DDdϯϵϬϰD ;EWEͿWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ PRIMARY CHARACTERISTICS PC 0.1W VCEO 40V IC 0.2A VCE(sat) 0.2V hFE 40~300 TJ,Max 150℃ SOT-723 PACKAGE ● Body Marking Example Marking :1 3 2 1 1. BASE 2. EMITTER 3. COLLECT25 1 FEATURES MECHANICAL DATA omplementary to MMBT3906M Case：Molded plastic,SOT-723 Small Package Polarity：As Above Marked Moisture Sensitivity Level 1 Terminals :Plated terminals, solderable per MIL-STD-750,Method 2026 Epoxy : UL94-V0 rated flame retardant MAXIMUM RATINGS (Ta=25℃ unless otherwise noted ) Symbol Parameter Value Unit VCBO Collector-Base Voltage 60 V VCEO Collector-Emitter Voltage 40 V VEBO Emitter-Base Voltage 6 V IC Collector Current -Continuous 0.2 A PC Power Dissipation 0.1 W Thermal Resistance from Junction to Ambient 1250 ℃/W TJ Junction Temperature 150 ℃ Tstg Storage Temperature -55~+150 ℃ RΘJA ELECTRICAL CHARACTERISTICS (Ta=25℃ unless otherwise specified) Parameter Symbol Test conditions Min Typ Max Unit Collector-base breakdown voltage V(BR)CBO IC=10µA,IE=0 60 V Collector-emitter breakdown voltage V(BR)CEO IC=1mA,IB=0 40 V Emitter-base breakdown voltage V(BR)EBO IE=10µA,IC=0 6 Collector cut-off current Emitter cut-off current DC current gain Collector-emitter saturation voltage Base-emitter saturation voltage Transition frequency ICEX VCE=30V,VEB(off)=3V IEBO VEB=5V,IC=0 hFE(1) VCE=1V,IC=0.1mA hFE(2) VCE=1V,IC=1mA 70 hFE(3) VCE=1V,IC=10mA 100 hFE(4) VCE=1V,IC=50mA 60 nA 100 nA 40 300 VCE(sat)1 IC=10mA,IB=1mA 0.2 V VCE(sat)2 IC=50mA,IB=5mA 0.3 V VBE(sat)1 IC=10mA,IB=1mA 0.85 V VBE(sat)2 IC=50mA,IB=5mA fT VCE=20V,IC=10mA,f=100MHz Output capacitance Cob VCB=5V,IE=0,f=1MHz Input capacitance Cib VEB=0.5V,IC=0,f=1MHz Noise figure NF Delay time td Rise time tr Storage time ts Fall time tf 2015.03 V 50 0.65 0.95 300 V MHz 4 8 pF pF VCE=5V,IC=0.1mA,f=1MHz,RS=1kΩ 5 dB VCC=3V,VBE(off)=-0.5V, IC=10mA,IB1=1mA 35 ns 35 ns VCC=3V,IC=10mA IB1=IB2=1mA 200 ns 50 ns www.willas.com.tw Rev.:0ϭ P1 DDdϯϵϬϰD ;EWEͿWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ .034(0.85) .030(0.45) .006(0.15) Dimensions in inches and (millimeters) 2015.03 .049(1.25) .045(1.15) .007(0.17) .003(0.07) .031(0.80)Typ. .011(0.27) SOT-723 .006(0.15)MIN. .049(1.25) .045(1.15) .030(0.75) .034(0.85) Outline Drawing www.willas.com.tw Rev.D Rev.:0ϭ P2 DDdϯϵϬϰD ;EWEͿWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ 6277DSHDQG5HHO 2015.03 www.willas.com.tw Rev.:0ϭ P3 DDdϯϵϬϰD ;EWEͿWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ Ordering Information: Device PN DDdϯϵϬϰD ‐T(1) G(2)‐WS Note: (1) Packing code, Tape & Reel Packing Tape&Reel: ϴ Kpcs/Reel (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.03 www.willas.com.tw Rev.:0ϭ P4