P6KE6.8-600A Transient Voltage Suppressor VBR : 6.8 - 600 Volts PPK : 600 Watts Features • Glass passivated jungtion chip • 600W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) • Typical IR less then 1μA above 10V • RoHS compliant package Applications • For Bi-directional use C or CA Suffix • Electrical characteristics apply in both directions Mechanical Data • Case : DO-15 Molded plastic • Epoxy : UL94V-0 rate flame retardant • Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed • Polarity : Color band denotes cathode end Graphic symbol • Mounting position : Any • Weight : 0.4 gram Packing & Order Information 3,000/T MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Symbol Parameter PPK Peak Power Dissipation at Ta = 25ºC, Tp=1ms (Note1) PD Steady State Power Dissipation at TL = 75 °C Value Unit Minimum 600 W 5.0 W 100 A -65 to + 175 °C Peak Forward Surge Current, 8.3ms Single Half IFSM Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 100 Amps. TJ, TSTG Operating and Storage Temperature Range Publication Order Number: [P6KE6.8-600A] ©Bruckewell Technology Corporation Rev. A -2014 P6KE6.8-600A Transient Voltage Suppressor VBR : 6.8 - 600 Volts PPK : 600 Watts Notes: (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on copper Lead area at 1.57 in2 ( 40 mm2 ). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per Minutes maximum. ELECTRICAL CHARACTERISTICS (Rating at 25ºC ambient temperature unless otherwise specified) Working Maximum Maximum Maximum Maximum Breakdown Voltage Peak Reverse Clamping Reverse Temperature @ It ( Note 1 ) Reverse Leakage @ Voltage @ Current Co-efficient Type No. Voltage VRWM IRSM of VBR VBR (V) It VRWM IR IRSM VRSM Min Max (mA) (V) (μA) (A) (V) (% / °C) P6KE6.8 6.12 7.48 10 5.50 1000 38.0 10.8 0.057 P6KE6.8A 6.45 7.14 10 5.80 1000 40.0 10.5 0.057 P6KE7.5 6.75 8.25 10 6.05 500 36.0 11.7 0.061 P6KE7.5A 7.13 7.88 10 6.40 500 37.0 11.3 0.061 P6KE8.2 7.38 9.02 10 6.63 200 33.0 12.5 0.065 P6KE8.2A 7.79 8.61 10 7.02 200 35.0 12.1 0.065 P6KE9.1 8.19 10.0 1.0 7.37 50 30.0 13.8 0.068 P6KE9.1A 8.65 9.55 1.0 7.78 50 31.0 13.4 0.068 P6KE10 9.00 11.0 1.0 8.10 10 28.0 15.0 0.073 P6KE10A 9.50 10.5 1.0 8.55 10 29.0 14.5 0.073 P6KE11 9.90 12.1 1.0 8.92 5.0 26.0 16.2 0.075 P6KE11A 10.5 11.6 1.0 9.40 5.0 27.0 15.6 0.075 P6KE12 10.8 13.2 1.0 9.72 5.0 24.0 17.3 0.078 P6KE12A 11.4 12.6 1.0 10.2 5.0 25.0 16.7 0.078 P6KE13 11.7 14.3 1.0 10.5 5.0 22.0 19.0 0.081 P6KE13A 12.4 13.7 1.0 11.1 5.0 23.0 18.2 0.081 P6KE15 13.5 16.5 1.0 12.1 5.0 19.0 22.0 0.084 P6KE15A 14.3 15.8 1.0 12.8 5.0 20.0 21.2 0.084 P6KE16 14.4 17.6 1.0 12.9 5.0 18.0 23.5 0.086 P6KE16A 15.2 16.8 1.0 13.6 5.0 19.0 22.5 0.086 P6KE17 15.3 18.7 1.0 13.7 5.0 17.0 25.0 0.087 P6KE17A 16.2 17.9 1.0 14.5 5.0 18.0 24.0 0.087 P6KE18 16.2 19.8 1.0 14.5 5.0 16.0 26.5 0.088 P6KE18A 17.1 18.9 1.0 15.3 5.0 17.0 25.5 0.088 P6KE20 18.0 22.0 1.0 16.2 5.0 14.0 29.1 0.090 P6KE20A 19.0 21.0 1.0 17.1 5.0 15.0 27.7 0.090 Publication Order Number: [P6KE6.8-600A] ©Bruckewell Technology Corporation Rev. A -2014 P6KE6.8-600A Transient Voltage Suppressor VBR : 6.8 - 600 Volts PPK : 600 Watts ELECTRICAL CHARACTERISTICS (Rating at 25ºC ambient temperature unless otherwise specified) Working Maximum Maximum Maximum Maximum Breakdown Voltage Peak Reverse Clamping Reverse Temperature @ It ( Note 1 ) Reverse Leakage @ Voltage @ Current Co-efficient Type No. Voltage VRWM IRSM of VBR VBR (V) It VRWM IR IRSM VRSM Min Max (mA) (V) (μA) (A) (V) (% / °C) P6KE22 19.8 24.2 1.0 17.8 5.0 13.0 31.9 0.092 P6KE22A 20.9 23.1 1.0 18.8 5.0 14.0 30.6 0.092 P6KE24 21.6 26.4 1.0 19.4 5.0 12.0 34.7 0.094 P6KE24A 22.8 25.2 1.0 20.5 5.0 13.0 33.2 0.094 P6KE27 24.3 29.7 1.0 21.8 5.0 11.0 39.1 0.096 P6KE27A 25.7 28.4 1.0 23.1 5.0 11.2 37.5 0.096 P6KE30 27.0 33.0 1.0 24.3 5.0 10.0 43.5 0.097 P6KE30A 28.5 31.5 1.0 25.6 5.0 10.0 41.4 0.097 P6KE33 29.7 36.6 1.0 26.8 5.0 9.0 47.7 0.098 P6KE33A 31.4 34.7 1.0 28.2 5.0 9.0 45.7 0.098 P6KE36 32.4 39.6 1.0 29.1 5.0 8.0 52.0 0.099 P6KE36A 34.2 37.8 1.0 30.8 5.0 8.4 49.9 0.099 P6KE39 35.1 42.9 1.0 31.6 5.0 7.4 56.4 0.100 P6KE39A 37.1 41.0 1.0 33.3 5.0 7.8 53.9 0.100 P6KE43 38.7 47.3 1.0 34.8 5.0 6.8 61.9 0.101 P6KE43A 40.9 45.2 1.0 36.8 5.0 7.1 59.3 0.101 P6KE47 42.3 51.7 1.0 38.1 5.0 6.2 67.8 0.101 P6KE47A 44.7 49.4 1.0 40.2 5.0 6.5 64.8 0.101 P6KE51 45.9 56.1 1.0 41.3 5.0 5.7 73.5 0.102 P6KE51A 48.5 53.6 1.0 43.6 5.0 6.0 70.1 0.102 P6KE56 50.4 61.6 1.0 45.4 5.0 5.2 80.5 0.103 P6KE56A 53.2 58.8 1.0 47.8 5.0 5.5 77.0 0.103 P6KE62 55.8 68.2 1.0 50.2 5.0 4.7 89.0 0.104 P6KE62A 58.9 65.1 1.0 53.0 5.0 5.0 85.0 0.104 P6KE68 61.2 74.8 1.0 55.1 5.0 4.3 98.0 0.104 P6KE68A 64.6 71.4 1.0 58.1 5.0 4.6 92.0 0.104 P6KE75 67.5 82.5 1.0 60.7 5.0 3.9 108 0.105 P6KE75A 71.3 78.8 1.0 64.1 5.0 4.1 103 0.105 P6KE82 73.8 90.2 1.0 66.4 5.0 3.6 118 0.105 Publication Order Number: [P6KE6.8-600A] ©Bruckewell Technology Corporation Rev. A -2014 P6KE6.8-600A Transient Voltage Suppressor VBR : 6.8 - 600 Volts PPK : 600 Watts ELECTRICAL CHARACTERISTICS (Rating at 25ºC ambient temperature unless otherwise specified) Working Maximum Maximum Maximum Maximum Breakdown Voltage Peak Reverse Clamping Reverse Temperature @ It ( Note 1 ) Reverse Leakage @ Voltage @ Current Co-efficient Type No. Voltage VRWM IRSM of VBR VBR (V) It VRWM IR IRSM VRSM Min Max (mA) (V) (μA) (A) (V) (% / °C) P6KE82A 77.9 86.1 1.0 70.1 5.0 3.7 113 0.105 P6KE91 81.9 100 1.0 73.7 5.0 3.2 131 0.106 P6KE91A 86.5 95.5 1.0 77.8 5.0 3.4 125 0.106 P6KE100 90.0 110 1.0 81.0 5.0 2.9 144 0.106 P6KE100A 95.0 105 1.0 85.5 5.0 3.1 137 0.106 P6KE110 99.0 121 1.0 89.2 5.0 2.7 158 0.107 P6KE110A 105 116 1.0 91.0 5.0 2.8 152 0.107 P6KE120 108 132 1.0 97.2 5.0 2.4 173 0.107 P6KE120A 114 126 1.0 102 5.0 2.5 165 0.107 P6KE130 117 143 1.0 105 5.0 2.2 187 0.107 P6KE130A 124 137 1.0 111 5.0 2.3 179 0.107 P6KE150 135 165 1.0 121 5.0 2.0 215 0.108 P6KE150A 143 158 1.0 128 5.0 2.0 207 0.108 P6KE160 144 176 1.0 130 5.0 1.8 230 0.108 P6KE160A 152 168 1.0 136 5.0 1.9 219 0.108 P6KE170 153 187 1.0 138 5.0 1.7 244 0.108 P6KE170A 162 179 1.0 145 5.0 1.8 234 0.108 P6KE180 162 198 1.0 146 5.0 1.6 258 0.108 P6KE180A 171 189 1.0 154 5.0 1.7 246 0.108 P6KE200 180 220 1.0 162 5.0 1.5 287 0.108 P6KE200A 190 210 1.0 171 5.0 1.53 274 0.108 P6KE220 198 242 1.0 175 5.0 1.16 344 0.108 P6KE220A 209 231 1.0 185 5.0 1.22 328 0.108 P6KE250 225 275 1.0 202 5.0 1.11 360 0.110 P6KE250A 237 263 1.0 214 5.0 1.16 344 0.110 P6KE300 270 330 1.0 243 5.0 0.93 430 0.110 P6KE300A 285 315 1.0 256 5.0 0.97 414 0.110 P6KE350 315 385 1.0 284 5.0 0.79 504 0.110 P6KE350A 332 368 1.0 300 5.0 0.83 482 0.110 Publication Order Number: [P6KE6.8-600A] ©Bruckewell Technology Corporation Rev. A -2014 P6KE6.8-600A Transient Voltage Suppressor VBR : 6.8 - 600 Volts PPK : 600 Watts ELECTRICAL CHARACTERISTICS (Rating at 25ºC ambient temperature unless otherwise specified) Working Maximum Maximum Maximum Maximum Breakdown Voltage Peak Reverse Clamping Reverse Temperature @ It ( Note 1 ) Reverse Leakage @ Voltage @ Current Co-efficient Type No. Voltage VRWM IRSM of VBR VBR (V) It VRWM IR IRSM VRSM Min Max (mA) (V) (μA) (A) (V) (% / °C) P6KE400 360 440 1.0 324 5.0 0.70 574 0.110 P6KE400A 380 420 1.0 342 5.0 0.73 548 0.110 P6KE440 396 484 1.0 356 5.0 0.95 631 0.110 P6KE440A 418 462 1.0 376 5.0 1.00 602 0.110 P6KE480 432 528 1.0 389 5.0 0.88 686 0.110 P6KE480A 456 504 1.0 408 5.0 0.90 658 0.110 P6KE510 459 561 1.0 413 5.0 0.82 729 0.110 P6KE510A 485 535 1.0 434 5.0 0.86 698 0.110 P6KE530 477 583 1.0 457 5.0 0.76 798 0.110 P6KE530A 503 556.5 1.0 477 5.0 0.80 725 0.110 P6KE540 486 594 1.0 437 5.0 0.78 772 0.110 P6KE540A 513 567 1.0 459 5.0 0.81 740 0.110 P6KE550 495 605 1.0 470 5.0 0.76 836 0.110 522.5 577.5 1.0 495 5.0 0.80 760 0.110 P6KE600 540 660 1.0 490 5.0 0.71 911 0.110 P6KE600A 570 630 1.0 512 5.0 0.75 828 0.110 P6KE550A Note: ( 1 ) VBR measured after It applied for 300 μs., It = square wave pulse or equivalent. ( 2 ) VF = 3.5 Vmax., IF = 50 Amps. ( 6.8 Volts thru 91 Volts ); VF = 5.0 Vmax., IF = 50 Amps. ( 100 Volts thru 440 Volts ) add VF = 6.5 Vmax. IF = 50 Amps ( 480 Volts thru 600 Volts). PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. ( 3 ) For Bipolar types moving VR of 10 Volts and under, the IR limit is doubled. ( 4 ) "6KE" will be omitted in marking on the diode. Publication Order Number: [P6KE6.8-600A] ©Bruckewell Technology Corporation Rev. A -2014 P6KE6.8-600A Transient Voltage Suppressor VBR : 6.8 - 600 Volts PPK : 600 Watts ■RATING AND CHARACTERISTIC CURVES ( P6KE SERIES ) FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE FIG.5 - PULSE WAVEFORM FIG. 6 - TYPICAL JUNCTION CAPACITANCE UNI-DIRECTIONAL Publication Order Number: [P6KE6.8-600A] ©Bruckewell Technology Corporation Rev. A -2014 P6KE6.8-600A Transient Voltage Suppressor VBR : 6.8 - 600 Volts PPK : 600 Watts Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [P6KE6.8-600A] ©Bruckewell Technology Corporation Rev. A -2014