Ϯ^ϵϵϵ< ;EWEͿWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ PRIMARY CHARACTERISTICS SOT-89 PC 500mW VCEO 25V IC 1.0A VCE(sat) 0.4V hFE 200–400 TJ,Max 150℃ PACKAGE 1. BASE 2. COLLECTOR 3. EMITTER MARKING CODE : CK FEATURES MECHANICAL DATA Low Collector-Emitter Saturation Case：Molded plastic, SOT-89 Voltage Polarity：As Above Marked Mini Power Type Package Terminals :Plated terminals, Excellent DC Current Gain Linearity solderable per MIL-STD-750,Method Moisture Sensitivity Level 1 2026 Epoxy : UL94-V0 rated flame retardant MAXIMUM RATINGS (Ta=25℃ unless otherwise noted) Value Unit VCBO Collector-Base Voltage 30 V VCEO Collector-Emitter Voltage 25 V Symbol VEBO Parameter Emitter-Base Voltage 5 V IC Collector Current 1 A PC Collector Power Dissipation 500 mW Thermal Resistance From Junction To Ambient 250 ℃/W Tj Junction Temperature 150 ℃ Tstg Storage Temperature -55~+150 ℃ RθJA ELECTRICAL CHARACTERISTICS (Ta=25℃ unless otherwise specified) Parameter Symbol Test conditions Min Typ Max Unit Collector-base breakdown voltage V(BR)CBO IC=100µA,IE=0 30 V Collector-emitter breakdown voltage V(BR)CEO IC=1mA,IB=0 25 V Emitter-base breakdown voltage V(BR)EBO IE=100µA,IC=0 5 V Collector cut-off current ICBO VCB=30V,IE=0 0.1 µA Emitter cut-off current IEBO VEB=5V,IC=0 0.1 µA DC current gain hFE(1)* VCE=1V, IC=100mA 200 400 hFE(2)* VCE=1V, IC=1A Collector-emitter saturation voltage VCE(sat)* IC=1A,IB=0.1A 50 0.4 V Base-emitter saturation voltage VBE(sat)* IC=1A,IB=0.1A 1.2 V Base -emitter voltage VBE* VCE=6V, IC=10mA Transition frequency fT VCE=6V,IC=10mA 130 MHz VCB=6V, IE=0, f=1MHz 22 pF Cob Collector output capacitance *Pulse test: pulse width ≤350μs, duty cycle≤ 2.0%. 2015.01 www.willas.com.tw 0.6 0.7 V Rev. J01 P1 Ϯ^ϵϵϵ< ;EWEͿWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ Outline Drawing SOT-89 .181(4.60) .173(4.39) .063(1.60) .055(1.40) .061REF (1.55)REF .102(2.60) .091(2.30) .167(4.25) .154(3.91) .023(0.58) .016(0.40) .047(1.2) .031(0.8) .060TYP (1.50)TYP .197(0.52) .013(0.32) .118TYP (3.0)TYP Dimensions in inches and (millimeters) 2015.01 www.willas.com.tw .017(0.44) .014(0.35) Rev.C Rev. J01 P2 Ϯ^ϵϵϵ< ;EWEͿWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ SOT-89 Suggested Soldering Pad Layout .102(2.60) .173(4.40) .055(1.40) .126(3.20) 45° .055(1.40) .059(1.50) .075(1.90) .031(0.80) .035(0.90) Dimensions in inches and (millimeters) 2015.01 www.willas.com.tw RevA Rev. J01 P3 Ϯ^ϵϵϵ< ;EWEͿWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ Reel Taping Specification - Surface Mount Device/SOT-89 ITEM SYMBOL SPECIFICATIONS(mm) SPECIFICATIONS(inch) Carrier width A 4.90±0.12 0.193±0.0047 Carrier length Carrier depth Sprocket hole Reel outside diameter Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width B C d D D1 D2 E F P P0 P1 T W 4.80±0.16 2.00±0.013 178±0.14 1.55±0.11 8±0.12 13±0.14 1.75±0.15 5.5±0.05 8.0±0.17 4.0±0.11 2.0±0.05 2.3±0.05 12.0±0.12 0.189±0.0062 0.079±0.0051 7.008±0.0055 0.059±0.0043 0.315±0.0047 0.512±0.0055 0.069±0.0059 0.217±0.0019 0.315±0.0067 0.157±0.0043 0.079±0.0019 0.091±0.0019 0.472±0.0047 Reel width W1 16.8±0.13 0.661±0.0051 2015.01 www.willas.com.tw Rev. J01 P4 Ϯ^ϵϵϵ< ;EWEͿWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ Ordering Information: Device PN 2SD999CK‐T(1)G(2)‐WS Packing Tape&Reel: 1 Kpcs/Reel Note: (1) Packing code, Tape & Reel Packing (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.01 www.willas.com.tw Rev. J01 P5