ESDFN2105VlL

ESDFN2105VL
Single Line ESD Protection Diode with Low Capacitance
Description
The ESDFN2105VL is designed to replace multilayer
varistors (MLVs) in portable applications such as cell
phones,notebook computers,and PDA’s.They feature
large cross-sectional area junctions for conducting high
transient currents,offer desirable electrical
characteristics for board level protection,such as fast
response time,lower operating voltage,lower clamping
voltage and no device degradation when compared to
MLVs.
Features
• Equivalent to 0201 package
• Low Capacitance 0.55pF
• Small package for use in portable electionics
• Low Leakage current
Graphic symbol
• These are Pb−Free Devices
• RoHS Compliant Package
Applications
• Cellular phones handsets and Accessories
• PDA’s
• MP3 players
• Digital cameras
• Portable applications
• Mobile telephone
Complies with the following standards
• IEC61000-4-2
• Level 4 15 kV (air discharge)
8 kV(contact discharge)
• MIL STD 883E - Method 3015-7 Class 3
• 25 kV HBM (Human Body Model)
Packing &Order Information
3,000/Reel
Publication Order Number: [ESDFN2105VL]
© Bruckewell Technology Corporation Rev. A -2016
ESDFN2105VL
Single Line ESD Protection Diode with Low Capacitance
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Absolute Ratings (Tamb=25°C )
Symbol
Parameter
IEC 61000-4-2 (ESD) Contact
Value
Unit
8
kV
200
mW
PD
Total Power Dissioation on FR-5 Board (Note 1)
TJ
Maximum junction temperature
-55 to +155
°C
TSTG
Storage Temperature Range
-55 to +155
°C
TL
Maximum lead temperature for soldering during 10s
260
°C
Stresses exceeding Maximum Ratings may damage the device.Maximum Ratings are stress ratings only.
Functional operation above the Recommended Operating Conditions is not implied.Extended exposure to
stresses above the Recommended Operating Conditions may affect device reliability.
1.FR-5=1.0*0.75*0.62 in.
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.VF = 0.9V
at IF = 10mA
VBR
Part Numbers
ESDFN2105VL
Min.
6.0
Typ.
V
Max.
7.0
8.5
Vc
Cj
μA
@IppMAX=2.5A
V
Typ. 0v bias
PF
1
18.4
0.5
IT
VRWM
IR
mA
V
1
5.0
1.VBR is measured with a pulse test current IT at an ambient temperature of 25°C
2.Surge current waveform per Figure 5.
3.For test procedure see Figures 3 and 4
Publication Order Number: [ESDFN2105VL]
© Bruckewell Technology Corporation Rev. A -2016
ESDFN2105VL
Single Line ESD Protection Diode with Low Capacitance
■Typical
Device Characteristics
Publication Order Number: [ESDFN2105VL]
© Bruckewell Technology Corporation Rev. A -2016
ESDFN2105VL
Single Line ESD Protection Diode with Low Capacitance
■Typical
Device Characteristics
Publication Order Number: [ESDFN2105VL]
© Bruckewell Technology Corporation Rev. A -2016
ESDFN2105VL
Single Line ESD Protection Diode with Low Capacitance
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: [ESDFN2105VL]
© Bruckewell Technology Corporation Rev. A -2016
Similar pages