For more information, please visit the product page. date 06/12/2015 page 1 of 3 MODEL: CEP-2202A │ DESCRIPTION: PIEZO BUZZER INDICATOR FEATURES • through-hole pins • 12 Vdc rating • 3.0 kHz rated frequency SPECIFICATIONS parameter conditions/description min rated voltage max 12 operating voltage current consumption typ 3 at rated voltage rated frequency 2,500 sound pressure level at 30 cm, rated voltage dimensions Ø24.2 x 16.0 3,000 units Vdc 20 Vdc 11 mA 3,500 Hz 85 dB mm weight material ABS UL94 1/16” HB High Heat (black) terminal pin type (Sn plating) 5.0 g operating temperature -30 85 °C storage temperature -40 95 °C max units 380 °C RoHS Notes: 2011/65/EU 1. All specifications measured at 5~35°C, humidity at 45~85%, under 86~106kPa pressure, unless otherwise noted. SOLDERABILITY parameter conditions/description min hand soldering2 for maximum 5 seconds 330 Notes: 2. Not recommended for wave soldering cui.com typ For more information, please visit the product page. CUI Inc │ MODEL: CEP-2202A │ DESCRIPTION: PIEZO BUZZER INDICATOR MECHANICAL DRAWING units: mm tolerance: ±0.5 mm PERFORMANCE CURVES P: Voltage vs. Sound Pressure Level I: Voltage vs. Current Consumption cui.com date 06/12/2015 │ page 2 of 3 For more information, please visit the product page. CUI Inc │ MODEL: CEP-2202A │ DESCRIPTION: PIEZO BUZZER INDICATOR date 06/12/2015 │ page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 09/12/2006 1.01 applied new spec template 06/12/2015 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.