UF460 Ultra Fast Power Rectifier Features • Ultrafast switching Low reverse recovery current Reduces • Switching & conduction losses Low thermal resistance • Meets MSL level 1, per J-STD-020 • Solder dip 260 °C max. 10 s, per JESD 22-A111 • RoHS compliant package Mechanical Data • Case: DO-201AD, • molded epoxy body Epoxy meets UL 94V-0 flammability rating Packing & Order Information 1,250/Ammo Tape Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Symbol UF460 Unit Maximum repetitive peak reverse voltage VRRM 600 V Working peak reverse Voltage VRWM 600 V Maximum DC blocking Voltage VDC 600 V IF(AV) 4 A IFSM 125 A TJ -55 to +150 °C TSTG -55 to +175 °C Maximum average forward rectified current Total device Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Operating junction temperature range Storage temperature range Publication Order Number: [UF460] © Bruckewell Technology Corporation Rev. A -2014 UF460 Ultra Fast Power Rectifier Electrical characteristics (Tc=25°C unless otherwise noted) Parameter Value Typical Max Symbol Instantaneous forward voltage at IF=4A, Tj=25°C at IF=4A, Tj=125°C Maximum reverse current per leg 1.1 VF 1.28 0.8 Tj=25°C Unit V 10 u’A 0.1 m’A 75 ns 50 ns IR at working peak reverse voltage Tj=125°C Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amp/ms) Trr (IF = 0.5 Amp, iR = 1.0 Amp, IREC = 0.25 Amp) Thermal characteristics (Tc=25°C unless otherwise noted) Parameter Typical thermal resistance Symbol Value RθJA 75 Rthjl 20 Unit °C/W Notes: (1) L = 10mm Publication Order Number: [UF460] © Bruckewell Technology Corporation Rev. A -2014 UF460 Ultra Fast Power Rectifier Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [UF460] © Bruckewell Technology Corporation Rev. A -2014