MSD30P06 P-Channel 60-V (D-S) MOSFET Description The MSD30P06 is a N-channel enhancement-mode MOSFET , providing the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost effectiveness. The TO-252 package is universally preferred for all commercial-industrial applications Features • Low RDS(on) provides higher efficiency and extends battery life • Low thermal impedance copper lead frame DPAK saves board space • Fast switching speed • High performance trench technology • RoHS compliant package Packing & Order Information Part No./ T：2,500/Reel Part No./ R：80/Tube , 4,000/Box Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings (Tc=25°C unless otherwise noted) Symbol Parameter Value Unit VDS Drain-Source Voltage -60 V VGS Gate-Source Voltage ±20 V ID Continuous Drain Current @ TC=25°C 28 A IDM Pulsed Drain Current ±50 A IS Continuous Source Current (Diode Conduction) -30 A Publication Order Number: [MSD30P06] © Bruckewell Technology Corporation Rev. A -2014 MSD30P06 P-Channel 60-V (D-S) MOSFET Absolute Maximum Ratings (Tc=25°C unless otherwise noted) Symbol Parameter PW Power Dissipation (TC=25°C) TJ/TSTG Operating Junction and Storage Temperature Value Unit 50 W -55 to +175 °C Note: 1. Repetitive rating; pulse width limited by maximum junction temperature. Thermal Characteristics (Tc=25°C unless otherwise noted) Symbol Parameter Maximum RθJc Maximum Junction-to-Case 3.0 RθJA Maximum Junction-to-Ambient 50 Static Characteristics Symbol Test Conditions VGS RDS(ON) IDSS VDS = VGS, ID = 250μA VGS = -10 V , ID = 28 A VGS = -4.5 V , ID = -24 A VDS = -48 V , VGS = 0 V VDS = -48 V , VGS = 0 V , Tj = 55°C Units °C/W Min Typ. Max. Units -1.0 -- -- V -- -- -- -- 54 69 -1 -10 mΩ uA ID(ON) VDS = -5 V, VGS = -10 V -20 -- -- A IGSS VDS = 0 V , VGS = ±20 V -- -- ±100 nA Gfs VDS = -15 V , ID = -28 A -- 8 -- S VSD IS = 2.5 A, VGS = 0 V -- -- -1.2 V Min Typ. Max. Units -- 8 -- ns Dynamic Characteristics Symbol Test Conditions td(on) tr VDD= -30 V, ID = -1.0 A, -- 10 -- ns td(off) RL = 30ohm , VGEN = -10 V -- 35 -- ns -- 12 -- ns -- 18 -- nC -- 5 -- nC -- 2 -- tf Qg Qgs VDS = -30 V , ID = -2.8 A, VGS = -4.5 V Qgd Publication Order Number: [MSD30P06] © Bruckewell Technology Corporation Rev. A -2014 MSD30P06 P-Channel 60-V (D-S) MOSFET ■Characteristics Curve FIG.1-OUTPUT CHARACTERISTICS FIG.2-TRANSFER CHARACTERISTICS FIG.3-ON RESISTANCE VS DRAIN CURRENT FIG.4-CAPACITANCE FIG.5-GATE CHARGE FIG.6-ON-RESISTANCE VS. JUNCTION TEMPERATURE Publication Order Number: [MSD30P06] © Bruckewell Technology Corporation Rev. A -2014 MSD30P06 P-Channel 60-V (D-S) MOSFET ■Characteristics Curve FIG.7-SOURCE-DRAIN DIODE FORWARD VOLTAGE FIG.8-ON-RESISTANCE VS GATE-TO SOURCE VOLTAGE FIG.11-TRANSIENT THERMAL RESPONSE CURVE Publication Order Number: [MSD30P06] © Bruckewell Technology Corporation Rev. A -2014 MSD30P06 P-Channel 60-V (D-S) MOSFET Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [MSD30P06] © Bruckewell Technology Corporation Rev. A -2014