S2C6 / S2C6R

S2C6/S2C6R PIN Diode Switch
Single Pole, Two Throw
Absorptive/Reflective
Data Sheet Revision Date: 11/30/2015
The most important thing we build is trust
DESCRIPTION:
The S2 series of single pole, two throw PIN diode switches span the frequency
range of 10MHz to 18GHz and are available with absorptive or reflective inputs.
The switches are available in a wide variety of standard frequency ranges from
cost-effective narrowband to high-performance broadband.
Each switch incorporates a TTL-compatible driver for convenient system
integration and operates from +5V and -12V to -18VDC power supplies. All
switches incorporate DC blocks at the RF ports. Standard screened switches
incorporate epoxy sealed lids and undergo a stringent yet cost effective
screening cycle. The switches are also available with hermetic seal and high-rel
screening for military and aerospace applications.
SPECIFICATIONS:
Parameter
Absorptive
Reflective
Unit of Measure
6 – 10
6 – 10
GHz
Insertion Loss (max)
2.1
1.9
dB
VSWR (max) (50 ohms)
1.7
1.7
ratio
Isolation (min)
70
65
dB
Switching Speed (max)
100
100
nsec
CW RF Power, Survival
30
30
dBm
P1dB*
27
27
dBm
Frequency Range
*Standard bias configuration
FEATURES:
0.15
0.15
1.20
1.000
0.35
0.10
TTL-compatible drivers for convenient system
integration
•
Operates
on +5V or +15V and -5V or -15V DC power
1.20
supplies
1.000 (see ordering information)
0.35
0.10
•
MODEL NUMBER
0.10
0.10
•
J1
J2 SN:
0000
0.45
2-PLS
0.90
DC: J3
WWYY
G
+V
-V
0.700
E1
E2
0.90
•
•
SMA FEMALE
3-PLS
Ø0.100 THRU
MOUNTING HOLE
4- PLS.
Ø0.020 X 0.15 LG
SOLDER PIN
5-PLS
•
0.700
DC blocks at all MODEL
RF NUMBER
ports
Ruggedized
construction
J1
0.45
2-PLS
Hermetic
versions available
J2 SN:
DC: J3
0000
•
WWYY
SMA FEMALE
All parts receive internal
visual (per MIL-STD-883) and
3-PLS
temp cycle (-40
°C
to
100
°C, 10 cycles)
Ø0.100
THRU
MOUNTING HOLE
Ø0.020 X 0.15 LG
SOLDER PIN
5-PLS
4- PLS.
Hi-Rel screening available upon request
•
30-day lead time on some configurations (contact
0.30
factory 0.150
for4-PLSdetails) 0.15
0.30
0.150 4-PLS
0.15
0.38
REF
0.60
G
+V
-V
0.60
N/C
E1
OUTLINE DRAWING:
0.38
REF
OUTLINE CASE STYLE S2
Revised Date: 11/30/2015
(732) 460-0212
www.cobham.com/CSCS
1
S2C6/S2C6R PIN Diode Switch
Single Pole, Two Throw, Absorptive/Reflective
NOTES:
ENVIRONMENTAL SPECIFICATIONS*:
DC Bias: (Standard) +5 V +/- 0.5 V @ 80 mA max
-15 V +/- 3 V @ 50 mA max
MIL-E-5400, MIL-STD-202, MIL-E-16400
DC Bias: (-5 option) +5 V +/- 0.5 V @ 100 mA max
-5 V +/- 0.5 V @ 60 mA max
Operating Temp:
-40 °C to +71 °C
Storage Temp:
-65 °C to +125 °C
DC Bias: (-12 option) +15 V +/- 3 V @ 80 mA max
-15 V +/- 3 V @ 50 mA max
Humidity: MIL-STD-202F, M103, Cond B
Shock: MIL-STD-202F, M213, Cond B
Control: TTL 0 = Low Loss E1 controls J2 – J1
TTL 1 = Isolation E2 controls J3 – J1
Altitude: MIL-STD-202F, M105, Cond B
Vibration: MIL-STD-202F, M204, Cond B
Thermal Shock: MIL-STD-202F, M107, Cond A
Single Bit Control: E1=0:
(-1 option)
E1=1:
J2
J3
J3
J2
–
–
–
–
J1
J1
J1
J1
Low Loss,
Isolation
Low Loss,
Isolation
* Compliant by design, verification optional
Absorptive Switch: 50 ohm termination present at
J2 and J3 (in isolation mode).
Switching speed is defined as 50% TTL to 90% RF (t-on)
and 50%. TTL to 10% RF (t-off).
Finish: Gold Plate per MIL-G-45204
Chem film per MIL-C-5541
Weight: 20g (max)
PART NUMBER ORDERING INFORMATION: :
Add “-RC” suffix: RoHS-compliant
Add “-H” suffix: Hermetic seal
Add “-5” suffix: +/-5 V DC supplies
Add “-5-RC” suffix: +/-5 V DC supplies, RoHS-compliant
Add “-5-H” suffix: +/-5 V DC supplies, Hermetic seal
Add “-12” suffix: +/-15 V DC supplies
Add “-12-RC” suffix: +/-15 V DC supplies, RoHS-compliant
Add “-12-H” suffix: +/-15 V DC supplies, Hermetic seal
Add “-1”: Single bit logic control
Add “-1-RC” suffix: Single bit logic control, RoHS-compliant
Add “-1-H” suffix: Single bit logic control, Hermetic seal
Add “-1-5” suffix: Single bit logic control, +/-5 V DC supplies
Add “-1-5-RC” suffix: Single bit logic control, +/-5 V DC
supplies, RoHS-compliant
Add “-1-5-H” suffix: Single bit logic control, +/-5 V DC
supplies, Hermetic seal
Add “-1-12” suffix: Single bit logic control, +/-15 V DC supplies
Add “-1-12-RC” suffix: Single bit logic control, +/-15 V DC
supplies, RoHS-compliant
Add “-1-12-H” suffix: Single bit logic control, +/-15 V DC
supplies, Hermetic seal
ISO 9001:2008 and AS9100 certified
For further information please contact:
Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make
changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales
representative to verify that the information in this data sheet is current before using this product. CSCS
does not assume any responsibility or liability arising out of the application or use of any product or service
described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a
product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any
other of the intellectual rights of CSCS or of third parties.
Cobham Signal & Control Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212
Fax: (732) 460-0214
[email protected]
Copyright 2015, Cobham Signal & Control Solutions. All rights reserved.
Revised Date: 11/30/2015
(732) 460-0212
www.cobham.com/CSCS
2