F-XM-W25 Series 0.25W, FIXED INPUT, ISOLATED&UNREGULATED SINGLE OUTPUT DC-DC CONVERTER PRODUCT PROGRAM Model Input Voltage (V) Output Voltage (V) Output Current max (MA) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) F0503XM-W25 4.5-5.5 3.3 75.7 3000 100 66 FEATURES F0505XM-W25 4.5-5.5 5 50 3000 100 66 RoHS compliant F0507XM-W25 4.5-5.5 7.2 34.72 3000 100 66 F0509XM-W25 4.5-5.5 9 27.77 3000 100 68 F0512XM-W25 4.5-5.5 12 20.83 3000 100 68 F0515XM-W25 4.5-5.5 15 16.67 3000 100 68 F0518XM-W25 4.5-5.5 18 13.88 3000 100 68 F0524XM-W25 4.5-5.5 24 10.41 3000 100 70 F1203XM-W25 10.8-13.2 3.3 75.7 3000 100 66 F1205XM-W25 10.8-13.2 5 50 3000 100 67 F1207XM-W25 10.8-13.2 7.2 34.72 3000 100 68 F1209XM-W25 10.8-13.2 9 27.77 3000 100 68 F1212XM-W25 10.8-13.2 12 20.83 3000 100 68 F1215XM-W25 10.8-13.2 15 16.67 3000 100 69 F1218XM-W25 10.8-13.2 18 13.88 3000 100 70 APPLICATIONS F1224XM-W25 10.8-13.2 24 10.41 3000 100 72 1. Datasheets are updated as needed and as such, pecifications F2403XM-W25 21.6-26.4 3.3 75.7 3000 100 67 F2405XM-W25 21.6-26.4 5 50 3000 100 67 F2407XM-W25 21.6-26.4 7.2 34.72 3000 100 67 F2409XM-W25 21.6-26.4 9 27.77 3000 100 69 F2412XM-W25 21.6-26.4 12 20.83 3000 100 69 F2415XM-W25 21.6-26.4 15 16.67 3000 100 69 F2418XM-W25 21.6-26.4 18 13.88 3000 100 69 F2424XM-W25 21.6-26.4 24 10.41 3000 100 69 ◆ 4 Pin SIP Package ◆ Low ripple and noise ◆ High efficiency up to 72% ◆ Operating temperature -40℃ to +85℃ ◆ Input/Output isolation 3000VDC ◆ Pin compatible with multiple manufacturers ◆ MODEL SELECTION ① ② ③ ④ ⑤ ⑥ F 05 03 X M -W25 ①Product Series ③Output Voltage ⑤Mini SIP4 Package ②Input Voltage ④Fixed Input ⑥Rated Power are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by microdc; refer to www.microdc.cn for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,nominal input voltage and at rated output load unless otherwise specified. 5. microdc may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with microdc’s Standard Terms of Sale available at www.microdc.cn. MICRODC RESERVES THE COPYRIGHT http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 3 F-XM-W25 Series Input Specifications Parameters Nominal Voltage range Typical 5 4.5-5.5 12 10.8-13.2 15 13.5–16.5 24 21.6-26.4 Filter Maximum Units VDC Capacitor Turn on transient process time 25 Start up time 200 Absolute maximum rating 5 Vin 7 12 Vin 15 15 Vin 17 24 Vin Peak input voltage time ms ms VDC 28 100 ms General Specifications Parameters Conditions Typical Switching frequency 100% load 80 Operating temperature Without derating Maximum Units KHz Storage temperature -40～+85 ℃ -40～+125 ℃ Maximum case temperature Cooling 100 ℃ 95 % F g Free air convection Humidity Case material Non-conductive black plastic Weight 1.5 Dimensions (Lx W x H) 0.46 x 0.24 x 0.38 inches 11.68 x 6.00 x 9.65 mm >2 010 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 ℃) MTBF NOTE: All specifications in this data sheet are measured at an ambient temperature of 25° 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. specified. Output Specifications Parameters Conditions Voltage accuracy Typical Maximum ±3 Short circuit protection Units % Momentary (1sec) Line voltage regulation For 1% change of Vin ±1.2 % of Vin Load voltage regulation Load 20 – 100% ±10 % Load 20 – 100% ±20 % ±0.02 %/ C 100 mV p-p Load voltage regulation 3.3V output model Temperature coefficient Ripple & noise At 20MHz Bandwidth Capacitive load Rising time http://www.microdc.cn 100 50 Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 μF ms Page 2 of 3 F-XM-W25 Series Isolation Specifications Parameters Conditions Tested I/O voltage 3 sec Typical Rated Units 3000 VDC Resistance > 1000 MOhm Capacitance 60 pF Recommended footprint details TUBE OUTLINE DIMENSIONS 4 PIN SIP Package 4 PIN SIP Tube Unless otherwise stated all dimensions in inches (mm) ±0.5mm. Tube length (4 Pin SIP) : 20.47 (520mm ±2mm). Dimensions Tube Quantity :25 Pin Out Specifications Microdc Professional Power Module,Inc. Tel:0086-20-86000646 E-mail:[email protected] Pin Single 1 - V Input 2 +V Input 3 - V Output 4 +V Output RoHS COMPLIANT INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Website:http://www.microdc.cn Microdc Professional Power module,Inc.makes no representation that the use of its products in the circuits described herein, or the use of other Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. technical information contained herein, will not infringe upon existing or REACH COMPLIANT INFORMATION future patent rights. Specifications are subject to change without notice. ©2010 Microdc Professional Power Module, Inc. Guangzhou This series has proven that this product does not contain harmful chemicals, it also has harmful chemical substances through the registration, inspection and approval. http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 3 of 3