LA5744TPGEVB_TEST_PROCEDURE.PDF - 382.0 KB

Test Procedure for the LA5744TPGEVB Evaluation Board

Connect the test setup as shown in Figure 1.
Apply an input voltage, Vin=4.5-28V.
Apply Iout(load)=0A.
Check that Vout=5±5%Vdc.
Set Iout to desired level, 0A-2A.
Check that Vout=5±5%Vdc under desired operating condition.
Turn off the load.
Turn off Vin.
End of the test.
2/01/2013
1
www.onsemi.com
2/01/2013
2
www.onsemi.com