BC807 40

BC807-40
TRANSISTOR PNP BIPOLAR 45V
Features
• High current
• Low voltage
• General-purpose switching and amplification
• RoHS compliant package
Mechanical Data
• Case: SOT-23 Molded plastic
• Epoxy: UL94V-O rate flame retardant
Packing & Order Information
3,000/Reel
Graphic symbol
Publication Order Number: [BC807-40]
© Bruckewell Technology Corporation Rev. A -2014
BC807-40
TRANSISTOR PNP BIPOLAR 45V
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Maximum Ratings (Tc=25°C unless otherwise noted)
Symbol
Parameter
BC807-40
Unit
VCEO
Collector-Emitter Voltage
-45
Vdc
VCBO
Collector-Base Voltage
-50
Vdc
VEBO
Emitter-Base Voltage
-5
Vdc
IC
Collector Current—Continuous
-500
mAdc
Total Device Dissipation on FR-5 Board(1) TA=25°C
225
mW
derate above25°C
1.8
mW/°C
Total Device Dissipation on Alumina Substrate 300 mW
300
derate above25℃
2.4
mW
mW/°C
RθJA
Thermal Resistance Junction to Ambient
417
°C/W
TJ,Tstg
Junction and Storage Temperature
-55 to +150
°C
PD
PD
OFF CHARACTERISTICS
Symbol
Parameter
V(BR)CEO
Collector-Emitter Breakdown Voltage
(Ic= -10mAdc,IB=0)
V(BR)CBS
Collector-Base Breakdown Voltage
(Ic= -10μAdc,VEB=0)
V(BR)EBO
Emitter-Base Breakdown Voltage
(IE= -1.0μAdc,Ic=0)
ICBO
MIN
TYP
UNIT
-45
Vdc
-50
Vdc
-5
Vdc
Collector Cutoff Current (VCB= -20v) -100 nA
(VCB= -20Vdc,TA=150°C)
ON CHARACTERISTICS
Symbol
Parameter
MAX
MIN
TYP
-100
nA
-5
uA
MAX
UNIT
DC Current Gain
HFE
VCE(sat)
(Ic= -100mAdc,VCE= -1.0Vdc)
250
(Ic= -500mAdc,VCE= -1.0Vdc)
40
Collector-Emitter Saturation Voltage
(Ic= -500mAdc, IB= -50mAdc)
VBE(on)
Base-Emitter Voltage
(Ic= -500mAdc, VCE= -1.0Vdc)
Publication Order Number: [BC807-40]
600
-0.7
Vdc
-1.2
V
© Bruckewell Technology Corporation Rev. A -2014
BC807-40
TRANSISTOR PNP BIPOLAR 45V
SMALL-SIGNAL CHARACTERISTICS
Symbol
Parameter
fT
Current-Gain-Bandwidth Product
(Ic= -10mAdc,VCE= -5.0Vdc,f=100MHz)
Cobo
Output Capacitance
(VCB= -10Vdc, f=1.0MHz)
MIN
TYP
MAX
UNIT
MHz
100
10
pF
NOTE:
1. FR-5=1.0×0.75×0.062in.
2. Alumina=0.4×0.3×0.024in.99.5%alumina.
Publication Order Number: [BC807-40]
© Bruckewell Technology Corporation Rev. A -2014
BC807-40
TRANSISTOR PNP BIPOLAR 45V
■RATINGS AND CHARACTERISTIC CURVES
VCE = −1 V
IC/IB = 10
(1) Tamb = 150 °C
(1) Tamb = −55 °C
(2) Tamb = 25 °C
(2) Tamb = 25 °C
(3) Tamb = −55 °C
(3) Tamb = 150 °C
IC/IB = 10
Tamb = 25 °C
(1) Tamb = 150 °C
(1) IB = −12.0 mA
(2) Tamb = 25 °C
(2) IB = −10.8 mA
(3) Tamb = −55 °C
(3) IB = −9.6 mA
(4) IB = −8.4 mA
(5) IB = −7.2 mA
(6) IB = −6.0 mA
(7) IB = −4.8 mA
(8) IB = −3.6 mA
(9) IB = −2.4 mA
(10) IB = −1.2 mA
Publication Order Number: [BC807-40]
© Bruckewell Technology Corporation Rev. A -2014
BC807-40
TRANSISTOR PNP BIPOLAR 45V
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: [BC807-40]
© Bruckewell Technology Corporation Rev. A -2014