CLD-2040-X

CLD-2040-X
Dual Directional Coupler
Data Sheet Revision Date: 12/18/2015
The most important thing we build is trust
DESCRIPTION:
Cobham Signal & Control Solutions’ forward and reverse dual directional stripline
couplers, are available in 6dB, 10dB, 20dB, and 30dB coupling values. These units
feature high directivity and low VSWR and are conservatively rated to ensure the most
reliable service and performance. The directional couplers on this page are unequalled
in terms of size and performance. The volume of these couplers makes them ideally
suited for applications involving high density packaging.
SPECIFICATIONS:
Parameter
Specification
Unit of Measure
2.0 – 4.0
GHz
20
dB
Primary / Secondary VSWR (Max)
1.20
Ratio
Insertion Loss Above Coupling Loss (Max)
0.40
dB
“L”
2.4 (61.0)
Inches (mm)
“H”
0.5 (12.7)
Inches (mm)
Frequency Range (Min)
Directivity (Min)
OUTLINE DRAWING:
FEATURES:
TYPE “SMA” FEMALE
(4) PLS.
•
Rugged 4 hole connector construction insures
superiority
•
50 Ohm termination is supplied on each unit delivered.
Power rating is 1 Watt at 25 ˚C
•
Coupling includes frequency flatness & coupling
measurement in reference to the input port. Coupling
is standard on these units
.62”
J3
J4
J1
.38”
TYP.
J2
“L”
“H”
.38”
OUTLINE CASE STYLE CLD
Revised Date: 12/18/2015
(732) 460-0212
www.cobham.com/CSCS
1
CLD-2040-X
Dual Directional Coupler
NOTES:
ENVIRONMENTAL SPECIFICATIONS*:
Please Contact the Factory for Custom Specifications
MIL-E-5400, MIL-STD-202, MIL-E-16400
Operating Temp: -55°C to +85°C
MECHANICAL SPECIFICATIONS:
Case Style:
CLD Outline
Connectors:
SMA Female per MIL-C-39012
Weight:
19g max
Storage Temp: -65°C to +150°C
Humidity: MIL-STD-202F, M103, Cond B
Shock: MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
SCREENING:
Vibration: MIL-STD-202F, M204, Cond B
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65 °C to +100 °C, 10 cycles
Thermal Shock: MIL-STD-202F, M107, Cond A
* Compliant by design, verification optional
Hermetically-sealed units are fine and gross leak checked
per MIL-STD-883, Method 1014.
Optional High-Rel screening available upon request. Contact
the factory to discuss your screening requirements.
ISO 9001:2008 and AS9100 certified
For further information please contact:
Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make
changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales
representative to verify that the information in this data sheet is current before using this product. CSCS
does not assume any responsibility or liability arising out of the application or use of any product or service
described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a
product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any
other of the intellectual rights of CSCS or of third parties.
Cobham Signal & Control Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212
Fax: (732) 460-0214
[email protected]
Copyright 2015, Cobham Signal & Control Solutions. All rights reserved.
Revised Date: 12/18/2015
(732) 460-0212
www.cobham.com/CSCS
2
Similar pages