Datenblatt

For more information, please visit the product page.
date
07/22/2014
page
1 of 5
SERIES: VOF-85 │ DESCRIPTION: AC-DC POWER SUPPLY
FEATURES
•
•
•
•
•
•
•
•
•
•
up to 85 W continuous power
compact size
universal input (90~277 Vac)
single output from 5~48 Vdc
user trimmable output voltage option
no load power consumption <0.25W
3000 Vac isolation
over current, over voltage, and short circuit protections
UL/cUL and TUV 60950-1 safety approvals
efficiency up to 89%
MODEL
output
voltage
output
current
output
power1
ripple
and noise2
efficiency
(Vdc)
max
(A)
max
(W)
max
(mVp-p)
typ
(%)
5
10.6
53
120
78
VOF-85-12
12
7.1
85
120
86
VOF-85-15
15
5.7
85
150
88
VOF-85-24
24
3.6
85
240
87
VOF-85-48
48
1.8
85
480
89
VOF-85-5
Notes:
1. 5 Vdc output model requires forced air with 6.7 CFM external fan to achieve 53W. All other models can achieve 85W with convection cooling.
2. Ripple & noise are measured at 20 MHz BW with 0.1 μF ceramic cap and a 10 μF electrolytic capacitors on the output and the two earth ground pads are connected to input earth ground.
PART NUMBER KEY
VOF-85 - XX
Base Number
Output Voltage
cui.com
For more information, please visit the product page.
CUI Inc │ SERIES: VOF-85 │ DESCRIPTION: AC-DC POWER SUPPLY
date 07/22/2014 │ page 2 of 5
INPUT
parameter
conditions/description
min
voltage
typ
90
frequency
47
max
units
277
Vac
63
Hz
input current
at 115 Vac, full load
at 230 Vac, full load
1.8
0.8
A
A
inrush current
at 230 Vac, cold start
50
A
leakage current
at 277 Vac
3.5
mA
no load power consumption
at 110 Vac
at 230 Vac
0.25
0.35
W
W
input fuse
5 A/250V time delay fuse (included)
max
units
OUTPUT
parameter
conditions/description
line regulation
low line to high line
load regulation
full load to 10% load
min
initial set point accuracy
typ
±0.5
%
±1
%
±3
%
500
1200
1500
2400
4800
mVp-p
mVp-p
mVp-p
mVp-p
mVp-p
transient response
1 kHz, 10~100% load
VOF-85-5
VOF-85-12
VOF-85-15
VOF-85-24
VOF-85-48
hold-up time
at 115 Vac, full load
start-up time
at 115 Vac, full load
50
ms
start-up delay
at 115 Vac, full load
1000
ms
adjustability
built in trim pot
8
±5
switching frequency
61
temperature coefficient
fan drive1
Notes:
ms
65
%
69
±0.03
kHz
%/°C
12 Vdc/100 mA for external fan
1. Fan drive for VOF-85-5 model only.
PROTECTIONS
parameter
conditions/description
min
short circuit protection
hiccup, auto recovery
110
typ
max
units
%
over current protection
hiccup, auto recovery
110
%
over voltage protection
clamped by TVS
SAFETY & COMPLIANCE
parameter
conditions/description
isolation voltage
input to output
input to ground
output to ground
safety approvals
UL60950-1, EN60950-1
EMI/EMC2
EN 55022: 2010 Class B, EN 61204-3:2000, EN
61000-6-3: 2007 +A1: 2011, EN 61000-3-2:
2006 +A2: 2009, EN 61000-3-3: 2008, EN 55024:
2010, EN 61000-6-1: 2007, ENV 50204: 1995, CE,
FCC
class
class II
MTBF
as per MIL-HDBK-217F at 25 °C, full load
RoHS
2011/65/EU
Notes:
min
typ
max
units
3,000
1,500
1,500
Vac
Vac
Vac
250,000
hours
2. The power supply is considered a component which will be installed into final equipment. The final equipment still must be tested to meet the necessary EMC directives.
cui.com
For more information, please visit the product page.
CUI Inc │ SERIES: VOF-85 │ DESCRIPTION: AC-DC POWER SUPPLY
date 07/22/2014 │ page 3 of 5
ENVIRONMENTAL
parameter
conditions/description
min
max
units
operating temperature
see derating curves
-20
60
°C
storage temperature
typ
-40
85
°C
operating humidity
non-condensing
20
90
%
storage humidity
non-condensing
20
90
%
operating altitude
10~3000Hz, 10 minutes per cycle, for 1 hour
along each of the X, Y, and Z axes
vibration & shock
2000
m
2
G
DERATING CURVES
Load vs Input Voltage
at 110 Vac
100
100
90
80
80
60
Load (%)
Load (%)
Temperature Derating Curve
Safe operating area
50
40
20
-20
Ta=25°C
60
40
20
0
10
20
30
40
50
60
70
Ambient Temperature (°C)
90
95
100
105
110
115
Input Voltage (Vac)
cui.com
120
125
277
For more information, please visit the product page.
CUI Inc │ SERIES: VOF-85 │ DESCRIPTION: AC-DC POWER SUPPLY
date 07/22/2014 │ page 4 of 5
MECHANICAL
parameter
conditions/description
dimensions
101.6 x 50.8 x 33.6 (4.00 x 2.00 x 1.32 inch)
min
weight
MECHANICAL DRAWING
units: mm[inch]
tolerance: ±0.30
CN1
PIN
Function
1
L
2
NP
3
N
CN2
PIN
Function
1
+Vo
2
+Vo
3
-Vo
4
-Vo
Fan1
PIN
Function
1
+FAN
2
-FAN
1.
2.
3.
4.
5.
Fan connector only populated on model VOF-85-5.
CN1 mates with Molex housing 09-50-3031 with Molex 2478 series crimp contact or equivalent.
CN2 mates with Molex housing 09-50-3041 with Molex 2478 series crimp contact or equivalent.
Fan connector mates with JST housing XHP-2 with JST SXH-001T-P0.6 crimp contact or equivalent.
All specifications are measured at Ta=25°C, 230 Vac input voltage, and rated output load unless otherwise specified.
cui.com
max
units
mm
170
VOF-85-5: 6.7 CFM external fan at 25mm (not included)
all other models: open frame (convection)
cooling method
Notes:
typ
g
For more information, please visit the product page.
CUI Inc │ SERIES: VOF-85 │ DESCRIPTION: AC-DC POWER SUPPLY
date 07/22/2014 │ page 5 of 5
REVISION HISTORY
rev.
description
date
1.0
initial release
04/08/2014
1.01
updated datasheet
05/09/2014
1.02
updated derating curve, updated datasheet
06/10/2014
updated datasheet
07/22/2014
1.03
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
[email protected]
CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a
life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.