FM0540-N FM0560-N 0.5A Surface Mount Schottky Barrier Rectifiers - 40V~60V PRIMARY CHARACTERISTICS VRRM 40V,60V IO 0.5A VF 0.5V,0.65V TJ,Max 125℃,150℃ SOD-323-L Marking Code : C,E Ex : FM0540-N Pin1 Pin2 C FEATURES PACKAGE cathode anode 1 2 MECHANICAL DATA Batch process design,excellent power Case：Molded plastic,SOD-323-L dissipation offersbetter reverse Polarity：Shown above leakage current and thermal Terminals :Plated terminals, resistance solderable per MIL-STD-750,Method Low profile surface mounted 2026 application in order to optimize board space. Epoxy : UL94-V0 rated flame retardant Low power loss,high efficiency High current capability, low forward voltage drop High surge capability Ultra high-speed switching Moisture Sensitivity Level 1 Maximum ratings and Electrical Characteristics (AT T=25A℃ unless otherwise noted) SYMBOL VRRM FM0540-N 40 FM0560-N 60 UNITS Volts Maximum RMS Volts VRMS 28 42 Volts Maximum DC Blocking Voltage VDC 40 60 RATINGS Maximum Recurrent Peak Reverse Voltage Maximum Average Forward Current Peak Forward Surge Current IFM (surge):8.3 ms single half Typical Thermal Resistance (Note 2) Type Diodel Junction Capacitance(Note 1) 0.5 Amps IFSM 15 Amps RΘJA 90 CJ 120 ℃/W pF TJ Operating Storage Temperature Range Storage Temperature Range Volts IO -55~125 -55~150 -55~150 TSTG ℃ ℃ ELECTRICAL CHARACTERISTICS (At TA = 25℃ unless otherwise noted) CHARACTERISTICS Marking Code Maximum Forward Voltage @IF= 0.5A Reverse current VR=VRRM Tj=25℃ V R=VRRM Tj=100℃ SYMBOL VF FM0540-N C 0.5 IR FM0560-N E 0.65 0.5 10 UNITS Volts mAmps Note 1 : f=1MHz and applied 4V DC reverse voltage 2 : Thermal Resistance From Junction to Ambient 2015.ϭϬ www.willas.com.tw Rev.&0Ϯ FM0540-N FM0560-N 0.5A Surface Mount Schottky Barrier Rectifiers - 40V~60V RATING AND CHARACTERISTIC CURVES FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE FIG.2-TYPICAL FORWARD 50 60 05 -N -N 40 05 0.2 0.1 0 0 20 40 60 80 100 120 140 160 180 200 AMBIENT TEMPERATURE,( C) FIG.3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 10 1.0 0.5 TJ=25 C 60V FM 0.3 40V 0.4 INSTANTANEOUS FORWARD CURRENT,(A) 0.5 FM AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 0.6 Pulse Width 300us 1% Duty Cycle 0.1 PEAK FORWARD SURGE CURRENT,(A) 15 .01 12 .1 .3 .5 .7 .9 1.1 1.3 1.5 FORWARD VOLTAGE,(V) 9 8.3ms Single Half TJ=25 C Sine Wave 6 JEDEC method 3 FIG.5 - TYPICAL REVERSE 0 CHARACTERISTICS 1 5 50 10 100 100 NUMBER OF CYCLES AT 60Hz REVERSE LEAKAGE CURRENT, (mA) FIG.4-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE,(pF) 350 300 250 200 150 100 10 1.0 TJ=75 C .1 TJ=25 C 50 0 .01 .05 .1 .5 1 REVERSE VOLTAGE,(V) 2015.ϭϬ 5 10 50 100 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) www.willas.com.tw Rev.&0Ϯ FM0540-N 0.5A Surface Mount Schottky Barrier Rectifiers - 40V~60V Outline Drawing FM0560-N SOD-323-L .106(2.70) .091(2.30) .012(0.30)Typ. .057(1.45) .041(1.05) .006(0.15)Typ. .047(1.20) .031(0.80) .016(0.40) Typ. .016(0.40) Typ. Dimensions in inches and (millimeters) Rev.B 2015.ϭϬ www.willas.com.tw Rev.&0Ϯ FM0540-N FM0560-N 0.5A Surface Mount Schottky Barrier Rectifiers - 40V~60V Suggested Soldering Pad Layout SOD-323-L 0.051 0.059 (1.50) (1.30) 0.039 (1.00) Dimensions in inches and (millimeters) 2015.ϭϬ www.willas.com.tw RevA Rev.&0Ϯ FM0540-N FM0560-N 0.5A Surface Mount Schottky Barrier Rectifiers - 40V~60V Reel Taping Specification - Surface Mount Device/SOD-323-L PACKAGE PER REEL EA REEL DIA (m/m) PER BOX EA PER CARTION EA SOD-323-L 3000 178 30,000 240,000 2015.ϭϬ www.willas.com.tw Rev.&0Ϯ FM0540-N 0.5A Surface Mount Schottky Barrier Rectifiers - 40V~60V FM0560-N Ordering Information: Device PN Part Number ‐T(1)G(2)‐WS Note: (1) Packing code, Tape & Reel Packing Packing Tape&Reel: 3 Kpcs/Reel (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.ϭϬ www.willas.com.tw Rev.&0Ϯ