1N4007 AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER 1.0 Amp 1000V Features • Low coat construction • Low forward voltage drop • Low reverse leakage • High forward surge current capability • High temperature soldering guaranteed: 260°C/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension • RoHS compliant package Mechanical Data • Case: Transfer molded plastic • Epoxy: UL94V-O rate flame retardant • Polarity: Color band denotes cathode end • Lead: Plated axial lead, solderable per MIL-STD-202E method 208C • Mounting position: Any • Weight: 0.012 ounce, 0.33 grams Packing & Order Information 5,000/T Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings Ratings at 25°C ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% Parameter Symbol 1N4007 Unit Maximum repetitive peak reverse voltage VRRM 1000 V RMS Voltage (Max.) VRMS 700 V Working peak reverse voltage VRWM 1000 V Maximum average forward rectified current IF(AV) 1 A TJ -55 to +150 °C Operating junction temperature range Publication Order Number: [1N4007] © Bruckewell Technology Corporation Rev. A -2014 1N4007 AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER 1.0 Amp 1000V Maximum Ratings Ratings at 25°C ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% Parameter Symbol 1N4007 Unit Peak forward surge current 8.3ms single half sine-wave superimposed IFSM 30 A TSTG -55 to +150 °C on rated load (JEDEC Method) Storage temperature range Electrical characteristics (Tc=25°C unless otherwise noted) Parameter Symbol Instantaneous forward voltage at IF=1A, Tj=25°C Maximum reverse current per leg VF Tj=25°C Value Typical Max 0.98 1.1 Unit V 5 u’A 50 u’A Value Unit IR at working peak reverse voltage Tj=100°C Thermal characteristics (Tc=25°C unless otherwise noted) Parameter Typical thermal resistance Symbol 1N4007 RθJA 50 °C/W Notes: (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms Publication Order Number: [1N4007] © Bruckewell Technology Corporation Rev. A -2014 1N4007 AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER 1.0 Amp 1000V ■Ratings and Characteristic Curves FIG.1- TYPICAL FORWARD CURRENT DERATING CURVE FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.3- TYPICAL INSTANTANEOUS FORWARD FIG.4- TYPICAL REVERSE CHARACTERISTICS CHARACTERISTICS FIG.5- TYPICAL JUNCTION CHARACTERISTICS Publication Order Number: [1N4007] © Bruckewell Technology Corporation Rev. A -2014 1N4007 AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER 1.0 Amp 1000V Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [1N4007] © Bruckewell Technology Corporation Rev. A -2014