Datenblatt

For more information, please visit the product page.
date
12/02/2014
page
1 of 8
SERIES: PCM-400 │ DESCRIPTION: AC-DC POWER SUPPLY
FEATURES
•
•
•
•
•
•
up to 400 W continuous power
universal input (90~264 Vac)
active power factor correction
peak power of 700W for 500µs duration (single output models only)
built-in remote ON/OFF, power good, & fan fail alarm options
over voltage, short circuit, over current, and
over temperature protection
• efficiency up to 87%
MODEL
preset
output
voltage
customizable
output
range7
output
current
output
power
ripple
and noise8,9
efficiency
(Vdc)
(Vdc)
max
(forced air)
(A)
max
(convection)
(A)
max
(W)
max
(mVp-p)
typ
(%)
PCM-400-121,2
12
10~13.8
33.33
18.33
400
120
85
PCM-400-151,2
15
14~15.5
26.67
14.67
400
150
85
1,2
PCM-400-18
18
16~20
22.22
12.22
400
180
85
PCM-400-241,2
24
21~26
16.67
9.17
400
240
87
1,2
PCM-400-28
28
27~34
14.29
7.86
400
280
85
PCM-400-361,2
36
35~42
11.11
6.11
400
360
87
1,2
PCM-400-48
48
43~50
8.33
4.58
400
480
87
PCM-400-541,2
54
51~60
7.41
4.07
400
540
87
PCM-400-D05123,4
Vo1
Vo2
5
12
N/A
30
20.83
15
13.33
320
50
120
87
PCM-400-D05243,4
Vo1
Vo2
5
24
N/A
30
10.42
15
6.67
320
50
240
87
PCM-400-D05483,4
Vo1
Vo2
5
48
N/A
30
5.21
15
3.33
320
50
480
87
PCM-400-D12245,6
Vo1
Vo2
12
24
N/A
20.83
10.42
12.5
8.33
400
120
240
87
Notes:
1.
2.
3.
4.
5.
6.
7.
8.
9.
For U-frame models, the maximum output power is 400W with a minimum of 27 CFM forced air, 220 W maximum with convection cooling.
For CNF models, the maximum output is 220 W with convection cooling.
For U-frame models, the total combined output power is 320W with a minimum of 27 CFM forced air, 180 W maximum with convection cooling.
For CNF models, the maximum output is 180 W with convection cooling.
For U-frame models, the total combined output power is 400W with a minimum of 27 CFM forced air, 200 W maximum with convection cooling.
For CNF models, the maximum output is 200 W with convection cooling.
Output can be custom set within range.
Measured at 10 kHz ~ 20 MHz bandwidth, with a 22 µF electrolytic and 0.1 µF ceramic capacitor on the output.
1% minimum load is required to maintain ripple and regulation (10% for dual output models).
PART NUMBER KEY
PCM-400 - X XX - XXX - X
Base Number
Output
“blank” = Single
D = Dual
Output Voltage
cui.com
Chassis
Input/Output Connectors
U = U-frame
“blank” = terminal block
CNF = enclosed
1 = header
CF = enclosed with top fan
CFS = enclosed with rear fan
For more information, please visit the product page.
CUI Inc │ SERIES: PCM-400 │ DESCRIPTION: AC-DC POWER SUPPLY
date 12/02/2014
page 2 of 8
INPUT
parameter
conditions/description
min
voltage
typ
90
frequency
47
current
at 90 Vac, full load
inrush current
at 115 Vac, cold start
at 230 Vac, cold start
leakage current
at 120 Vac
at 240 Vac
power factor correction
at 230 Vac, full load
remote ON/OFF
designated as INH on Pin 4 of CN1, requires a low
signal to inhibit output
input fuse
T8 A/250 V on the input
max
units
264
Vac
63
Hz
8
A
35
70
A
A
300
500
μA
μA
max
units
0.9
OUTPUT
parameter
conditions/description
total regulation
single output models
dual output models
transient response
returns to within 1% in <2.5 ms for a 50% load
change and the peak transient does not exceed 5%
start-up time
at 120 Vac
hold-up time
at 120 Vac, 75% load
adjustability1
built in trim pot
±5
%
PFC
68
kHz
55
50
kHz
kHz
switching frequency
PWM
min
typ
±1
±5
1.5
16
all single output models & PCM-400-D1224
all other dual output models
s
ms
fan drive
12 Vdc/300 mA for external fan
fan fail (FF)
Designated as FF on Pin 3 of CN1, open collector output rated for
15Vdc/5mA max sink current. It goes high when a fan failure is detected.
power good (PG)
Designated as PG on CN1, TTL high 100~500 ms after DC regulation.
It goes low at least 1 ms before loss of regulation.
power supply on
green LED designated as LED1 on the PCB
Note:
%
%
1. U-Frame versions only
PROTECTIONS
parameter
conditions/description
short circuit protection
auto restart
min
over current protection
auto restart
over voltage protection
output latches, must recycle ac input to reset
over temperature protection
auto restart
typ
110
max
units
140
%
130
%
105
110
115
°C
min
typ
max
units
SAFETY & COMPLIANCE
parameter
conditions/description
isolation voltage
input to output, for 3 sec.
input to core, for 3 sec.
input to chassis (10 mA AC cut-off current), for 3 sec.
safety approvals
UL/cUL, TUV
safety standards
UL 60950-1, EN 60950-1
EMI/EMC2
EN 55022 Class B (conducted/radiated), EN 61000-3-(2,3),
EN 55024, IEC 61000-4-(2, 3, 4, 5, 6, 11), CE
MTBF
as per MIL-HDBK-217F at 30°C
RoHS
2011/65/EU
Note:
3,000
1,500
1,500
100,000
Vac
Vac
Vac
hrs
2. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
cui.com
For more information, please visit the product page.
CUI Inc │ SERIES: PCM-400 │ DESCRIPTION: AC-DC POWER SUPPLY
date 12/02/2014
page 3 of 8
ENVIRONMENTAL
parameter
conditions/description
operating temperature
see derating curve
min
storage temperature
max
units
0
typ
70
°C
-20
85
°C
operating humidity
non-condensing
5
90
%
storage humidity
non-condensing
5
95
%
vibration
at 5~50 Hz, along the X, Y, and Z axis
±0.75
G
DERATING CURVE
100
Load (%)
80
60
50
Safe operating area
40
20
0
0
10
20
30
40
50
60
70
Ambient Temperature (°C)
MECHANICAL
parameter
conditions/description
min
dimensions
U-frame models: 152.40 x 101.60 x 38.10
CNF models: 152.40 x 101.60 x 39.90
CF models: 152.40 x 101.60 x 54.45
CFS models: 177.80 x 101.60 x 40.64
weight
U-frame models
CNF models
CF models
CFS models
typ
units
mm
mm
mm
mm
600
650
800
750
cui.com
max
g
g
g
g
For more information, please visit the product page.
CUI Inc │ SERIES: PCM-400 │ DESCRIPTION: AC-DC POWER SUPPLY
date 12/02/2014
MECHANICAL DRAWING - SINGLE OUTPUT MODELS
U-FRAME
units: mm[inch]
CN1
PIN
Function
1
PG
2
RTN
3
FF
4
INH
CN2
Terminal Block
Header
PIN
Function
PIN
Function
1~2
+Vo
1~5
+Vo
3~4
-Vo
6~10
-Vo
5
GND
12
GND
6
N
14
N
7
L
16
L
Fan1
PIN
Function
1
+FAN
2
-FAN
CNF
units: mm[inch]
CN1
PIN
Function
1
PG
2
RTN
3
FF
4
INH
CN2
Terminal Block
Header
PIN
Function
PIN
Function
1~2
+Vo
1~5
+Vo
3~4
-Vo
6~10
-Vo
5
GND
12
GND
6
N
14
N
7
L
16
L
Fan1
PIN
Function
1
+FAN
2
-FAN
Notes:
1.
2.
3.
4.
CN1 mates with JST XHP-4 or equivalent (CHYAO SHIUNN JS-2001-04) and JST SXH-002T-P0.6 mating pins (30~26 AWG).
CN2: Terminal Block option is Howder Part No. HD-121-7P. Header option mates with JST VHR-5 (input) and VHR-10 (output).
Fan drive connector (Fan1) mates with JST Part No. XHP-2 or equivalent (CHYAO SHIUNN JS-2001-02).
Mounting hole max screw depth is 2.0mm (M4x0.7 Inserts).
cui.com
page 4 of 8
For more information, please visit the product page.
CUI Inc │ SERIES: PCM-400 │ DESCRIPTION: AC-DC POWER SUPPLY
date 12/02/2014
MECHANICAL DRAWING - SINGLE OUTPUT MODELS (CONTINUED)
CF
units: mm[inch]
CN1
PIN
Function
1
PG
2
RTN
3
FF
4
INH
CN2
Terminal Block
Header
PIN
Function
PIN
Function
1~2
+Vo
1~5
+Vo
3~4
-Vo
6~10
-Vo
5
GND
12
GND
6
N
14
N
7
L
16
L
Fan1
PIN
Function
1
+FAN
2
-FAN
CFS
units: mm[inch]
CN1
PIN
Function
1
PG
2
RTN
3
FF
4
INH
CN2
Terminal Block
Header
PIN
Function
PIN
Function
1~2
+Vo
1~5
+Vo
3~4
-Vo
6~10
-Vo
5
GND
12
GND
6
N
14
N
7
L
16
L
Fan1
PIN
Function
1
+FAN
2
-FAN
Notes:
1.
2.
3.
4.
CN1 mates with JST XHP-4 or equivalent (CHYAO SHIUNN JS-2001-04) and JST SXH-002T-P0.6 mating pins (30~26 AWG).
CN2: Terminal Block option is Howder Part No. HD-121-7P. Header option mates with JST VHR-5 (input) and VHR-10 (output).
Fan drive connector (Fan1) mates with JST Part No. XHP-2 or equivalent (CHYAO SHIUNN JS-2001-02).
Mounting hole max screw depth is 2.0mm (M4x0.7 Inserts).
cui.com
page 5 of 8
For more information, please visit the product page.
CUI Inc │ SERIES: PCM-400 │ DESCRIPTION: AC-DC POWER SUPPLY
date 12/02/2014
MECHANICAL DRAWING - DUAL OUTPUT MODELS
U-FRAME
units: mm[inch]
CN1
PIN
Function
1
PG
2
RTN
3
FF
4
INH
CN2
Terminal Block
Header
PIN
Function
PIN
Function
1
+Vo1
1~3
+Vo1
2~3
RTN
4~8
RTN
4
+Vo2
9~10
+Vo2
5
GND
12
GND
6
N
14
N
7
L
16
L
Fan1
PIN
Function
1
+FAN
2
-FAN
CNF
units: mm[inch]
CN1
PIN
Function
1
PG
2
RTN
3
FF
4
INH
CN2
Terminal Block
Header
PIN
Function
PIN
Function
+Vo1
1
+Vo1
1~3
2~3
RTN
4~8
RTN
4
+Vo2
9~10
+Vo2
5
GND
12
GND
6
N
14
N
7
L
16
L
Fan1
PIN
Function
1
+FAN
2
-FAN
Notes:
1.
2.
3.
4.
CN1 mates with JST XHP-4 or equivalent (CHYAO SHIUNN JS-2001-04) and JST SXH-002T-P0.6 mating pins (30~26 AWG).
CN2: Terminal Block option is Howder Part No. HD-121-7P. Header option mates with JST VHR-5 (input) and VHR-10 (output).
Fan drive connector (Fan1) mates with JST Part No. XHP-2 or equivalent (CHYAO SHIUNN JS-2001-02).
Mounting hole max screw depth is 2.0mm (M4x0.7 Inserts).
cui.com
page 6 of 8
For more information, please visit the product page.
CUI Inc │ SERIES: PCM-400 │ DESCRIPTION: AC-DC POWER SUPPLY
date 12/02/2014
MECHANICAL DRAWING - DUAL OUTPUT MODELS (CONTINUED)
CF
units: mm[inch]
CN1
PIN
Function
1
PG
2
RTN
3
FF
4
INH
CN2
Terminal Block
Header
PIN
Function
PIN
Function
1
+Vo1
1~3
+Vo1
2~3
RTN
4~8
RTN
4
+Vo2
9~10
+Vo2
5
GND
12
GND
6
N
14
N
7
L
16
L
Fan1
PIN
Function
1
+FAN
2
-FAN
CFS
units: mm[inch]
CN1
PIN
Function
1
PG
2
RTN
3
FF
4
INH
CN2
Terminal Block
Header
PIN
Function
PIN
Function
+Vo1
1
+Vo1
1~3
2~3
RTN
4~8
RTN
4
+Vo2
9~10
+Vo2
5
GND
12
GND
6
N
14
N
7
L
16
L
Fan1
PIN
Function
1
+FAN
2
-FAN
Notes:
1.
2.
3.
4.
CN1 mates with JST XHP-4 or equivalent (CHYAO SHIUNN JS-2001-04) and JST SXH-002T-P0.6 mating pins (30~26 AWG).
CN2: Terminal Block option is Howder Part No. HD-121-7P. Header option mates with JST VHR-5 (input) and VHR-10 (output).
Fan drive connector (Fan1) mates with JST Part No. XHP-2 or equivalent (CHYAO SHIUNN JS-2001-02).
Mounting hole max screw depth is 2.0mm (M4x0.7 Inserts).
cui.com
page 7 of 8
For more information, please visit the product page.
CUI Inc │ SERIES: PCM-400 │ DESCRIPTION: AC-DC POWER SUPPLY
date 12/02/2014
page 8 of 8
REVISION HISTORY
rev.
description
date
1.0
initial release
07/16/2014
1.01
updated datasheet
12/02/2014
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
[email protected]
CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a
life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Similar pages