A42

A42
NPN Plastic-Encapsulate Transistors
Features
• Low Collector-Emitter Saturation Voltage
• High Breakdown Voltage
• RoHS compliant package
Packing & Order Information
3,000/Reel
Graphic symbol
Publication Order Number: [A42]
© Bruckewell Technology Corporation Rev. A -2014
A42
NPN Plastic-Encapsulate Transistors
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Absolute maximum ratings (Ta=25°C)
Symbol
Parameter
Value
Unit
VCBO
Collector-Base Voltage
310
V
VCEO
Collector-Emitter Voltage
305
V
VEBO
Emitter-Base Voltage
5
V
IC
Collector Current -Continuous
200
mA
ICM
Collector Current - Pulsed
500
mA
PC
Collector Power Dissipation
500
mW
RθJA
Thermal Resistance from Junction to Ambient
250
°C/W
Tj
Junction Temperature
150
°C
Tstg
Storage Temperature
-55 to +150
°C
ELECTRICAL CHARACTERISTICS @ Ta=25°C unless otherwise specified
Symbol
Parameter
Test Conditions
MIN
TYP
MAX
UNIT
BVCBO
Collector-base breakdown voltage
IC = 100μA , IE = 0
310
V
BVCEO
Collector-emitter breakdown voltage
IC = 1 mA , IB = 0
305
V
BVEBO
Emitter-base breakdown voltage
IE = 100μA , IC = 0
5
V
ICBO
Collector cut-off current
VCB = 200 V , IE = 0
0.25
μA
ICEO
Collector cut-off current
VCB = 300 V , IB = 0
0.25
μA
VCB = 300 V , IB = 0
5
μA
0.1
μA
IEBO
Emitter cut-off current
hFE(1)
hFE(2)
DC current gain
hFE(3)
VEB = 5 V , IC = 0
VCE = 10 V , IC = 1 mA
60
VCE = 10 V , IC = 10 mA
100
VCE = 10 V , IC = 30 mA
75
300
VCE(sat)
Collector-emitter saturation voltage
IC = 20 mA , IB = 2 mA
0.2
V
VBE(sat)
Base-emitter saturation voltage
IC = 20 mA , IB = 2 mA
0.9
V
fT
Transition frequency
Publication Order Number: [A42]
VCE = 20 V , IE = 10 mA
f = 30MHz
50
MHz
© Bruckewell Technology Corporation Rev. A -2014
A42
NPN Plastic-Encapsulate Transistors
■Typical Characteristics
Publication Order Number: [A42]
© Bruckewell Technology Corporation Rev. A -2014
A42
NPN Plastic-Encapsulate Transistors
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: [A42]
© Bruckewell Technology Corporation Rev. A -2014
Similar pages