pj 075ch smt

For more information, please visit the product page
|
For information on related products, view External Power Supplies
date
05/17/2016
page
1 of 3
MODEL: PJ-075CH-SMT │ DESCRIPTION: DC POWER JACK
FEATURES
•
•
•
•
•
1.0 mm center pin
3.5 A rating
low profile
surface mount (SMT)
internal switch
RoHS
SPECIFICATIONS
parameter
conditions/description
min
typ
rated input voltage
max
24
Vdc
rated input current
contact resistance1
between terminal and mating plug
between terminal in a closed circuit
insulation resistance
at 500 Vdc
voltage withstand
at 50/60Hz for 1 minute
any direction for 10 seconds
operating temperature
-25
life
mΩ
mΩ
500
Vac
3
kg
500
g
85
°C
5,000
flammability rating
UL94V-0
RoHS
2011/65/EU
Notes:
A
50
30
MΩ
0.3
terminal strength
3.5
100
insertion/withdrawal force
units
cycles
1. When measured at a current of less than 100 mA/1 kHz
2. Add suffix “-TR” to the model number for tape & reel packaging
SOLDERABILITY
parameter
conditions/description
min
typ
max
units
reflow soldering
see reflow profile
255
260
265
°C
270
260
250
240
217
180
120
120
60
50
°C
70
60
140
120
250
180
240
Time (second)
cui.com
340
300
380
360
430
420
480
For more information, please visit the product page
|
For information on related products, view External Power Supplies
CUI Inc │ MODEL: PJ-075CH-SMT │ DESCRIPTION: DC POWER JACK
date 05/17/2016 │ page 2 of 3
MECHANICAL DRAWING
units: mm[inches]
tolerance:
X.X ±0.2mm
X.XX ±0.1mm
X.XXX ±0.05mm
MATERIAL
PLATING
center pin
copper
nickel
terminal 1
brass
silver
terminal 2
copper alloy
silver
terminal 3
brass
silver
shield
brass
silver
plastic
PA6T
6.00 0.236
2.40 0.094
9.0 0.354
4.70 0.185
4.8 0.189
(5 PLCS)
2.30 0.091
3.70 0.146
0.50 0.020
(2 PLCS)
1
3.7 0.146
(2 PLCS)
3
1.3 0.051
0.0
-0.1
(2 PLCS)
2.50 0.098
4.00 0.157
8.25 0.325
0.2 (2 PLCS)
0.2 0.008
1.3 0.051
4.9 0.193
(2 PLCS)
2.25 0.089
(2 PLCS)
10.8 0.425
8.25 0.325
(2 PLCS)
2.50 0.098
(5 PLCS)
1.4 0.055
+0.1
-0.0
(2 PLCS)
0.2 0.008
3
2
2
2.25 0.089
0.2 (2 PLCS)
2.50 0.098
4.2 0.165
(2 PLCS)
1
5.4 0.213
(2 PLCS)
4.00 0.157
PCB LAYOUT
TOP VIEW
SCHEMATIC
MATING PLUG
Jack Insertion Depth: 6.4mm
Note:
Model
PJ-075CH-SMT
Center Pin
Ø1.0 mm
All specifications measured at 10~35°C, humidity at 45~85%, under standard atmospheric pressure, unless otherwise noted.
cui.com
For more information, please visit the product page
|
For information on related products, view External Power Supplies
CUI Inc │ MODEL: PJ-075CH-SMT │ DESCRIPTION: DC POWER JACK
date 05/17/2016 │ page 3 of 3
REVISION HISTORY
rev.
description
date
1.0
initial release
03/16/2012
1.01
increased voltage rating
05/17/2016
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
[email protected]
CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to
affect its safety or effectiveness.