Datenblatt

For more information, please visit the product page.
date
09/22/2014
page
1 of 6
SERIES: PLDA40 │ DESCRIPTION: LED DRIVER
FEATURES
•
•
•
•
•
•
•
•
up to 40 W continuous power
universal input range (90~305 Vac)
single output
dimming options: PWM, 1~10 Vdc,
resistive, DALI
power factor correction ≥ 0.9
constant current
low profile for easy installation
IP67 rated
MODEL
• over voltage, continuous short circuit,
and over temperature protection
• UL 8750, IEC/EN61347-2-13 approval
• EN61000-3-2 Class C
(harmonic current) approval
• efficiency up to 88%
• suitable for LED lighting and signage
applications
output voltage
range1
output
current
output
power
ripple
and noise2
efficiency
min
(Vdc)
max
(Vdc)
(mA)
max
(W)
max
(mVp-p)
typ
(%)
PLDA40-840-277
9
48
840
40.32
480
88
PLDA40-1110-277
9
36
1110
40
360
86
PLDA40-1700-277
9
24
1700
40.8
240
86
Notes:
1. constant current region
2. ripple and noise are measured at 20MHz bandwidth with a 0.1uF ceramic capacitor and 10uF aluminum capacitor.
PART NUMBER KEY
PLDA40 - XXXX - 277XXX
Base Number
IP Rating
“blank” = IP64
A = IP67
Output Current
Dimming
PE = PWM, 1~10 Vdc, resistive
D = DALI
“blank” = no dimming
Input Voltage
277 = (90~305 Vac)
cui.com
For more information, please visit the product page.
CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER
date 09/22/2014
page 2 of 6
INPUT
parameter
conditions/description
min
voltage
frequency
current
at 115 Vac, full load
at 230 Vac, full load
inrush current
at 240 Vac, cold start, 25°C, after 100 μs
leakage current
at 277 Vac
power factor correction
at 115 Vac/230 Vac, 75~100% load
max
units
90
127
typ
305
420
Vac
Vdc
50
60
Hz
0.45
0.22
A
A
5
A
0.75
mA
1
W
max
units
0.9
no load power consumption
OUTPUT
parameter
conditions/description
min
current line regulation
measured from high line to low line at full load
±5
%
current load regulation
measured from min. to max. of constant current
region
±5
%
constant current accuracy
at nominal input and full load
±5
%
switching frequency
start-up time
typ
60
at 90 Vac
kHz
0.5
temperature coefficient
±0.05
s
%/°C
PROTECTIONS
parameter
conditions/description
over voltage protection
TVS clamp
short circuit protection
hiccup mode, auto recovery
min
over temperature protection
typ
max
105
units
°C
SAFETY & COMPLIANCE
parameter
conditions/description
min
isolation voltage
input to output, for 1 minute
isolation resistance
input to output
safety approvals
UL8750, IEC/EN61347-1, IEC/EN61347-2-13, PSE
DALI
IEC62386-102, IEC62386-207
EMI/EMC
FCC Part 15 Class B/EN55015, EN61547,
EN61000-4-(2,3,4,5), EN61000-3-2
Harmonic Class C, EN61000-3-3
MTBF
as per MIL-HDBK-217F, at 25°C
RoHS
2011/65/EU
typ
max
units
3,750
Vac
100
MΩ
200,000
hours
ENVIRONMENTAL
parameter
conditions/description
min
operating temperature
see derating curves
-40
storage temperature
-40
operating altitude
cui.com
typ
max
units
70
°C
85
°C
3,000
m
For more information, please visit the product page.
CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER
date 09/22/2014
page 3 of 6
MECHANICAL
parameter
conditions/description
dimensions
6.614 x 1.575 x 0.992 (168 x 40 x 25.2 mm)
min
typ
max
units
inches
weight
350
g
MECHANICAL DRAWING
MODELS WITHOUT DIMMING
units: inches[mm]
tolerance: ±0.02[±0.5]
unless otherwise specified
INPUT WIRE CONNECTIONS
7.008[178.00]
Function
Black
ACL
White
ACN
OUTPUT WIRE CONNECTIONS
Function
Red
+Vo
Black
-Vo
0.393[10.00]
0.393[10.00]
INPUT
ACL Black
ACN White
0.393[10.00]
OUTPUT
Red
UL 1015 16AWG
Black
+V0
-V0
0.393[10.00]
UL 1015 18AWG
7.677[195.00]±0.787[20.00]
7.874[200.00]±0.787[20.00]
8.071[205.00]±0.787[20.00]
0.992[25.20]
Color
0.138[3.50]
Color
1.575[40.00]
MODELS WITH DIMMING
units: inches[mm]
tolerance: ±0.02[±0.5]
unless otherwise specified
INPUT WIRE CONNECTIONS
ACL
White
ACN
0.472[12.00]
Function
0.787[20.00]
Black ACL
Color
Function
Red
+Vo
Black
-Vo
Blue1
D+/DA+
White1
D-/DA-
White ACN
0.787[20.00]
INPUT
0.394[10.00]
OUTPUT
UL 2464 16AWG+22AWG
UL 2464 18AWG
11.811[300.00]±0.787[20.00]
11.811[300.00]±0.787[20.00]
0.992[25.20]
OUTPUT WIRE CONNECTIONS
6.614[168.00]
0.138[3.50]
Color
Black
7.402[188.00]
Note: 1. DALI models are marked with “DA”
0.433[11.00]
1.575[40.00]
cui.com
22AWG Blue D+
22AWG White D- (Optional)
16AWG Red +Vo
16AWG Black -Vo
0.394[10.00]
For more information, please visit the product page.
CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER
date 09/22/2014
page 4 of 6
DERATING CURVES
Temperature Derating Curve
PF vs. Output Current
1.00
100
0.95
80
0.90
THD vs. Output Current
25%
60
9$&
THD
Safe operating area
0.85
PF
Load (%)
20%
50
40
0.80
20
0.75
-40
-20
0
20
40 50 60 70 80
100
0.70
50%
9$&
15%
9$&
10%
9$&
60%
70%
Ambient Temperature (°C)
80%
90%
100%
Output Current
5%
50%
60%
70%
80%
90%
100%
Output Current
EFFICIENCY CURVES
Efficiency vs. Output Current
(PLDA40-840-277PE, with dimming)
Efficiency
Efficiency
9
9
9
9
9
Output Current
9
9
Efficiency vs. Output Current
(PLDA40-1700-277PE, with dimming)
Efficiency
9
Efficiency vs. Output Current
(PLDA40-1110-277PE, with dimming)
9
9
9
9
Output Current
9
cui.com
9
Output Current
9
For more information, please visit the product page.
CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER
date 09/22/2014
page 5 of 6
APPLICATION NOTES
1. Dimming
Dimming should be controlled from the dimming controller with DALI, PWM, 1~10 Vdc, or resistive. Set the DALI controller to
“broadcast mode” when connecting to the LED driver, since it will not be addressed in production.
+Vo
(RED)
ACL (BLACK)
AC
LED DRIVER
-Vo
(BLACK)
D+/DA
(BLUE)
ACN (WHITE)
D-/DA
(WHITE)
Dimming Controller
1~10 Vdc Dimming
Voltage
1V
2V
3V
4V
5V
6V
7V
8V
9V
10V (Open)
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Potentiometer
1K
2K
3K
4K
5K
6K
7K
8K
9K
10K (Open)
Output Current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Duty Cycle
10%
20%
30%
40%
50%
60%
70%
80%
90%
100% (Open)
Output Current
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output Current
Potentiometer Dimming
PWM Dimming (@ 1kHz, 10V)
Note:
1. All specifications are measured at Ta=25°C, 115/230 Vac input voltage, and full load unless otherwise specified.
cui.com
For more information, please visit the product page.
CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER
date 09/22/2014
page 6 of 6
REVISION HISTORY
rev.
1.0
description
date
initial release
09/22/2014
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
[email protected]
CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a
life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Similar pages