ACSM-2139

ACSM-2139
Bolt Channel Schottky Detector
Data Sheet Revision Date: 12/22/2015
The most important thing we build is trust
DESCRIPTION:
Static protection and easy mounting are important features of these high
sensitivity detectors. They offer excellent octave or broadband RF performance
and rugged construction for harsh environments. The static protection virtually
eliminates damage due to handling or from video transients. The Bolt Channel
package allows for very simple and reliable screw-on mounting. The modified
package saves additional space by eliminating one thru hole. The standard output
polarity is positive. Negative output versions are available with slightly lower
sensitivity.
SPECIFICATIONS:
Parameter
Specification
Unit of Measure
17 – 18
GHz
1700
mV/mW
Flatness vs. Frequency (max)
0.5
±dB
Typical TSS
-51
dBm
9
pF
Frequency Range (min)
Sensitivity (min)
Nominal Video Capacitance
OUTLINE DRAWING:
FEATURES:
0.280±.005
0.079±.002
Ø0.096±.003 THRU
(2) PLCS.
0.160
DETAIL
NOT TO SCALE
0.020 MIN
0.004
MIN
0.135±.010
(2) PLCS.
0.080±.001
•
Contains hermetically sealed modules, internal RF
matching, DC return, and RF bypass capacitor
•
The video port is protected from static or transient
charges
•
Input impedance matching
•
Models may be chosen for broadband RF performance
of for optimized narrow bands
COLORED DOT
INPUT
(2) PLCS.
0.205±.003
0.126±.004
SEE DETAIL
0.062±.002
STANDARD CASE STYLE C3
(Optional Case Styles – C8, C15)
Revised Date: 12/22/2015
(732) 460-0212
www.cobham.com/CSCS
1
ACSM-2139
Bolt Channel Schottky Detector
NOTES:
ENVIRONMENTAL SPECIFICATIONS*:
Maximum input power: +20 dBm
MIL-E-5400, MIL-STD-202, MIL-E-16400
Sensitivity is measured into an open circuit load
(>10 k ohm).
Operating Temp: -55°C to +125°C
Standard bias is 100 uA.
Humidity: MIL-STD-202F, M103, Cond B
Storage Temp: -65°C to +150°C
Video capacitance is used for RF bypass. This value can be
changed if required for video response time. Contact the
factory for more information.
Shock: MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
This part number is also available with a
zero bias schottky diode.
Vibration: MIL-STD-202F, M204, Cond B
Due to higher impedance, the zero bias schottky will
exhibit less sensitive TSS (typically a 3 dB reduction)
* Compliant by design, verification optional
Thermal Shock: MIL-STD-202F, M107, Cond A
The temperature performance of the zero bias schottky is
poor when operating at low input power levels.
SCREENING:
Internal Visual per MIL-STD-883, Method 2017
Temperature Cycle: -65°C to +100°C, 10 cycles
OPTIONAL HIGH-REL SCREENING
(Ref MIL-PRF-38534):
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
PART NUMBER ORDERING INFORMATION:
Add desired polarity suffix: “N” for Negative, “P” for Positive (Ex: ACSM-2139N)
Add “Z” for zero biased schottky option (Ex: ACSM-2139NZ)
Add case style suffix: “M51” (Ex: ACSM-2139NZM51)
Add “-RC” suffix: RoHS-compliant (Ex: ACSM-2139NZM51-RC)
ISO 9001:2008 and AS9100 certified
For further information please contact:
Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make
changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales
representative to verify that the information in this data sheet is current before using this product. CSCS
does not assume any responsibility or liability arising out of the application or use of any product or service
described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a
product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any
other of the intellectual rights of CSCS or of third parties.
Cobham Signal & Control Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212
Fax: (732) 460-0214
[email protected]
Copyright 2015, Cobham Signal & Control Solutions. All rights reserved.
Revised Date: 12/22/2015
(732) 460-0212
www.cobham.com/CSCS
2
Similar pages