ACSP-2551

ACSP-2551
Padded Zero Bias Schottky Detector
Data Sheet Revision Date: 12/22/2015
The most important thing we build is trust
DESCRIPTION:
Detectors with internal attenuators are often requested. They are typically used
in circuits where an improved RF match is needed or where the power levels
applied are higher than is typical for low level detectors. Frequently, they are used
in laboratory applications with associated instruments such as broadband power
leveling or monitoring. These detectors are all zero bias, making them convenient
to use.
SPECIFICATIONS:
Parameter
Specification
Unit of Measure
Frequency Range (min)
0.01 – 18
GHz
Flatness vs. Frequency (max)
0.5/octave
±dB
-44
dBm
7
dB
400
mV/mW
Typical TSS
Internal Attenuation
Sensitivity (min)
OUTLINE DRAWING:
FEATURES:
•
Contains hermetically sealed modules, internal RF
matching, DC return, and RF Bypass capacitor
•
The video port is protected from static or transient
charges
•
Input impedance matching
•
Models may Be chosen for BroadBand RF performance
of for optimized narrow Bands
STANDARD CASE STYLE C3
(Optional Case Styles – C15, C32)
Revised Date: 12/22/2015
(732) 460-0212
www.cobham.com/CSCS
1
ACSP-2551
Padded Zero Bias Schottky Detector
NOTES:
ENVIRONMENTAL SPECIFICATIONS*:
Maximum input power: +23 dBm
MIL-E-5400, MIL-STD-202, MIL-E-16400
Sensitivity is measured into an open circuit load
(>10k ohm).
Operating Temp: -55°C to +125°C
The temperature performance of the zero Bias schottky is
poor when operating at low input power levels.
Humidity: MIL-STD-202F, M103, Cond B
SCREENING:
Storage Temp: -65°C to +150°C
Shock: MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
Internal Visual per MIL-STD-883, Method 2017
Vibration: MIL-STD-202F, M204, Cond B
Temperature Cycle: -65°C to +100°C, 10 cycles
Thermal Shock: MIL-STD-202F, M107, Cond A
OPTIONAL HIGH-REL SCREENING
(Ref MIL-PRF-38534):
* Compliant by design, verification optional
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
PART NUMBER ORDERING INFORMATION:
Add desired polarity suffix: “N” for Negative, “P” for Positive (Ex: ACSP-2551N)
Add “Z” for zero Biased schottky (Ex: ACSP-2551NZ)
Add desired case style suffix: “C3” (Ex: ACSP-2551NZC3)
Add “-RC” suffix: RoHS-compliant (Ex: ACSP-2551NZC3-RC)
ISO 9001:2008 and AS9100 certified
For further information please contact:
Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make
changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales
representative to verify that the information in this data sheet is current before using this product. CSCS
does not assume any responsibility or liability arising out of the application or use of any product or service
described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a
product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any
other of the intellectual rights of CSCS or of third parties.
Cobham Signal & Control Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212
Fax: (732) 460-0214
[email protected]
Copyright 2015, Cobham Signal & Control Solutions. All rights reserved.
Revised Date: 12/22/2015
(732) 460-0212
www.cobham.com/CSCS
2
Similar pages