Datenblatt

For more information, please visit the product page.
date
05/13/2015
page
1 of 3
MODEL: CPE-502 │ DESCRIPTION: PIEZO BUZZER TRANSDUCER
FEATURES
• piezo transducer
• right-angle mount
• wide operating temperature
SPECIFICATIONS
parameter
conditions/description
min
typ
operating voltage
current consumption
at 10Vp-p, 3,300 Hz square wave
rated frequency
max
units
30
Vp-p
10
mA
3,300
sound pressure level
at 10 cm, 10Vp-p, 3,300 Hz square wave
electrostatic capacity
at 1 KHz/1 V
dimensions
25.0 x 24.0 x 10.0
11,900
dB
17,000
PC+10% glass (black)
terminal
pin type (Au plating)
22,100
pF
mm
weight
material
Hz
93
3.7
g
operating temperature
-30
115
°C
storage temperature
-40
125
°C
RoHS
Notes:
2011/65/EU
1. All specifications measured at 5~35°C, humidity at 45~85%, under 86~106kPa pressure, unless otherwise noted.
SOLDERABILITY
parameter
conditions/description
min
typ
max
units
wave soldering
see wave solder profile
255
260
265
°C
ŔŰŭťŦųŪůŨġőŰŵĻijķıƲĶƱń
5±D0Tfd!nby
Dppmjoh!cz!bjs
B>6Tfd!Nby
Ʊń
őųŦĮũŦŢŵŪůŨġIJķıƱńġŎŢŹ
5±D0Tfd!nby
IJijıŴŦŤġŎŢŹ
ŕŪŮŦġŜŴŦŤŞ
cui.com
For more information, please visit the product page.
CUI Inc │ MODEL: CPE-502 │ DESCRIPTION: PIEZO BUZZER TRANSDUCER
date 05/13/2015 │ page 2 of 3
MECHANICAL DRAWING
units: mm
tolerance: ±0.5 mm
10.0
24.0
25.0
WWYY
5.5
0.8
(2 PLCS)
5.9
3.2
12.5
FREQUENCY RESPONSE CURVE
A: frequency response. Magn dB re 20.00µPA
110
100
90
dB
80
70
60
20
200
Hz
cui.com
2K
20K
For more information, please visit the product page.
CUI Inc │ MODEL: CPE-502 │ DESCRIPTION: PIEZO BUZZER TRANSDUCER
date 05/13/2015 │ page 3 of 3
REVISION HISTORY
rev.
description
date
1.0
initial release
11/12/2007
1.01
applied new spec template
05/13/2015
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
[email protected]
CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a
life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.