standards of of • Lead-free 0.146(3.7) SMA-S 0.130(3.3) 0.012(0.3) Typ. 0.213(5.4) 0.197(5.0) 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) 0.063(1.6) MIL-STD-19500 /228 MIL-STD-19500 /228 product for packing code suffix "G" • RoHSpackage • Pb-Free is available Halogen free packing RoHS product forproduct packingforcode suffixcode ”G” suffix "H" 0.106(2.7) 0.091(2.3) 0.055(1.4) Mechanical data Halogen free product for packing code suffix “H” 0.040(1.0) 0.024(0.6) • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 Mechanical data 0.031(0.8) Typ. Method 2026 retardant rated flame • Epoxy:UL94-V0 • Polarity : Indicated cathode band • Case : Molded plastic, by DO-214AC / SMA-S Mounting Position : Any • • Terminals : Solder plated, solderable per • Weight : MIL-STD-750, Approximated Method 0.011 gram 2026 0.031(0.8) Typ. 0.071(1.8) 0.060(1.5) 0.040(1.0) Typ. 0.040 (1.0) Typ. Dimensions in inches and (millimeters) Dimensions in inches and (millimeters) • Polarity : Indicated by cathode band MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Mounting Position : Any Ratings at 25℃ ambient temperature unless otherwise specified. • Weight Approximated gram Single phase :half wave, 60Hz, 0.05 resistive of inductive load. For capacitive load, derate current by 20% Electrical Maximum ratings and RATINGS PARAMETER 13 30 15 50 surge current MaximumForward RMS Voltage 8.3ms single sine-wave 21 (JEDEC 28 methode) 35 VRMS half 14 20 VDC V R = V RRM T J = 25 OC current Rectified Current MaximumReverse Average Forward IO V R = V RRM T J = 125 OC Junction to ambient Peak Forward Surge Current 8.3 ms single half sine-wave IFSM Thermal resistance superimposed on rated load (JEDEC method) Junction to case Typical Junction Capacitance (Note 1) Storage temperature Operating Temperature Range Storage Temperature Range *1 SYMBOLS V RRM (V) V RMS*2 (V) CHARACTERISTICS 20 at 1.0A14 FM220-S Maximum Forward Voltage DC 20 FM230-S 40 RatedFM240-S DC Blocking Voltage 28 40 @T A=125℃ FM245-S 45 31.5 45 FM250-S 50 35 50 FM260-S 60 42 60 NOTES: 30 VF 0.50 IR FM280-S 80 56 80 100 70 100 FM2150-S 150 105 150 0.90 FM2200-S 200 140 200 0.92 2014-03 18 80 10 100 56 70 60 80 100 50 I R1.0 0.5 150 -65 Volts Volts Volts 200 Amps mA 10 R θJA 30 R θJC C40 J 120 T STG 2.0 115 A 120 150 200 50 105 A 140 64 O C/W 32 O C/W Amps ℃/W pF 160 +1 -55 to +150 O PF C ℃ - 65 to +175 ℃ 0.50 -55 to +125 0.70 0.85 0.9 0.5 0.92 Volts 10 *1 Repetitive Peak Reverse Voltage mAmp *2 RMS Voltage FM2100-S 2012-06 16I O 60 I FSM 42 SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 0.70 2- Thermal Resistance From Junction to Ambient 40 f=1MHzRΘJA and applied 4V DC reverse voltage CJ -55 to +125 TJ Operating TSTG *3 *4 VF VR temperature (V) (V) T J, ( OC) 21at @T A=25℃ 30 30 Current Maximum Average Reverse 14 40 See Fig.1 VRRM Typical Thermal (Note 2) Diode Resistance junction capacitance 12 20 Maximum Recurrent Peak Reverse Voltage Maximum DC Blocking Voltage T A=25 oC unless otherwise noted) FM130-MH FM140-MH FM150-MH FM160-MH FM1150-MH SYMBOL FM120-MH FM1200-MH UNIT UNIT Symbol FM180-MH TYP. MAX. MIN. FM1100-MH CONDITIONS Marking Code Forward rectified current Characteristics (AT 0.85 *3 Continuous Reverse Voltage -55 to +150 *4 Maximum Forward Voltage @I F=2.0A WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. FM120-M+ FM220-S WILLAS THRU THRU 2.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SMA-S PACKAGE SOD-123+ PACKAGE Features FM1200-M+ FM2200-S Pb Free Product Rating and characteristic curves (FM220-S THRU FM2200-S) Package outline better reverse leakage current and thermal resistance. FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE • Low profile surface mounted application in order to optimize board space. • Low power loss, high efficiency. 2.4 • High current capability, low forward voltage drop. 2.0 • High surge capability. • Guardring for overvoltage protection. 1.6 • Ultra high-speed switching. 1.2 • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of 0.8 MIL-STD-19500 /228 0.4 • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" 0 CHARACTERISTICS 0.146(3.7) 0.130(3.3) INSTANTANEOUS FORWARD CURRENT,(A) S S 100 120 140 160 180 200 ratedTEMPERATURE,(°C) flame retardant • Epoxy : UL94-V0LEAD • Case : Molded plastic, SOD-123H , FIG.3-MAXIMUM NON-REPETITIVE FORWARD • Terminals :Plated terminals, solderable per MIL-STD-750 20V ~ 45V 10 80V ~ 100V 3.0 150V~200V 1.0 0.040(1.0) 0.024(0.6) PEAK FORWARD SURGE CURRENT,(A) • Polarity : Indicated by cathode band Mounting Position : Any • 40 • Weight : Approximated 0.011 gram TJ=25 C Pulse Width 300us 1% Duty Cycle Dimensions in inches and (millimeters) .01 .1 .3 .5 .7 .9 1.1 1.3 1.5 FORWARD VOLTAGE,(V) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 8.3ms Single Half TJ=25 C Ratings at 25℃ ambient temperature unless otherwiseSine specified. Wave 20 Single phase half wave, 60Hz, resistive of inductive load. JEDEC method For capacitive load, derate current by 20% 10 RATINGS FM180-MHREVERSE FM1100-MH FM1150-MH FM1200-MH UNIT FIG.5 - TYPICAL SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH Marking Code 0 VRRM 1 5 Voltage 10 Maximum Recurrent Peak Reverse 50 NUMBER OF CYCLES AT 60Hz VRMS Maximum RMS Voltage Maximum DC Blocking Voltage VDC 12 20 13 30 14 40 100 15 50 16 CHARACTERISTICS 18 10 60 80 100 115 150 120 200 Volts 14 21 28 35 4220V~45V 20 30 40 50 60 100 IO FIG.4-TYPICAL JUNCTION CAPACITANCE Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3 ms single half sine-wave 700 superimposed on rated load (JEDEC method) JUNCTION CAPACITANCE,(pF) IFSM Typical Junction Capacitance (Note 1) CJ Operating Temperature Range TJ 500 Storage Temperature Range 400 -55 to +125 TSTG CHARACTERISTICS 300 RΘJA Typical600 Thermal Resistance (Note 2) 56 70 105 140 Volts 80 100 150 200 Volts 1.0 30 Amp Amp T40 J=125°C 120 1.0 ℃/W PF -55 to +150 ℃ - 65 to +175 0.1 ℃ FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH TJ=25°C VF Maximum Forward Voltage at 1.0A DC 200 Maximum Average Reverse Current at @T A=25℃ 0.50 IR @T A=125℃ Rated 100 DC Blocking Voltage 50V~200V 10 REVERSE LEAKAGE CURRENT, (mA) 0.031(0.8) Typ. 0.1 50 0.071(1.8) 0.056(1.4) 50V ~ 60V 0.031(0.8) Typ. SURGE CURRENT Method 2026 30 0.012(0.3) Typ. 50 020 M2 ~F 5- 24 FM 0 20 40 60 80 Mechanical data SOD-123H FIG.2-TYPICAL FORWARD S 025 FM S~ 0- 22 FM AVERAGE FORWARD CURRENT,(A) • Batch process design, excellent power dissipation offers 0.70 0.9 0.85 0.92 0.5 0.01 Volts mAmp 10 NOTES: 0 .01 .05 .1 .5 1 5 10 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. REVERSE VOLTAGE,(V) 2- Thermal Resistance From Junction to Ambient 2012-06 2014-03 50 100 0.001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. FM120-M+ FM220-S WILLAS THRU THRU 2.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SMA-S PACKAGE SOD-123+ PACKAGE FM2200-S FM1200-M+ Pb Free Product Package outline Features Pinning information design, excellent power dissipation offers • Batch process better reverse leakage current and thermal resistance. surface mounted application in order to • Low profile Pin Simplified optimize board space. • Low power loss, high efficiency. High current capability, low forward voltage drop. • Pin1 cathode • High surge capability. 1 Pin2 anode • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of MIL-STD-19500 /228 Marking • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" Type numberdata Mechanical SOD-123H outline Symbol 0.146(3.7) 0.130(3.3) 2 0.012(0.3) Typ. 1 2 0.071(1.8) 0.056(1.4) Marking code 0.040(1.0) 0.024(0.6) : UL94-V0 rated flame retardant • Epoxy FM220-S SK22 : Molded plastic, SOD-123H • CaseFM230-S SK23 , • Terminals :Plated terminals, solderable per MIL-STD-750 FM240-S SK24 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 FM245-S SK24 Dimensions in inches and (millimeters) • Polarity : Indicated by cathode band FM250-S SK25 Position : Any • Mounting FM260-S SK26 FM280-S SK28 • Weight : Approximated 0.011 gram FM2100-S S210 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS FM2150-S S215 Ratings at 25℃ ambient temperature unless otherwise specified. FM2200-S S220 Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% SuggestedRATINGS solder pad layoutSYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNI Marking Code Maximum Recurrent Peak Reverse Voltage VRRM 12 20 13 30 14 40 15 50 16 60 18 80 10 100 115 150 120 200 Volts Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 105 140 Volts Maximum DC Blocking Voltage VDC 20 C 30 40 50 60 80 100 150 200 Volts Maximum Average Forward Rectified Current IO IFSM Peak Forward Surge Current 8.3 ms single half sine-wave A superimposed on rated load (JEDEC method) 1.0 30 RΘJA Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) CJ Operating Temperature Range TJ Storage Temperature Range -55 to +125 ℃/W PF -55 to +150 ℃ - 65 to +175 ℃ PACKAGE A B C SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT SMA-S 0.063 (1.60) 0.059 (1.50) 0.110 (2.80) Volts 0.9 0.92 VF 0.50 0.70 0.85 CHARACTERISTICS Maximum Forward Voltage at 1.0A DC Maximum Average Reverse Current at @T A=25℃ @T A=125℃ Rated DC Blocking Voltage Dimensions in inches and (millimeters) TSTG Amp 40 120 B Amp 0.5 IR mAm 10 NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. Reel packing 2- Thermal Resistance From Junction to Ambient PACKAGE SMA-S 2012-06 2014-03 REEL (pcs) COMPONENT SPACING (m/m) BOX (pcs) INNER BOX (m/m) REEL DIA, (m/m) 7" 2,000 4.0 20,000 183*170*183 178 382*356*387 160,000 15.5 13" 7,500 4.0 15,000 337*337*37 330 350*330*360 120,000 14.2 REEL SIZE CARTON SIZE (m/m) CARTON (pcs) APPROX. GROSS WEIGHT (kg) WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. FM120-M+ FM220-S WILLAS THRU THRU 2.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SMA-S PACKAGE SOD-123+ PACKAGE FM2200-S FM1200-M+ Pb Free Product Package outline Features Packing information • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. P0 • Low power loss, high efficiency. • High current capability, low forward voltage drop. P 1 d • High surge capability. • Guardring for overvoltage protection. E high-speed switching. • Ultra • Silicon epitaxial planar chip, metal silicon junction. F • Lead-free parts meet environmental standards of • 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) MIL-STD-19500 /228 RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" B W Mechanical data 0.040(1.0) 0.024(0.6) • Epoxy : UL94-V0 A rated flame retardant P • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 • Polarity : Indicated by cathode band • Mounting Position : Any • Weight : Approximated 0.011 gram Dimensions in inches and (millimeters) D2 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS D1 T 25℃ ambient temperature unless otherwise specified. Ratings at Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% W1 RATINGS FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH D Marking Code Maximum Recurrent Peak Reverse Voltage VRRM 12 20 13 30 14 40 15 50 16 60 18 80 10 100 115 150 120 200 Volts Maximum RMS Voltage VRMS 14 21 28 35 42 70 105 140 Volts Maximum DC Blocking Voltage VDC 20 30 40 50 60 56 unit:mm 80 100 150 200 Volts Maximum Average Forward Rectified Current IO IFSM Item Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Symbol Tolerance 1.0 SMA-S 30 Amps Amps 2.90 A 0.1 40 5.50 B 0.1 120 Typical Junction Capacitance (Note 1)Carrier length CJ Carrier depth C to +125 0.1 2.10 -55 -55 to +150 Operating Temperature Range TJ Sprocket hole d 0.1 - 65 1.50 to +175 Storage Temperature Range TSTG 330.00 13" Reel outside diameter D 2.0 50.00 13" Reel inner diameter D1 min CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH 178.00 7" Reel outside diameter D 2.0 0.9 Maximum Forward Voltage at 1.0A DC 0.92 VF 0.50 0.70 0.85 62.00 7" Reel inner diameter D1 min 0.5 Maximum Average Reverse Current at @T A=25℃ 13.00 Feed hole diameter IR 0.5 D2 10 @T A=125℃ Rated DC Blocking Voltage 1.75 Sprocket hole position E 0.1 5.50 Punch hole position F 0.1 NOTES: 4.00 Punch hole pitch P 0.1 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 4.00 P0 0.1 Sprocket hole pitch 2- Thermal Resistance From Junction to Ambient 2.00 0.1 Embossment center P1 0.23 Overall tape thickness T 0.1 12.00 W 0.3 Tape width 18.00 Reel width W1 1.0 Typical Thermal Resistance (Note 2) Carrier width C RΘJA ℃/W PF ℃ ℃ UNIT Volts mAmps Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. 2012-06 2014-03 WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP.