ϴϬϱϬ^>dϭ EWE'ĞŶĞƌĂůWƵƌƉŽƐĞdƌĂŶƐŝƐƚŽƌƐ PRIMARY CHARACTERISTICS PC 300mW VCEO 25V IC 500mA hFE 200~350 TJ,Max 150℃ SOT-23 PACKAGE Marking Code : J3Y Ex : 8050SLT1 COLLECTOR 3 J3Y 1 BASE 2 EMITTER FEATURES MECHANICAL DATA Collector Current: IC=0.5A Case：Molded plastic,SOT-23 Moisture Sensitivity Level 1 Polarity：Shown above Terminals :Plated terminals, solderable per MIL-STD-750,Method 2026 Epoxy : UL94-V0 rated flame retardant MAXIMUM RATINGS (Ta=25℃ unless otherwise noted) Symbol Parameter Value Unit VCBO Collector-Base Voltage 40 V VCEO Collector-Emitter Voltage 25 V VEBO Emitter-Base Voltage 5 V IC Collector Current 500 mA PC Collector Power Dissipation 300 mW Thermal Resistance From Junction To Ambient 417 ℃/W Tj Junction Temperature 150 ℃ Tstg Storage Temperature -55～+150 ℃ RΘJA 2015.09 www.willas.com.tw Rev.J02 ϴϬϱϬ^>dϭ EWE'ĞŶĞƌĂůWƵƌƉŽƐĞdƌĂŶƐŝƐƚŽƌƐ ELECTRICAL CHARACTERISTICS (Ta=25℃ unless otherwise specified) Parameter Symbol Test conditions Min Typ Max Unit 40 V IC=1mA, IB 0 V(BR)CEO = 25 V V(BR)EBO IE=100μA, IC=0 5 V Collector cut-off current ICBO V= CB=40 V , IE 0 0.1 μA Collector cut-off current ICEO = VCB= 20V , I E 0 0.1 μA Emitter cut-off current IEBO = VEB= 5V , IC 0 0.1 μA hFE(1) VCE= 1V, I C= 50mA 0 hFE(2) VCE= 1V, I C= 500mA Collector-base breakdown voltage V(BR)CBO Collector-emitter breakdown voltage Emitter-base breakdown voltage DC current gain IC= 100μA, IE=0 50 Collector-emitter saturation voltage VCE(sat) IC=500 mA, IB= 50mA 0.6 V Base-emitter saturation voltage VBE(sat) IC=500 mA, IB= 50mA 1.2 V VCE= 6V, I C= 20mA fT Transition frequency 150 f=30MHz MHz Ty pical Characteristics h S tatic Characteristic 100 hFE Ta=100℃ 300uA 60 DC CURRENT GAIN (mA) 350uA IC COLLECTOR CURRENT COMMON EMITTER VCE=1V COMMON EMITTER Ta=25℃ 400uA 80 C 1000 250uA 200uA 40 150uA Ta=25℃ 100 100uA 20 IB=50uA 10 0 0 4 8 12 COLLECTOR-EMITTER VOLTAGE 2015.09 16 VCE 20 1 3 10 (V) www.willas.com.tw 100 30 COLLECTOR CURRENT IC 500 (mA) Rev.J02 ϴϬϱϬ^>dϭ EWE'ĞŶĞƌĂůWƵƌƉŽƐĞdƌĂŶƐŝƐƚŽƌƐ C 500 C C 1.2 BASE-EMITTER SATURATION VOLTAGE VBEsat (V) COLLECTOR-EMITTER SATURATION VOLTAGE VCEsat (mV) 300 100 Ta=100℃ Ta=25℃ 30 Ta=25℃ 0.8 Ta=100℃ 0.4 β=10 β=10 10 0.0 1 10 3 500 100 30 COLLECTOR CURRENT IC 1 30 10 100 COLLECTOR CURRENT IC 100 f=1MHz IE=0/ IC=0 100 Ta=25℃ Cib (pF) 30 30 C Ta=25℃ 10 CAPACITANCE IC (mA) COMMON EMITTER VCE=1V COLLECTOR CURRENT 500 (mA) C C 500 3 (mA) Ta=100℃ 3 1 Cob 10 3 0.3 0.1 0.2 0.4 0.6 0.8 1 0.1 1.0 T 1000 1 0.3 C PC 400 10 3 REVERSE VOLTAGE BASE-EMMITER VOLTAGE VBE (V) V a 20 (V) T VCE=6V TRANSITION FREQUENCY fT COLLECTOR POWER DISSIPATION PC (mW) (MHz) Ta=25℃ 100 10 200 100 0 10 100 30 COLLECTOR CURRENT 2015.09 300 IC 0 (mA) 25 50 75 AMBIENT TEMPERATURE www.willas.com.tw 100 Ta 125 150 (℃) Rev.J02 ϴϬϱϬ^>dϭ EWE'ĞŶĞƌĂůWƵƌƉŽƐĞdƌĂŶƐŝƐƚŽƌƐ Outline Drawing .102(2.64) .063(1.60) .047(1.20) .122(3.10) .106(2.70) .083(2.10) .006(0.15)MIN. SOT-23 .008(0.20) .003(0.08) .95 TYP .080(2.04) .070(1.78) .020(0.50) .012(0.30) .049(1.25) .035(0.89) .004(0.10)MAX. Dimensions in inches and (millimeters) 2015.09 www.willas.com.tw Rev.E Rev.J02 ϴϬϱϬ^>dϭ EWE'ĞŶĞƌĂůWƵƌƉŽƐĞdƌĂŶƐŝƐƚŽƌƐ SOT-23 Suggested Soldering Pad Layout 0.0355 (0.90) 0.0435 0.0315 (0.80) (1.10) 0.0435 (1.10) Dimensions in inches and (millimeters) 2015.09 www.willas.com.tw Rev.A Rev.J02 ϴϬϱϬ^>dϭ EWE'ĞŶĞƌĂůWƵƌƉŽƐĞdƌĂŶƐŝƐƚŽƌƐ Reel Taping Sepecification - Surface Mount Device/SOT-23 Reel Packing PACKAGE SOT-23 PER REEL REEL DIA BOX SIZE PER BOX CARTION PER CARTION GROSS WEIGHT EA (m/m) (m/m) EA (m/m) EA (Kg) 3,000 178 192*195*136 30,000 440*410*410 360,000 15.0 Direction tape is pulled PO P1 d P E F w B A C D W1 D2 ITEM Carrier width Carrier length Carrier depth Sprocket hole Reel outside diameter Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Tape width Reel width D1 SYMBOL SPECIFICATIONS (mm) SPECIFICATIONS (inch) A B C d D D1 D2 E F P P0 P1 W W1 3.1 ±0.1 2.85 ±0.1 1.40 ±0.1 1.5 + 0.1/-0 180 + 0/-3 60 + 1/-0 13 ±0.2 1.75 ±0.1 3.5 ±0.05 4.0 ±0.1 4.0 ±0.1 2.0 ±0.05 8.0 ±0.2 9.0 ±0.3 0.122 ±0.004 0.112 ±0.004 0.055 ±0.004 0.059 + 0.004/-0 7.083 + 0/-0.118 2.361 + 0.039/-0 0.512 ±0.008 0.069 ±0.004 0.138 ±0.002 0.157 ±0.004 0.157 ±0.004 0.079 ±0.002 0.315 ±0.008 0.354 ±0.012 NOTE: 1.Devices are packed in accordance with EIAJ stand ETX-7001 and specifications listed above. 2.Available on 7 inch ( 3,000 c.t. ) or 13 inch ( 10,000 c.t. ) diameter reels. 2015.09 www.willas.com.tw Rev.J02 ϴϬϱϬ^>dϭ EWE'ĞŶĞƌĂůWƵƌƉŽƐĞdƌĂŶƐŝƐƚŽƌƐ Ordering Information: Device PN 8050SLT1 G(1) ‐WS Packing Tape&Reel: 3 Kpcs/Reel Note: (1) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.09 www.willas.com.tw Rev.J02