&DϬϱϰϬͲD &DϬϱϲϬͲD Ϭ͘ϱ^ƵƌĨĂĐĞDŽƵŶƚ^ĐŚŽƚƚŬLJĂƌƌŝĞƌZĞĐƚŝĨŝĞƌƐͲϰϬsΕϲϬs PRIMARY CHARACTERISTICS VRRM 40V,60V IO 0.5A VF 0.5V,0.65V TJ,Max 125℃,150℃ SOD-123-L 0DUNLQJ&RGH ([)00 Pin1 Pin2 FEATURES PACKAGE cathode anode 1 2 MECHANICAL DATA Batch process design, excellent Case：Molded plastic,SOD-123-L power dissipation offers better Polarity：Shown above reverse leakage current and thermal Terminals :Plated terminals, resistance. solderable per MIL-STD-750,Method Low profile surface mounted 2026 application in order to optimize board space. Epoxy : UL94-V0 rated flame retardant Low power loss, high efficiency High current capability, low forward voltage drop. High surge capability Guardring for overvoltage protection. Ultra high-speed switching Moisture Sensitivity Level 1 Maximum ratings and Electrical Characteristics (AT T=25A℃ unless otherwise noted) SYMBOL VRRM FM0540-M 40 FM0560-M 60 UNITS Volts Maximum RMS Volts VRMS 28 42 Volts Maximum DC Blocking Voltage VDC 40 60 RATINGS Maximum Recurrent Peak Reverse Voltage Volts Maximum Average Forward Current Peak Forward Surge Current IFM (surge):8.3 ms single half IO 0.5 Amps IFSM 15 Amps Type Diodel Junction Capacitance(Note 1) CJ Operating Storage Temperature Range TJ Storage Temperature Range 120 -55~125 pF -55~150 -55~175 TSTG ℃ ℃ ELECTRICAL CHARACTERISTICS (At TA = 25℃ unless otherwise noted) CHARACTERISTICS Marking Code Maximum Forward Voltage @IF= 0.5A Reverse current VR=VRRM Tj=25℃ V R=VRRM Tj=100℃ SYMBOL VF FM0540-M 04 0.5 IR FM0560-M 06 0.65 0.5 10 UNITS Volts mAmps Note 1 : f=1MHz and applied 4V DC reverse voltage 2015.ϭϬ www.willas.com.tw Rev.&0Ϯ &DϬϱϰϬͲD &DϬϱϲϬͲD Ϭ͘ϱ^ƵƌĨĂĐĞDŽƵŶƚ^ĐŚŽƚƚŬLJĂƌƌŝĞƌZĞĐƚŝĨŝĞƌƐͲϰϬsΕϲϬs Rating and characteristic curves (FM0540-M THRU FM0560-M) 50 0.5 FM V V 40 60 -M 40 05 -M 60 05 FM 0.2 0 0 20 200 ° T T T 0 50 5 T 250 T 200 T 50 0 T 2015.ϭϬ T www.willas.com.tw Rev.&0Ϯ &DϬϱϰϬͲD &DϬϱϲϬͲD Ϭ͘ϱ^ƵƌĨĂĐĞDŽƵŶƚ^ĐŚŽƚƚŬLJĂƌƌŝĞƌZĞĐƚŝĨŝĞƌƐͲϰϬsΕϲϬs Outline Drawing SOD-123-L .154(3.90) .138(3.50) .012(0.30)Typ. .075(1.90) .060(1.50) .067(1.70) .051(1.30) .028(0.70) Typ. .028(0.70) Typ. Dimensions in inches and (millimeters) 2015.ϭϬ www.willas.com.tw Rev.C Rev.&0Ϯ &DϬϱϰϬͲD &DϬϱϲϬͲD Ϭ͘ϱ^ƵƌĨĂĐĞDŽƵŶƚ^ĐŚŽƚƚŬLJĂƌƌŝĞƌZĞĐƚŝĨŝĞƌƐͲϰϬsΕϲϬs Suggested Soldering Pad Layout SOD-123-L 0.075 (1.90) 0.075 (1.90) 0.055 (1.40) Dimensions in inches and (millimeters) 2015.ϭϬ www.willas.com.tw RevA Rev.&0Ϯ &DϬϱϰϬͲD &DϬϱϲϬͲD Ϭ͘ϱ^ƵƌĨĂĐĞDŽƵŶƚ^ĐŚŽƚƚŬLJĂƌƌŝĞƌZĞĐƚŝĨŝĞƌƐͲϰϬsΕϲϬs Reel packing PACKAGE SOD-123 REEL SIZE 7" REEL (pcs) COMPONENT SPACING (m/m) 4.0 2,500 BOX (pcs) 25,000 INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (m/m) (m/m) (m/m) (pcs) (kg) 183*183*123 178 382*262*387 200,000 9.5 Packing information P0 P1 d E F B A W P D2 D1 T C W1 D unit:mm Item Symbol Tolerance Carrier width Carrier length Carrier depth Sprocket hole 13" Reel outside diameter 13" Reel inner diameter 7" Reel outside diameter 7" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width Reel width A B C d D D1 D D1 D2 E F P P0 P1 T W W1 0.1 0.1 0.1 0.1 2.0 min 2.0 min 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.3 1.0 SOD-123/ 1.90 3.70 1.68 1.50 178.00 62.00 13.00 1.75 3.50 4.00 4.00 2.00 0.23 8.00 11.40 Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. 2015.ϭϬ www.willas.com.tw Rev.&0Ϯ &DϬϱϰϬͲD Ϭ͘ϱ^ƵƌĨĂĐĞDŽƵŶƚ^ĐŚŽƚƚŬLJĂƌƌŝĞƌZĞĐƚŝĨŝĞƌƐͲϰϬsΕϲϬs &DϬϱϲϬͲD Ordering Information: Device PN Part Number ‐T(1)G(2)‐WS Note: (1) Packing code, Tape & Reel Packing Packing Tape&Reel: 2.5 Kpcs/Reel (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.ϭϬ www.willas.com.tw Rev.&0Ϯ