ACLM-4700

ACLM-4700
Pin Diode Limiter
Data Sheet Revision Date: 12/21/2015
The most important thing we build is trust
DESCRIPTION:
PIN diode limiters are built to protect sensitive circuit elements such as receiver
front ends or detectors. They reduce high power inputs to a low level that can be
tolerated by the next component.
Limiters may be categorized as conventional or feedback types.
Our family of conventional limiters typically exhibits leakage levels up to +20dBm
with recovery times less than 40nsec. These models handle up to 1000W peak
power levels and cover the frequency range form 100MHz to 26GHz.
Custom models with higher power handling available.
SPECIFICATIONS:
Parameter
Standard
1K opt
Unit of Measure
Frequency Range (min)
0.5 – 6
0.5 – 6
GHz
Peak Input Power (max)
100
1000
W
CW Input Power (max)
2
5
W
Peak Flat Leakage (max)
20
20
dBm
CW Flat Leakage (max)
17
17
dBm
Insertion Loss (max)
0.7
0.7
dB
1.5:1
1.5:1
ratio
VSWR (max)
OUTLINE DRAWING:
SMA MALE
(INPUT)
FEATURES:
SMA FEMALE
(OUTPUT)
•
Built to protect sensitive circuit elements such as
receiver front ends or detectors
•
Reduce high power inputs to a low level that can be
tolerated by the next component
•
Custom models with higher power handling are
available
0.312
1.32±.02
STANDARD CASE STYLE C3
(Optional Case Styles – C36, C37, M22)
Solidworks Model: available
Revised Date: 12/21/2015
(732) 460-0212
www.cobham.com/CSCS
1
ACLM-4700
Pin Diode Limiter
NOTES:
ENVIRONMENTAL SPECIFICATIONS*:
CW Leakage is measured at 1W input
MIL-E-5400, MIL-STD-202, MIL-E-16400
Power handling is linearly derated from full power at 25˚C
to zero power at +150˚C
Operating Temp: -55°C to +125°C
Peak power conditions are 1.0µs pulse width and 0.1%
duty cycle
Humidity: MIL-STD-202F, M103, Cond B
Storage Temp: -65°C to +150°C
Shock: MIL-STD-202F, M213, Cond B
SCREENING:
Altitude: MIL-STD-202F, M105, Cond B
Internal Visual per MIL-STD-883, Method 2017
Vibration: MIL-STD-202F, M204, Cond B
Temperature Cycle: -65°C to +100°C, 10 cycles
Thermal Shock: MIL-STD-202F, M107, Cond A
* Compliant by design, verification optional
OPTIONAL HIGH-REL SCREENING
(Ref MIL-PRF-38534):
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
PART NUMBER ORDERING INFORMATION:
Add desired case style suffix: “C3” (Ex: ACLM-4538C3)
Add “R” suffix: Reverse Connector Configuration (Ex: ACLM-4538C3R) (SMA Female Input/SMA Male Output)
Add “1K” suffix: High power handling version: (Ex: ACLM-4538C3R1K)
Add “-RC” suffix: RoHS-compliant (Ex: ACLM-4538C3R1K-RC)
ISO 9001:2008 and AS9100 certified
For further information please contact:
Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make
changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales
representative to verify that the information in this data sheet is current before using this product. CSCS
does not assume any responsibility or liability arising out of the application or use of any product or service
described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a
product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any
other of the intellectual rights of CSCS or of third parties.
Cobham Signal & Control Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212
Fax: (732) 460-0214
[email protected]
Copyright 2015, Cobham Signal & Control Solutions. All rights reserved.
Revised Date: 12/21/2015
(732) 460-0212
www.cobham.com/CSCS
2
Similar pages