Datenblatt

For more information, please visit the product page.
date
09/16/2014
page
1 of 4
SERIES: PLDA50 │ DESCRIPTION: LED DRIVER
FEATURES
•
•
•
•
•
•
• over voltage, and continuous short
circuit protection
• UL 8750, IEC/EN61347-2-13 approval
• EN61000-3-2 Class C
(harmonic current) approval
• efficiency up to 86%
up to 50 W continuous power
universal input range (90~264 Vac)
dual output
power factor correction ≥ 0.9
constant current
low profile for easy installation
• suitable for LED lighting and signage
applications
MODEL
output voltage
range1
output
power
ripple
and noise2
efficiency
(mA)
max
(W)
max
(mVp-p)
typ
(%)
min
(Vdc)
max
(Vdc)
18
42
Io1
Io2
600
600
25.2
25.2
300
86
8
24
Io1
Io2
1000
1000
24
24
300
85
PLDA50-D600-240
PLDA50-D1000-240
Notes:
output
current
1. Constant current region
2. Ripple and noise measured at full load, 100 Vac input, 20 MHz bandwidth with a 0.1 uF ceramic capacitor across the output. Vo = 36 Vdc for PLDA50-D600-240 and 21
Vdc for PLDA50-D1000-240.
PART NUMBER KEY
PLDA50 - DXXXX - 240
Base Number
Input Voltage
240 = (90~264 Vac)
Output Current
cui.com
For more information, please visit the product page.
CUI Inc │ SERIES: PLDA50 │ DESCRIPTION: LED DRIVER
date 09/16/2014
page 2 of 4
INPUT
parameter
conditions/description
min
voltage
typ
90
frequency
50
current
at 100 Vac, full load
inrush current
at 230 Vac, cold start, 25°C, after 400 μs
leakage current
at 230 Vac
power factor correction
at 100 Vac/230 Vac, 85~100% load
0.9
conditions/description
min
max
units
264
Vac
60
Hz
0.65
A
5
A
3.5
mA
max
units
OUTPUT
parameter
typ
current line regulation
measured from high line to low line
±5
%
current load regulation
measured from max. to min. of constant current
region
±5
%
±5
%
constant current accuracy
start-up time
at 100 Vac
1.6
temperature coefficient
±0.03
s
%/°C
PROTECTIONS
parameter
conditions/description
over voltage protection
TVS clamp
short circuit protection
hiccup mode, auto recovery
min
typ
min
typ
max
units
max
units
3,750
1,500
Vac
Vac
SAFETY & COMPLIANCE
parameter
conditions/description
isolation voltage
input to output for 1 minute
input to ground for 1 minute
isolation resistance
input to output
100
safety approvals
UL8750, IEC/EN61347-1, IEC/EN61347-2-13, PSE
EMI/EMC
EN55022/EN55015 Class B, EN61547, EN61000-4-(2,3,4,5,6,8,11),
EN61000-3-2 Harmonic Class C, EN61000-3-3
MTBF
as per MIL-HDBK-217F, at 25°C
RoHS
2011/65/EU
MΩ
200,000
hours
ENVIRONMENTAL
parameter
conditions/description
min
max
units
operating temperature
see derating curves
-40
70
°C
-40
85
°C
10
80
%
3,000
m
storage temperature
operating humidity
non-condensing
typ
operating altitude
vibration
0~500 Hz, 60 min. along each X, Y, and Z axes
cui.com
2
G
For more information, please visit the product page.
CUI Inc │ SERIES: PLDA50 │ DESCRIPTION: LED DRIVER
date 09/16/2014
page 3 of 4
MECHANICAL
parameter
conditions/description
dimensions
300 x 36.1 x 24.5
min
typ
230
MECHANICAL DRAWING
units: mm
tolerance: x.x = ±0.5
x.xx = ±0.25
unless otherwise specified
wire range: 20~14 AWG
CN1
Function
1
ACL
2
ACN
CN2
Pin
Function
1
+V1
2
-V1
CN3
Pin
Function
1
+V2
2
-V2
DERATING CURVES
Temperature Derating Curve
Load (%)
100
80
Safe operating area
60
50
40
20
-40
-20
0
20
40 50 60 70 80
Ambient Temperature (°C)
Note:
units
mm
weight
Pin
max
1. CN1: WAGO 235-502 or equivalent
2. CN2 & CN3: WAGO 235-402 or equivalent
3. All specifications are measured at Ta=25°C, 115/230 Vac input voltage, and full load unless otherwise specified.
cui.com
100
g
For more information, please visit the product page.
CUI Inc │ SERIES: PLDA50 │ DESCRIPTION: LED DRIVER
date 09/16/2014
page 4 of 4
REVISION HISTORY
rev.
1.0
description
date
initial release
09/16/2014
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
[email protected]
CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a
life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Similar pages