S2H4/S2H4R PIN Diode Switch Single Pole, Two Throw Absorptive/Reflective Data Sheet Revision Date: 11/30/2015 The most important thing we build is trust DESCRIPTION: The S2 series of single pole, two throw PIN diode switches span the frequency range of 10MHz to 18GHz and are available with absorptive or reflective inputs. The switches are available in a wide variety of standard frequency ranges from cost-effective narrowband to high-performance broadband. Each switch incorporates a TTL-compatible driver for convenient system integration and operates from +5V and -12V to -18VDC power supplies. All switches incorporate DC blocks at the RF ports. Standard screened switches incorporate epoxy sealed lids and undergo a stringent yet cost effective screening cycle. The switches are also available with hermetic seal and high-rel screening for military and aerospace applications. SPECIFICATIONS: Parameter Absorptive Reflective Unit of Measure 0.01 – 2 0.01 – 2 GHz Insertion Loss (max) 1.9 1.8 dB VSWR (max) (50 ohms) 1.6 1.6 ratio Isolation (min) 80 75 dB Switching Speed (max) *250/400 *250/400 nsec CW RF Power, Survival 30 30 dBm P1dB* 27 27 dBm Frequency Range *Standard bias configuration FEATURES: 0.15 0.15 1.20 1.000 0.35 0.10 TTL-compatible drivers for convenient system integration • Operates on +5V or +15V and -5V or -15V DC power 1.20 supplies 1.000 (see ordering information) 0.35 0.10 • MODEL NUMBER 0.10 0.10 • J1 J2 SN: 0000 0.45 2-PLS 0.90 DC: J3 WWYY G +V -V 0.700 E1 E2 0.90 • • SMA FEMALE 3-PLS Ø0.100 THRU MOUNTING HOLE 4- PLS. Ø0.020 X 0.15 LG SOLDER PIN 5-PLS • 0.700 DC blocks at all MODEL RF NUMBER ports Ruggedized construction J1 0.45 2-PLS Hermetic versions available J2 SN: DC: J3 0000 • WWYY SMA FEMALE All parts receive internal visual (per MIL-STD-883) and 3-PLS temp cycle (-40 °C to 100 °C, 10 cycles) Ø0.100 THRU MOUNTING HOLE Ø0.020 X 0.15 LG SOLDER PIN 5-PLS 4- PLS. Hi-Rel screening available upon request • 30-day lead time on some configurations (contact 0.30 factory 0.150 for4-PLSdetails) 0.15 0.30 0.150 4-PLS 0.15 0.38 REF 0.60 G +V -V 0.60 N/C E1 OUTLINE DRAWING: 0.38 REF OUTLINE CASE STYLE S2 Revised Date: 11/30/2015 (732) 460-0212 www.cobham.com/CSCS 1 S2H4/S2H4R PIN Diode Switch Single Pole, Two Throw, Absorptive/Reflective NOTES: ENVIRONMENTAL SPECIFICATIONS*: DC Bias: (Standard) +5 V +/- 0.5 V @ 80 mA max -15 V +/- 3 V @ 50 mA max MIL-E-5400, MIL-STD-202, MIL-E-16400 DC Bias: (-5 option) +5 V +/- 0.5 V @ 100 mA max -5 V +/- 0.5 V @ 60 mA max Operating Temp: -40 °C to +71 °C Storage Temp: -65 °C to +125 °C DC Bias: (-12 option) +15 V +/- 3 V @ 80 mA max -15 V +/- 3 V @ 50 mA max Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Control: TTL 0 = Low Loss E1 controls J2 – J1 TTL 1 = Isolation E2 controls J3 – J1 Altitude: MIL-STD-202F, M105, Cond B Vibration: MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Single Bit Control: E1=0: (-1 option) E1=1: J2 J3 J3 J2 – – – – J1 J1 J1 J1 Low Loss, Isolation Low Loss, Isolation * Compliant by design, verification optional Absorptive Switch: 50 ohm termination present at J2 and J3 (in isolation mode). Switching speed is defined as 50% TTL to 90% RF (t-on) and 50%. TTL to 10% RF (t-off). Finish: Gold Plate per MIL-G-45204 Chem film per MIL-C-5541 Weight: 20g (max) PART NUMBER ORDERING INFORMATION: : Add “-RC” suffix: RoHS-compliant Add “-H” suffix: Hermetic seal Add “-5” suffix: +/-5 V DC supplies Add “-5-RC” suffix: +/-5 V DC supplies, RoHS-compliant Add “-5-H” suffix: +/-5 V DC supplies, Hermetic seal Add “-12” suffix: +/-15 V DC supplies Add “-12-RC” suffix: +/-15 V DC supplies, RoHS-compliant Add “-12-H” suffix: +/-15 V DC supplies, Hermetic seal Add “-1”: Single bit logic control Add “-1-RC” suffix: Single bit logic control, RoHS-compliant Add “-1-H” suffix: Single bit logic control, Hermetic seal Add “-1-5” suffix: Single bit logic control, +/-5 V DC supplies Add “-1-5-RC” suffix: Single bit logic control, +/-5 V DC supplies, RoHS-compliant Add “-1-5-H” suffix: Single bit logic control, +/-5 V DC supplies, Hermetic seal Add “-1-12” suffix: Single bit logic control, +/-15 V DC supplies Add “-1-12-RC” suffix: Single bit logic control, +/-15 V DC supplies, RoHS-compliant Add “-1-12-H” suffix: Single bit logic control, +/-15 V DC supplies, Hermetic seal ISO 9001:2008 and AS9100 certified For further information please contact: Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales representative to verify that the information in this data sheet is current before using this product. CSCS does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of CSCS or of third parties. Cobham Signal & Control Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Phone: (732) 460-0212 Fax: (732) 460-0214 [email protected] Copyright 2015, Cobham Signal & Control Solutions. All rights reserved. Revised Date: 11/30/2015 (732) 460-0212 www.cobham.com/CSCS 2