S4L3/S4L3R

S4L3/S4L3R PIN Diode Switch
Single Pole, Four Throw
Absorptive/Reflective
Data Sheet Revision Date: 12/07/2015
The most important thing we build is trust
DESCRIPTION:
The S4 series of single pole, four throw PIN diode switches span the frequency
range of 10MHz to 18GHz and are available with absorptive or reflective inputs. The
switches are available in a wide variety of standard frequency ranges from costeffective narrowband to high-performance broadband.
Each switch incorporates a TTL-compatible driver for convenient system integration
and operates from +5V and -12V to -18V DC power supplies. All switches incorporate
DC blocks at the RF ports. Standard screened switches incorporate epoxy sealed lids
and undergo a stringent yet cost effective screening cycle.
The switches are also available with hermetic seal and high-rel screening for military
and aerospace applications.
SPECIFICATIONS:
Parameter
Absorptive
Reflective
Unit of Measure
1–8
1–8
GHz
Insertion Loss (max)
2.2
2.1
dB
VSWR (max) (50 ohms)
1.8
1.8
ratio
Isolation (min)
80
75
dB
Switching Speed (max)
100
100
nsec
CW RF Power, Survival
30
30
dBm
P1dB*
27
27
dBm
Frequency Range
*Standard bias configuration
OUTLINE DRAWING:
FEATURES:
0.38
REF.
1.50
2X
Ø0.100 THRU
MOUNTING HOLE
0.75
0.31
TYP
0.25
MODEL NUMBER
J3
J2
J4
1.360
DC:
WWYY
SN:
0000
J5
1.50
45°
G
J1
A
7X
Ø0.020 X 0.15 LG
SOLDER PIN
0.33
0.75
B
-V
E
E 4
E 3
E1 2
+V
A
B
0.07
5X
SMA FEMALE
•
TTL-compatible drivers for convenient system
integration
•
Operates on +5V or +15V and -5V or -15V DC power
supplies (see ordering information)
•
DC blocks at all RF ports
•
Ruggedized construction
•
Hermetic versions available
•
All parts receive internal visual (per MIL-STD-883) and
temp cycle (-65 °C to +100 °C, 10 cycles)
•
Hi-Rel screening available upon request
•
30-day lead time on some configurations (contact
factory for details)
0.28
0.560
VIEW A-A
VIEW B-B
0.15
TYP.
0.45
CL
0.15
(2) PLCS.
0.08
(3) PLCS.
CL
OUTLINE CASE STYLE S4
Revised Date: 12/07/2015
(732) 460-0212
www.cobham.com/CSCS
1
S4L3/S4L3R PIN Diode Switch
Single Pole, Four Throw, Absorptive/Reflective
NOTES:
ENVIRONMENTAL SPECIFICATIONS*:
DC Bias: (Standard) +5 V +/- 0.5 V @ 160 mA max
-15 V +/- 3 V @ 50 mA max
MIL-E-5400, MIL-STD-202, MIL-E-16400
DC Bias: (-5 option) +5 V +/- 0.5 V @ 200 mA max
-5 V +/- 0.5 V @ 60 mA max
Operating Temp:
-55 °C to +85 °C
DC Bias: (-12 option) -5 V +/- 0.5 V@ 160 mA max
-15 V +/- 3 V @ 50 mA max
Storage Temp:
Humidity: -65 °C to +125 °C
MIL-STD-202F, M103, Cond B
Shock: MIL-STD-202F, M213, Cond B
Altitude: MIL-STD-202F, M105, Cond B
Vibration: MIL-STD-202F, M204, Cond B
Thermal Shock: MIL-STD-202F, M107, Cond A
Control: TTL 0 = Low Loss E1
TTL 1 = Isolation E2
E3
E4
Two Bit Control:
(-2 option)
E2
0
0
1
1
E1
0
1
0
1
controls
controls
controls
controls
J2
J3
J4
J5
–
–
–
–
J1
J1
J1
J1
* Compliant by design, verification optional
Low Loss Path
J2 – J1
J3 – J1
J4 – J1
J5 – J1
Absorptive Switch: 50 ohm termination present at J2, J3, J4
and J5 (in isolation mode).
Switching speed is defined as 50% TTL to 90% RF (t-on)
and 50% TTL to 10% RF (t-off).
Finish: Gold Plate per MIL-G-45204
Chem film per MIL-C-5541
Weight: 60g (max)
PART NUMBER ORDERING INFORMATION: :
Add “-RC” suffix: RoHS-compliant
Add “-H” suffix: Hermetic seal
Add “-5” suffix: +/- 5 V DC supplies
Add “-5-RC” suffix: +/- 5 V DC supplies, RoHS-compliant
Add “-5-H” suffix: +/- 5 V DC supplies, Hermetic seal
Add “-12” suffix: +/- 15 V DC supplies
Add “-12-RC” suffix: +/- 15 V DC supplies, RoHS-compliant
Add “-12-H” suffix: +/- 15 V DC supplies, Hermetic seal
Add “-2 suffix: Two bit logic control
Add “-2-RC” suffix: Two bit logic control, RoHS-compliant
Add “-2-H” suffix: Two bit logic control, Hermetic seal
Add “-2-5” suffix: Two bit logic control, +/- 5 V DC supplies
Add “-2-5-RC” suffix: Two bit logic control, +/- 5 V DC
supplies, RoHS-compliant
Add “-2-5-H” suffix: Two bit logic control, +/- 5 V DC supplies,
Hermetic seal
Add “-2-12” suffix: Two bit logic control, +/- 15 V DC supplies
Add “-2-12-RC” suffix: Two bit logic control, +/- 15 V DC
supplies, RoHS-compliant
Add “-2-12-H” suffix: Two bit logic control, +/- 15 V DC
supplies, Hermetic seal
ISO 9001:2008 and AS9100 certified
For further information please contact:
Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make
changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales
representative to verify that the information in this data sheet is current before using this product. CSCS
does not assume any responsibility or liability arising out of the application or use of any product or service
described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a
product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any
other of the intellectual rights of CSCS or of third parties.
Cobham Signal & Control Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212
Fax: (732) 460-0214
[email protected]
Copyright 2015, Cobham Signal & Control Solutions. All rights reserved.
Revised Date: 12/07/2015
(732) 460-0212
www.cobham.com/CSCS
2